[PATCH 2/2] arm64: dts: ti: k3-j7200-main: Switch MAIN R5F cluster to Split-mode

Apurva Nandan posted 2 patches 2 years, 10 months ago
[PATCH 2/2] arm64: dts: ti: k3-j7200-main: Switch MAIN R5F cluster to Split-mode
Posted by Apurva Nandan 2 years, 10 months ago
From: Suman Anna <s-anna@ti.com>

J7200 SoCs has a R5F cluster in each of the MAIN and MCU domains, and both
of these are configured for LockStep mode at the moment. Switch the MAIN
R5F cluster to Split mode by default to maximize the number of R5F cores.
The MCU R5F cluster continues to be in the preferred LockStep mode.

Note that this configuration is the default for remoteproc mode (kernel
driver boots the R5F processors). These will be overridden for early-booted
remoteprocs through the corresponding IPC-only support in the K3 R5F
remoteproc driver.

Signed-off-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Apurva Nandan <a-nandan@ti.com>
---
 arch/arm64/boot/dts/ti/k3-j7200-main.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi b/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi
index 138381f43ce4..573a7f949b1d 100644
--- a/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi
@@ -797,7 +797,7 @@ watchdog1: watchdog@2210000 {
 
 	main_r5fss0: r5fss@5c00000 {
 		compatible = "ti,j7200-r5fss";
-		ti,cluster-mode = <1>;
+		ti,cluster-mode = <0>;
 		#address-cells = <1>;
 		#size-cells = <1>;
 		ranges = <0x5c00000 0x00 0x5c00000 0x20000>,
-- 
2.34.1
Re: [PATCH 2/2] arm64: dts: ti: k3-j7200-main: Switch MAIN R5F cluster to Split-mode
Posted by Nishanth Menon 2 years, 10 months ago
On 12:07-20230329, Apurva Nandan wrote:
> From: Suman Anna <s-anna@ti.com>
> 
> J7200 SoCs has a R5F cluster in each of the MAIN and MCU domains, and both
> of these are configured for LockStep mode at the moment. Switch the MAIN
> R5F cluster to Split mode by default to maximize the number of R5F cores.
> The MCU R5F cluster continues to be in the preferred LockStep mode.
> 
> Note that this configuration is the default for remoteproc mode (kernel
> driver boots the R5F processors). These will be overridden for early-booted
> remoteprocs through the corresponding IPC-only support in the K3 R5F
> remoteproc driver.

Same comment as #1.

> 
> Signed-off-by: Suman Anna <s-anna@ti.com>
> Signed-off-by: Apurva Nandan <a-nandan@ti.com>
> ---
>  arch/arm64/boot/dts/ti/k3-j7200-main.dtsi | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi b/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi
> index 138381f43ce4..573a7f949b1d 100644
> --- a/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi
> +++ b/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi
> @@ -797,7 +797,7 @@ watchdog1: watchdog@2210000 {
>  
>  	main_r5fss0: r5fss@5c00000 {
>  		compatible = "ti,j7200-r5fss";
> -		ti,cluster-mode = <1>;
> +		ti,cluster-mode = <0>;
>  		#address-cells = <1>;
>  		#size-cells = <1>;
>  		ranges = <0x5c00000 0x00 0x5c00000 0x20000>,
> -- 
> 2.34.1
> 

-- 
Regards,
Nishanth Menon
Key (0xDDB5849D1736249D) / Fingerprint: F8A2 8693 54EB 8232 17A3  1A34 DDB5 849D 1736 249D