1. Patchew
  2. linux
  3. View series

[PATCH] clocksource/drivers/imx-gpt: Use only a single name for functions

Uwe Kleine-König posted 1 patch 1 year ago
There is a newer version of this series
drivers/clocksource/timer-imx-gpt.c | 18 ++++++------------
1 file changed, 6 insertions(+), 12 deletions(-)
[PATCH] clocksource/drivers/imx-gpt: Use only a single name for functions
Posted by Uwe Kleine-König 1 year ago 
When looking at the data structs defining the different behaviours of
the GPT blocks in different SoCs it's not helpful that the same
functions are used with different names.

So drop the cpp defines and use the original names.

This commit was generated using:

	perl -i -e 'my %m; while (<>) { if (/^#define (imx[a-zA-Z0-6_]*)\s(imx[a-zA-Z0-6_]*)/) {$m{$1} = $2; } else { foreach my $f (keys %m) {s/$f/$m{$f}/; } print; } }' drivers/clocksource/timer-imx-gpt.c

This patch has no effect on the generated code.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
---
 drivers/clocksource/timer-imx-gpt.c | 18 ++++++------------
 1 file changed, 6 insertions(+), 12 deletions(-)

diff --git a/drivers/clocksource/timer-imx-gpt.c b/drivers/clocksource/timer-imx-gpt.c
index 7b2c70f2f353..8ad0bda42029 100644
--- a/drivers/clocksource/timer-imx-gpt.c
+++ b/drivers/clocksource/timer-imx-gpt.c
@@ -93,13 +93,11 @@ static void imx1_gpt_irq_disable(struct imx_timer *imxtm)
 	tmp = readl_relaxed(imxtm->base + MXC_TCTL);
 	writel_relaxed(tmp & ~MX1_2_TCTL_IRQEN, imxtm->base + MXC_TCTL);
 }
-#define imx21_gpt_irq_disable imx1_gpt_irq_disable
 
 static void imx31_gpt_irq_disable(struct imx_timer *imxtm)
 {
 	writel_relaxed(0, imxtm->base + V2_IR);
 }
-#define imx6dl_gpt_irq_disable imx31_gpt_irq_disable
 
 static void imx1_gpt_irq_enable(struct imx_timer *imxtm)
 {
@@ -108,13 +106,11 @@ static void imx1_gpt_irq_enable(struct imx_timer *imxtm)
 	tmp = readl_relaxed(imxtm->base + MXC_TCTL);
 	writel_relaxed(tmp | MX1_2_TCTL_IRQEN, imxtm->base + MXC_TCTL);
 }
-#define imx21_gpt_irq_enable imx1_gpt_irq_enable
 
 static void imx31_gpt_irq_enable(struct imx_timer *imxtm)
 {
 	writel_relaxed(1<<0, imxtm->base + V2_IR);
 }
-#define imx6dl_gpt_irq_enable imx31_gpt_irq_enable
 
 static void imx1_gpt_irq_acknowledge(struct imx_timer *imxtm)
 {
@@ -131,7 +127,6 @@ static void imx31_gpt_irq_acknowledge(struct imx_timer *imxtm)
 {
 	writel_relaxed(V2_TSTAT_OF1, imxtm->base + V2_TSTAT);
 }
-#define imx6dl_gpt_irq_acknowledge imx31_gpt_irq_acknowledge
 
 static void __iomem *sched_clock_reg;
 
@@ -296,7 +291,6 @@ static void imx1_gpt_setup_tctl(struct imx_timer *imxtm)
 	tctl_val = MX1_2_TCTL_FRR | MX1_2_TCTL_CLK_PCLK1 | MXC_TCTL_TEN;
 	writel_relaxed(tctl_val, imxtm->base + MXC_TCTL);
 }
-#define imx21_gpt_setup_tctl imx1_gpt_setup_tctl
 
 static void imx31_gpt_setup_tctl(struct imx_timer *imxtm)
 {
@@ -343,10 +337,10 @@ static const struct imx_gpt_data imx21_gpt_data = {
 	.reg_tstat = MX1_2_TSTAT,
 	.reg_tcn = MX1_2_TCN,
 	.reg_tcmp = MX1_2_TCMP,
-	.gpt_irq_enable = imx21_gpt_irq_enable,
-	.gpt_irq_disable = imx21_gpt_irq_disable,
+	.gpt_irq_enable = imx1_gpt_irq_enable,
+	.gpt_irq_disable = imx1_gpt_irq_disable,
 	.gpt_irq_acknowledge = imx21_gpt_irq_acknowledge,
-	.gpt_setup_tctl = imx21_gpt_setup_tctl,
+	.gpt_setup_tctl = imx1_gpt_setup_tctl,
 	.set_next_event = mx1_2_set_next_event,
 };
 
@@ -365,9 +359,9 @@ static const struct imx_gpt_data imx6dl_gpt_data = {
 	.reg_tstat = V2_TSTAT,
 	.reg_tcn = V2_TCN,
 	.reg_tcmp = V2_TCMP,
-	.gpt_irq_enable = imx6dl_gpt_irq_enable,
-	.gpt_irq_disable = imx6dl_gpt_irq_disable,
-	.gpt_irq_acknowledge = imx6dl_gpt_irq_acknowledge,
+	.gpt_irq_enable = imx31_gpt_irq_enable,
+	.gpt_irq_disable = imx31_gpt_irq_disable,
+	.gpt_irq_acknowledge = imx31_gpt_irq_acknowledge,
 	.gpt_setup_tctl = imx6dl_gpt_setup_tctl,
 	.set_next_event = v2_set_next_event,
 };

base-commit: fe15c26ee26efa11741a7b632e9f23b01aca4cc6
-- 
2.39.2
Re: [PATCH] clocksource/drivers/imx-gpt: Use only a single name for functions
Posted by Uwe Kleine-König 10 months, 4 weeks ago 
Helo Daniel,

On Tue, Mar 28, 2023 at 11:15:14AM +0200, Uwe Kleine-König wrote:
> When looking at the data structs defining the different behaviours of
> the GPT blocks in different SoCs it's not helpful that the same
> functions are used with different names.
> 
> So drop the cpp defines and use the original names.
> 
> This commit was generated using:
> 
> 	perl -i -e 'my %m; while (<>) { if (/^#define (imx[a-zA-Z0-6_]*)\s(imx[a-zA-Z0-6_]*)/) {$m{$1} = $2; } else { foreach my $f (keys %m) {s/$f/$m{$f}/; } print; } }' drivers/clocksource/timer-imx-gpt.c
> 
> This patch has no effect on the generated code.
> 
> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>

This patch was generated against v6.3-rc1. On the upside it still
applies fine to v6.4-rc1 and even current next/master. On the downside I
didn't get any feedback on it. Is this patch still on your radar?

Best regards
Uwe

-- 
Pengutronix e.K.                           | Uwe Kleine-König            |
Industrial Linux Solutions                 | https://www.pengutronix.de/ |
Re: [PATCH] clocksource/drivers/imx-gpt: Use only a single name for functions
Posted by Daniel Lezcano 10 months, 1 week ago 
On 30/05/2023 17:31, Uwe Kleine-König wrote:
> Helo Daniel,
> 
> On Tue, Mar 28, 2023 at 11:15:14AM +0200, Uwe Kleine-König wrote:
>> When looking at the data structs defining the different behaviours of
>> the GPT blocks in different SoCs it's not helpful that the same
>> functions are used with different names.
>>
>> So drop the cpp defines and use the original names.
>>
>> This commit was generated using:
>>
>> 	perl -i -e 'my %m; while (<>) { if (/^#define (imx[a-zA-Z0-6_]*)\s(imx[a-zA-Z0-6_]*)/) {$m{$1} = $2; } else { foreach my $f (keys %m) {s/$f/$m{$f}/; } print; } }' drivers/clocksource/timer-imx-gpt.c
>>
>> This patch has no effect on the generated code.
>>
>> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
> 
> This patch was generated against v6.3-rc1. On the upside it still
> applies fine to v6.4-rc1 and even current next/master. On the downside I
> didn't get any feedback on it. Is this patch still on your radar?

Applied, thanks


-- 
<http://www.linaro.org/> Linaro.org │ Open source software for ARM SoCs

Follow Linaro:  <http://www.facebook.com/pages/Linaro> Facebook |
<http://twitter.com/#!/linaroorg> Twitter |
<http://www.linaro.org/linaro-blog/> Blog
Re: [PATCH] clocksource/drivers/imx-gpt: Use only a single name for functions
Posted by Daniel Lezcano 10 months, 4 weeks ago 
On 30/05/2023 17:31, Uwe Kleine-König wrote:
> Helo Daniel,
> 
> On Tue, Mar 28, 2023 at 11:15:14AM +0200, Uwe Kleine-König wrote:
>> When looking at the data structs defining the different behaviours of
>> the GPT blocks in different SoCs it's not helpful that the same
>> functions are used with different names.
>>
>> So drop the cpp defines and use the original names.
>>
>> This commit was generated using:
>>
>> 	perl -i -e 'my %m; while (<>) { if (/^#define (imx[a-zA-Z0-6_]*)\s(imx[a-zA-Z0-6_]*)/) {$m{$1} = $2; } else { foreach my $f (keys %m) {s/$f/$m{$f}/; } print; } }' drivers/clocksource/timer-imx-gpt.c
>>
>> This patch has no effect on the generated code.
>>
>> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
> 
> This patch was generated against v6.3-rc1. On the upside it still
> applies fine to v6.4-rc1 and even current next/master. On the downside I
> didn't get any feedback on it. Is this patch still on your radar?

Well, it is back on the radar now :)

Without feedback from the driver maintainer I'll pick the patch in a few 
days


-- 
<http://www.linaro.org/> Linaro.org │ Open source software for ARM SoCs

Follow Linaro:  <http://www.facebook.com/pages/Linaro> Facebook |
<http://twitter.com/#!/linaroorg> Twitter |
<http://www.linaro.org/linaro-blog/> Blog
[tip: timers/core] clocksource/drivers/imx-gpt: Use only a single name for functions
Posted by tip-bot2 for Uwe Kleine-König 10 months ago 
The following commit has been merged into the timers/core branch of tip:

Commit-ID:     95aded1b1c409fb2e902c6bd455068700ac38878
Gitweb:        https://git.kernel.org/tip/95aded1b1c409fb2e902c6bd455068700ac38878
Author:        Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
AuthorDate:    Tue, 28 Mar 2023 11:15:14 +02:00
Committer:     Daniel Lezcano <daniel.lezcano@linaro.org>
CommitterDate: Mon, 19 Jun 2023 17:31:56 +02:00

clocksource/drivers/imx-gpt: Use only a single name for functions

When looking at the data structs defining the different behaviours of
the GPT blocks in different SoCs it's not helpful that the same
functions are used with different names.

So drop the cpp defines and use the original names.

This commit was generated using:

	perl -i -e 'my %m; while (<>) { if (/^#define (imx[a-zA-Z0-6_]*)\s(imx[a-zA-Z0-6_]*)/) {$m{$1} = $2; } else { foreach my $f (keys %m) {s/$f/$m{$f}/; } print; } }' drivers/clocksource/timer-imx-gpt.c

This patch has no effect on the generated code.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20230328091514.874724-1-u.kleine-koenig@pengutronix.de
---
 drivers/clocksource/timer-imx-gpt.c | 18 ++++++------------
 1 file changed, 6 insertions(+), 12 deletions(-)

diff --git a/drivers/clocksource/timer-imx-gpt.c b/drivers/clocksource/timer-imx-gpt.c
index ca3e4cb..83cefff 100644
--- a/drivers/clocksource/timer-imx-gpt.c
+++ b/drivers/clocksource/timer-imx-gpt.c
@@ -93,13 +93,11 @@ static void imx1_gpt_irq_disable(struct imx_timer *imxtm)
 	tmp = readl_relaxed(imxtm->base + MXC_TCTL);
 	writel_relaxed(tmp & ~MX1_2_TCTL_IRQEN, imxtm->base + MXC_TCTL);
 }
-#define imx21_gpt_irq_disable imx1_gpt_irq_disable
 
 static void imx31_gpt_irq_disable(struct imx_timer *imxtm)
 {
 	writel_relaxed(0, imxtm->base + V2_IR);
 }
-#define imx6dl_gpt_irq_disable imx31_gpt_irq_disable
 
 static void imx1_gpt_irq_enable(struct imx_timer *imxtm)
 {
@@ -108,13 +106,11 @@ static void imx1_gpt_irq_enable(struct imx_timer *imxtm)
 	tmp = readl_relaxed(imxtm->base + MXC_TCTL);
 	writel_relaxed(tmp | MX1_2_TCTL_IRQEN, imxtm->base + MXC_TCTL);
 }
-#define imx21_gpt_irq_enable imx1_gpt_irq_enable
 
 static void imx31_gpt_irq_enable(struct imx_timer *imxtm)
 {
 	writel_relaxed(1<<0, imxtm->base + V2_IR);
 }
-#define imx6dl_gpt_irq_enable imx31_gpt_irq_enable
 
 static void imx1_gpt_irq_acknowledge(struct imx_timer *imxtm)
 {
@@ -131,7 +127,6 @@ static void imx31_gpt_irq_acknowledge(struct imx_timer *imxtm)
 {
 	writel_relaxed(V2_TSTAT_OF1, imxtm->base + V2_TSTAT);
 }
-#define imx6dl_gpt_irq_acknowledge imx31_gpt_irq_acknowledge
 
 static void __iomem *sched_clock_reg;
 
@@ -296,7 +291,6 @@ static void imx1_gpt_setup_tctl(struct imx_timer *imxtm)
 	tctl_val = MX1_2_TCTL_FRR | MX1_2_TCTL_CLK_PCLK1 | MXC_TCTL_TEN;
 	writel_relaxed(tctl_val, imxtm->base + MXC_TCTL);
 }
-#define imx21_gpt_setup_tctl imx1_gpt_setup_tctl
 
 static void imx31_gpt_setup_tctl(struct imx_timer *imxtm)
 {
@@ -343,10 +337,10 @@ static const struct imx_gpt_data imx21_gpt_data = {
 	.reg_tstat = MX1_2_TSTAT,
 	.reg_tcn = MX1_2_TCN,
 	.reg_tcmp = MX1_2_TCMP,
-	.gpt_irq_enable = imx21_gpt_irq_enable,
-	.gpt_irq_disable = imx21_gpt_irq_disable,
+	.gpt_irq_enable = imx1_gpt_irq_enable,
+	.gpt_irq_disable = imx1_gpt_irq_disable,
 	.gpt_irq_acknowledge = imx21_gpt_irq_acknowledge,
-	.gpt_setup_tctl = imx21_gpt_setup_tctl,
+	.gpt_setup_tctl = imx1_gpt_setup_tctl,
 	.set_next_event = mx1_2_set_next_event,
 };
 
@@ -365,9 +359,9 @@ static const struct imx_gpt_data imx6dl_gpt_data = {
 	.reg_tstat = V2_TSTAT,
 	.reg_tcn = V2_TCN,
 	.reg_tcmp = V2_TCMP,
-	.gpt_irq_enable = imx6dl_gpt_irq_enable,
-	.gpt_irq_disable = imx6dl_gpt_irq_disable,
-	.gpt_irq_acknowledge = imx6dl_gpt_irq_acknowledge,
+	.gpt_irq_enable = imx31_gpt_irq_enable,
+	.gpt_irq_disable = imx31_gpt_irq_disable,
+	.gpt_irq_acknowledge = imx31_gpt_irq_acknowledge,
 	.gpt_setup_tctl = imx6dl_gpt_setup_tctl,
 	.set_next_event = v2_set_next_event,
 };

Patchew 2.1-devel-0870f84

© 2016 - 2024 Red Hat, Inc.