Before this patch, the ksz8_fdb_dump() function had several issues, such
as uninitialized variables and incorrect usage of source port as a bit
mask. These problems caused inaccurate reporting of vid information and
port assignment in the bridge fdb.

Fixes: e587be759e6e ("net: dsa: microchip: update fdb add/del/dump in ksz_common")
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Acked-by: Arun Ramadoss <arun.ramadoss@microchip.com>
---
 drivers/net/dsa/microchip/ksz8795.c | 11 +++++------
 1 file changed, 5 insertions(+), 6 deletions(-)

diff --git a/drivers/net/dsa/microchip/ksz8795.c b/drivers/net/dsa/microchip/ksz8795.c
index 003b0ac2854c..3fffd5da8d3b 100644
--- a/drivers/net/dsa/microchip/ksz8795.c
+++ b/drivers/net/dsa/microchip/ksz8795.c
@@ -958,15 +958,14 @@ int ksz8_fdb_dump(struct ksz_device *dev, int port,
 	u16 entries = 0;
 	u8 timestamp = 0;
 	u8 fid;
-	u8 member;
-	struct alu_struct alu;
+	u8 src_port;
+	u8 mac[ETH_ALEN];
 
 	do {
-		alu.is_static = false;
-		ret = ksz8_r_dyn_mac_table(dev, i, alu.mac, &fid, &member,
+		ret = ksz8_r_dyn_mac_table(dev, i, mac, &fid, &src_port,
 					   &timestamp, &entries);
-		if (!ret && (member & BIT(port))) {
-			ret = cb(alu.mac, alu.fid, alu.is_static, data);
+		if (!ret && port == src_port) {
+			ret = cb(mac, fid, false, data);
 			if (ret)
 				break;
 		}
-- 
2.30.2

On 3/24/23 01:06, Oleksij Rempel wrote:
> Before this patch, the ksz8_fdb_dump() function had several issues, such
> as uninitialized variables and incorrect usage of source port as a bit
> mask. These problems caused inaccurate reporting of vid information and
> port assignment in the bridge fdb.
> 
> Fixes: e587be759e6e ("net: dsa: microchip: update fdb add/del/dump in ksz_common")
> Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
> Acked-by: Arun Ramadoss <arun.ramadoss@microchip.com>

Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
-- 
Florian