Some LEDs controllers are used with external pull-up for the interrupt
line and the I2C lines, so we might need to enable a regulator to bring
the lines into usable state. Otherwise, this might cause spurious
interrupts and reading from I2C will fail.

Implement support for "vddio-supply" that is enabled by the aw2013 driver
so that the regulator gets enabled when needed.

Signed-off-by: Lin, Meng-Bo <linmengbo0689@protonmail.com>
---
 drivers/leds/leds-aw2013.c | 26 +++++++++++++++++---------
 1 file changed, 17 insertions(+), 9 deletions(-)

diff --git a/drivers/leds/leds-aw2013.c b/drivers/leds/leds-aw2013.c
index 0b52fc9097c6..95f2f9bf95ee 100644
--- a/drivers/leds/leds-aw2013.c
+++ b/drivers/leds/leds-aw2013.c
@@ -62,7 +62,7 @@ struct aw2013_led {
 
 struct aw2013 {
 	struct mutex mutex; /* held when writing to registers */
-	struct regulator *vcc_regulator;
+	struct regulator_bulk_data regulators[2];
 	struct i2c_client *client;
 	struct aw2013_led leds[AW2013_MAX_LEDS];
 	struct regmap *regmap;
@@ -106,7 +106,8 @@ static void aw2013_chip_disable(struct aw2013 *chip)
 
 	regmap_write(chip->regmap, AW2013_GCR, 0);
 
-	ret = regulator_disable(chip->vcc_regulator);
+	ret = regulator_bulk_disable(ARRAY_SIZE(chip->regulators),
+				     chip->regulators);
 	if (ret) {
 		dev_err(&chip->client->dev,
 			"Failed to disable regulator: %d\n", ret);
@@ -123,7 +124,8 @@ static int aw2013_chip_enable(struct aw2013 *chip)
 	if (chip->enabled)
 		return 0;
 
-	ret = regulator_enable(chip->vcc_regulator);
+	ret = regulator_bulk_enable(ARRAY_SIZE(chip->regulators),
+				    chip->regulators);
 	if (ret) {
 		dev_err(&chip->client->dev,
 			"Failed to enable regulator: %d\n", ret);
@@ -348,16 +350,20 @@ static int aw2013_probe(struct i2c_client *client)
 		goto error;
 	}
 
-	chip->vcc_regulator = devm_regulator_get(&client->dev, "vcc");
-	ret = PTR_ERR_OR_ZERO(chip->vcc_regulator);
-	if (ret) {
+	chip->regulators[0].supply = "vcc";
+	chip->regulators[1].supply = "vddio";
+	ret = devm_regulator_bulk_get(&client->dev,
+				      ARRAY_SIZE(chip->regulators),
+				      chip->regulators);
+	if (ret < 0) {
 		if (ret != -EPROBE_DEFER)
 			dev_err(&client->dev,
 				"Failed to request regulator: %d\n", ret);
 		goto error;
 	}
 
-	ret = regulator_enable(chip->vcc_regulator);
+	ret = regulator_bulk_enable(ARRAY_SIZE(chip->regulators),
+				    chip->regulators);
 	if (ret) {
 		dev_err(&client->dev,
 			"Failed to enable regulator: %d\n", ret);
@@ -382,7 +388,8 @@ static int aw2013_probe(struct i2c_client *client)
 	if (ret < 0)
 		goto error_reg;
 
-	ret = regulator_disable(chip->vcc_regulator);
+	ret = regulator_bulk_disable(ARRAY_SIZE(chip->regulators),
+				     chip->regulators);
 	if (ret) {
 		dev_err(&client->dev,
 			"Failed to disable regulator: %d\n", ret);
@@ -394,7 +401,8 @@ static int aw2013_probe(struct i2c_client *client)
 	return 0;
 
 error_reg:
-	regulator_disable(chip->vcc_regulator);
+	regulator_bulk_disable(ARRAY_SIZE(chip->regulators),
+			       chip->regulators);
 
 error:
 	mutex_destroy(&chip->mutex);
-- 
2.30.2

Hi!

> Some LEDs controllers are used with external pull-up for the interrupt
> line and the I2C lines, so we might need to enable a regulator to bring
> the lines into usable state. Otherwise, this might cause spurious
> interrupts and reading from I2C will fail.
> 
> Implement support for "vddio-supply" that is enabled by the aw2013 driver
> so that the regulator gets enabled when needed.
> 
> Signed-off-by: Lin, Meng-Bo <linmengbo0689@protonmail.com>

> @@ -348,16 +350,20 @@ static int aw2013_probe(struct i2c_client *client)
>  		goto error;
>  	}
>  
> -	chip->vcc_regulator = devm_regulator_get(&client->dev, "vcc");
> -	ret = PTR_ERR_OR_ZERO(chip->vcc_regulator);
> -	if (ret) {
> +	chip->regulators[0].supply = "vcc";
> +	chip->regulators[1].supply = "vddio";
> +	ret = devm_regulator_bulk_get(&client->dev,
> +				      ARRAY_SIZE(chip->regulators),
> +				      chip->regulators);
> +	if (ret < 0) {
>  		if (ret != -EPROBE_DEFER)
>  			dev_err(&client->dev,
>  				"Failed to request regulator: %d\n", ret);
>  		goto error;

Won't this cause failures when optional vddio is unavailable?

BR,
							Pavel
							
-- 
People of Russia, stop Putin before his war on Ukraine escalates.