.../bindings/regulator/anatop-regulator.yaml | 22 +++++++++---------- .../bindings/regulator/dlg,da9121.yaml | 2 +- .../bindings/regulator/fixed-regulator.yaml | 2 +- .../regulator/google,cros-ec-regulator.yaml | 2 +- .../bindings/regulator/gpio-regulator.yaml | 2 +- .../regulator/max77650-regulator.yaml | 2 +- .../bindings/regulator/max8660.yaml | 2 +- .../bindings/regulator/max8893.yaml | 2 +- .../regulator/mediatek,mt6331-regulator.yaml | 12 +++++----- .../regulator/mediatek,mt6332-regulator.yaml | 4 ++-- .../bindings/regulator/mps,mp5416.yaml | 4 ++-- .../bindings/regulator/mps,mp886x.yaml | 2 +- .../bindings/regulator/mps,mpq7920.yaml | 6 ++--- .../bindings/regulator/mt6315-regulator.yaml | 2 +- .../bindings/regulator/mt6359-regulator.yaml | 16 +++++++------- .../bindings/regulator/mt6360-regulator.yaml | 4 ++-- .../regulator/nxp,pca9450-regulator.yaml | 4 ++-- .../regulator/nxp,pf8x00-regulator.yaml | 4 ++-- .../bindings/regulator/pfuze100.yaml | 8 +++---- .../regulator/qcom,rpmh-regulator.yaml | 8 +++---- ...ypi,7inch-touchscreen-panel-regulator.yaml | 2 +- .../bindings/regulator/regulator.yaml | 22 +++++++++---------- .../regulator/richtek,rt6245-regulator.yaml | 8 +++---- .../regulator/richtek,rtmv20-regulator.yaml | 2 +- .../regulator/rohm,bd71815-regulator.yaml | 8 +++---- .../regulator/rohm,bd71828-regulator.yaml | 8 +++---- .../regulator/rohm,bd71837-regulator.yaml | 6 ++--- .../regulator/rohm,bd71847-regulator.yaml | 6 ++--- .../regulator/rohm,bd9576-regulator.yaml | 2 +- .../socionext,uniphier-regulator.yaml | 2 +- .../bindings/regulator/st,stm32-booster.yaml | 4 ++-- .../bindings/regulator/st,stm32-vrefbuf.yaml | 2 +- .../regulator/st,stm32mp1-pwr-reg.yaml | 2 +- .../bindings/regulator/ti,tps62360.yaml | 2 +- .../regulator/vqmmc-ipq4019-regulator.yaml | 2 +- .../bindings/regulator/wlf,arizona.yaml | 6 ++--- 36 files changed, 97 insertions(+), 97 deletions(-)
Cleanup bindings dropping unneeded quotes. Once all these are fixed,
checking for this can be enabled in yamllint.
Signed-off-by: Rob Herring <robh@kernel.org>
---
.../bindings/regulator/anatop-regulator.yaml | 22 +++++++++----------
.../bindings/regulator/dlg,da9121.yaml | 2 +-
.../bindings/regulator/fixed-regulator.yaml | 2 +-
.../regulator/google,cros-ec-regulator.yaml | 2 +-
.../bindings/regulator/gpio-regulator.yaml | 2 +-
.../regulator/max77650-regulator.yaml | 2 +-
.../bindings/regulator/max8660.yaml | 2 +-
.../bindings/regulator/max8893.yaml | 2 +-
.../regulator/mediatek,mt6331-regulator.yaml | 12 +++++-----
.../regulator/mediatek,mt6332-regulator.yaml | 4 ++--
.../bindings/regulator/mps,mp5416.yaml | 4 ++--
.../bindings/regulator/mps,mp886x.yaml | 2 +-
.../bindings/regulator/mps,mpq7920.yaml | 6 ++---
.../bindings/regulator/mt6315-regulator.yaml | 2 +-
.../bindings/regulator/mt6359-regulator.yaml | 16 +++++++-------
.../bindings/regulator/mt6360-regulator.yaml | 4 ++--
.../regulator/nxp,pca9450-regulator.yaml | 4 ++--
.../regulator/nxp,pf8x00-regulator.yaml | 4 ++--
.../bindings/regulator/pfuze100.yaml | 8 +++----
.../regulator/qcom,rpmh-regulator.yaml | 8 +++----
...ypi,7inch-touchscreen-panel-regulator.yaml | 2 +-
.../bindings/regulator/regulator.yaml | 22 +++++++++----------
.../regulator/richtek,rt6245-regulator.yaml | 8 +++----
.../regulator/richtek,rtmv20-regulator.yaml | 2 +-
.../regulator/rohm,bd71815-regulator.yaml | 8 +++----
.../regulator/rohm,bd71828-regulator.yaml | 8 +++----
.../regulator/rohm,bd71837-regulator.yaml | 6 ++---
.../regulator/rohm,bd71847-regulator.yaml | 6 ++---
.../regulator/rohm,bd9576-regulator.yaml | 2 +-
.../socionext,uniphier-regulator.yaml | 2 +-
.../bindings/regulator/st,stm32-booster.yaml | 4 ++--
.../bindings/regulator/st,stm32-vrefbuf.yaml | 2 +-
.../regulator/st,stm32mp1-pwr-reg.yaml | 2 +-
.../bindings/regulator/ti,tps62360.yaml | 2 +-
.../regulator/vqmmc-ipq4019-regulator.yaml | 2 +-
.../bindings/regulator/wlf,arizona.yaml | 6 ++---
36 files changed, 97 insertions(+), 97 deletions(-)
diff --git a/Documentation/devicetree/bindings/regulator/anatop-regulator.yaml b/Documentation/devicetree/bindings/regulator/anatop-regulator.yaml
index 0a66338c7e5a..17250378542a 100644
--- a/Documentation/devicetree/bindings/regulator/anatop-regulator.yaml
+++ b/Documentation/devicetree/bindings/regulator/anatop-regulator.yaml
@@ -10,7 +10,7 @@ maintainers:
- Ying-Chun Liu (PaulLiu) <paul.liu@linaro.org>
allOf:
- - $ref: "regulator.yaml#"
+ - $ref: regulator.yaml#
properties:
compatible:
@@ -19,43 +19,43 @@ properties:
regulator-name: true
anatop-reg-offset:
- $ref: '/schemas/types.yaml#/definitions/uint32'
+ $ref: /schemas/types.yaml#/definitions/uint32
description: u32 value representing the anatop MFD register offset.
anatop-vol-bit-shift:
- $ref: '/schemas/types.yaml#/definitions/uint32'
+ $ref: /schemas/types.yaml#/definitions/uint32
description: u32 value representing the bit shift for the register.
anatop-vol-bit-width:
- $ref: '/schemas/types.yaml#/definitions/uint32'
+ $ref: /schemas/types.yaml#/definitions/uint32
description: u32 value representing the number of bits used in the register.
anatop-min-bit-val:
- $ref: '/schemas/types.yaml#/definitions/uint32'
+ $ref: /schemas/types.yaml#/definitions/uint32
description: u32 value representing the minimum value of this register.
anatop-min-voltage:
- $ref: '/schemas/types.yaml#/definitions/uint32'
+ $ref: /schemas/types.yaml#/definitions/uint32
description: u32 value representing the minimum voltage of this regulator.
anatop-max-voltage:
- $ref: '/schemas/types.yaml#/definitions/uint32'
+ $ref: /schemas/types.yaml#/definitions/uint32
description: u32 value representing the maximum voltage of this regulator.
anatop-delay-reg-offset:
- $ref: '/schemas/types.yaml#/definitions/uint32'
+ $ref: /schemas/types.yaml#/definitions/uint32
description: u32 value representing the anatop MFD step time register offset.
anatop-delay-bit-shift:
- $ref: '/schemas/types.yaml#/definitions/uint32'
+ $ref: /schemas/types.yaml#/definitions/uint32
description: u32 value representing the bit shift for the step time register.
anatop-delay-bit-width:
- $ref: '/schemas/types.yaml#/definitions/uint32'
+ $ref: /schemas/types.yaml#/definitions/uint32
description: u32 value representing the number of bits used in the step time register.
anatop-enable-bit:
- $ref: '/schemas/types.yaml#/definitions/uint32'
+ $ref: /schemas/types.yaml#/definitions/uint32
description: u32 value representing regulator enable bit offset.
vin-supply:
diff --git a/Documentation/devicetree/bindings/regulator/dlg,da9121.yaml b/Documentation/devicetree/bindings/regulator/dlg,da9121.yaml
index 63e1161a87de..dc626517c2ad 100644
--- a/Documentation/devicetree/bindings/regulator/dlg,da9121.yaml
+++ b/Documentation/devicetree/bindings/regulator/dlg,da9121.yaml
@@ -109,7 +109,7 @@ properties:
description: Specify a valid GPIO for platform control of the regulator
dlg,ripple-cancel:
- $ref: "/schemas/types.yaml#/definitions/uint32"
+ $ref: /schemas/types.yaml#/definitions/uint32
enum: [ 0, 1, 2, 3 ]
description: |
Defined in include/dt-bindings/regulator/dlg,da9121-regulator.h
diff --git a/Documentation/devicetree/bindings/regulator/fixed-regulator.yaml b/Documentation/devicetree/bindings/regulator/fixed-regulator.yaml
index 48af7cba4652..ac0281b1cceb 100644
--- a/Documentation/devicetree/bindings/regulator/fixed-regulator.yaml
+++ b/Documentation/devicetree/bindings/regulator/fixed-regulator.yaml
@@ -17,7 +17,7 @@ description:
to be the same.
allOf:
- - $ref: "regulator.yaml#"
+ - $ref: regulator.yaml#
- if:
properties:
compatible:
diff --git a/Documentation/devicetree/bindings/regulator/google,cros-ec-regulator.yaml b/Documentation/devicetree/bindings/regulator/google,cros-ec-regulator.yaml
index 0921f012c901..e0ff5012b763 100644
--- a/Documentation/devicetree/bindings/regulator/google,cros-ec-regulator.yaml
+++ b/Documentation/devicetree/bindings/regulator/google,cros-ec-regulator.yaml
@@ -14,7 +14,7 @@ description:
regulator.yaml, can also be used.
allOf:
- - $ref: "regulator.yaml#"
+ - $ref: regulator.yaml#
properties:
compatible:
diff --git a/Documentation/devicetree/bindings/regulator/gpio-regulator.yaml b/Documentation/devicetree/bindings/regulator/gpio-regulator.yaml
index 6c3371d706bb..f4c1f36e52e9 100644
--- a/Documentation/devicetree/bindings/regulator/gpio-regulator.yaml
+++ b/Documentation/devicetree/bindings/regulator/gpio-regulator.yaml
@@ -15,7 +15,7 @@ description:
regulator.txt, can also be used.
allOf:
- - $ref: "regulator.yaml#"
+ - $ref: regulator.yaml#
properties:
compatible:
diff --git a/Documentation/devicetree/bindings/regulator/max77650-regulator.yaml b/Documentation/devicetree/bindings/regulator/max77650-regulator.yaml
index 01b9775a92d1..27d5e9c2bb93 100644
--- a/Documentation/devicetree/bindings/regulator/max77650-regulator.yaml
+++ b/Documentation/devicetree/bindings/regulator/max77650-regulator.yaml
@@ -25,7 +25,7 @@ properties:
patternProperties:
"^regulator-(ldo|sbb[0-2])$":
- $ref: "regulator.yaml#"
+ $ref: regulator.yaml#
unevaluatedProperties: false
required:
diff --git a/Documentation/devicetree/bindings/regulator/max8660.yaml b/Documentation/devicetree/bindings/regulator/max8660.yaml
index 35792a927b03..f05f4644c8ee 100644
--- a/Documentation/devicetree/bindings/regulator/max8660.yaml
+++ b/Documentation/devicetree/bindings/regulator/max8660.yaml
@@ -25,7 +25,7 @@ properties:
patternProperties:
"^regulator-.+$":
- $ref: "regulator.yaml#"
+ $ref: regulator.yaml#
unevaluatedProperties: false
additionalProperties: false
diff --git a/Documentation/devicetree/bindings/regulator/max8893.yaml b/Documentation/devicetree/bindings/regulator/max8893.yaml
index 2b5e977bf409..e40ee798e198 100644
--- a/Documentation/devicetree/bindings/regulator/max8893.yaml
+++ b/Documentation/devicetree/bindings/regulator/max8893.yaml
@@ -25,7 +25,7 @@ properties:
patternProperties:
"^(ldo[1-5]|buck)$":
- $ref: "regulator.yaml#"
+ $ref: regulator.yaml#
additionalProperties: false
diff --git a/Documentation/devicetree/bindings/regulator/mediatek,mt6331-regulator.yaml b/Documentation/devicetree/bindings/regulator/mediatek,mt6331-regulator.yaml
index 771cc134393c..79e5198e1c73 100644
--- a/Documentation/devicetree/bindings/regulator/mediatek,mt6331-regulator.yaml
+++ b/Documentation/devicetree/bindings/regulator/mediatek,mt6331-regulator.yaml
@@ -18,7 +18,7 @@ description: |
patternProperties:
"^buck-v(core2|io18|dvfs11|dvfs12|dvfs13|dvfs14)$":
type: object
- $ref: "regulator.yaml#"
+ $ref: regulator.yaml#
properties:
regulator-name:
@@ -28,7 +28,7 @@ patternProperties:
"^ldo-v(avdd32aud|auxa32)$":
type: object
- $ref: "regulator.yaml#"
+ $ref: regulator.yaml#
properties:
regulator-name:
@@ -38,7 +38,7 @@ patternProperties:
"^ldo-v(dig18|emc33|ibr|mc|mch|mipi|rtc|sram|usb10)$":
type: object
- $ref: "regulator.yaml#"
+ $ref: regulator.yaml#
properties:
regulator-name:
@@ -48,7 +48,7 @@ patternProperties:
"^ldo-vcam(a|af|d|io)$":
type: object
- $ref: "regulator.yaml#"
+ $ref: regulator.yaml#
properties:
regulator-name:
@@ -58,7 +58,7 @@ patternProperties:
"^ldo-vtcxo[12]$":
type: object
- $ref: "regulator.yaml#"
+ $ref: regulator.yaml#
properties:
regulator-name:
@@ -71,7 +71,7 @@ patternProperties:
"^ldo-vgp[1234]$":
type: object
- $ref: "regulator.yaml#"
+ $ref: regulator.yaml#
properties:
regulator-name:
diff --git a/Documentation/devicetree/bindings/regulator/mediatek,mt6332-regulator.yaml b/Documentation/devicetree/bindings/regulator/mediatek,mt6332-regulator.yaml
index 3218f43e6957..2eb512c29a0d 100644
--- a/Documentation/devicetree/bindings/regulator/mediatek,mt6332-regulator.yaml
+++ b/Documentation/devicetree/bindings/regulator/mediatek,mt6332-regulator.yaml
@@ -18,7 +18,7 @@ description: |
patternProperties:
"^buck-v(dram|dvfs2|pa|rf18a|rf18b|sbst)$":
type: object
- $ref: "regulator.yaml#"
+ $ref: regulator.yaml#
properties:
regulator-name:
@@ -28,7 +28,7 @@ patternProperties:
"^ldo-v(bif28|dig18|sram|usb33)$":
type: object
- $ref: "regulator.yaml#"
+ $ref: regulator.yaml#
properties:
regulator-name:
diff --git a/Documentation/devicetree/bindings/regulator/mps,mp5416.yaml b/Documentation/devicetree/bindings/regulator/mps,mp5416.yaml
index 7023c597c3ed..2e720d152890 100644
--- a/Documentation/devicetree/bindings/regulator/mps,mp5416.yaml
+++ b/Documentation/devicetree/bindings/regulator/mps,mp5416.yaml
@@ -28,11 +28,11 @@ properties:
patternProperties:
"^buck[1-4]$":
- $ref: "regulator.yaml#"
+ $ref: regulator.yaml#
type: object
"^ldo[1-4]$":
- $ref: "regulator.yaml#"
+ $ref: regulator.yaml#
type: object
additionalProperties: false
diff --git a/Documentation/devicetree/bindings/regulator/mps,mp886x.yaml b/Documentation/devicetree/bindings/regulator/mps,mp886x.yaml
index 9245b7199439..374a4f6b1e23 100644
--- a/Documentation/devicetree/bindings/regulator/mps,mp886x.yaml
+++ b/Documentation/devicetree/bindings/regulator/mps,mp886x.yaml
@@ -28,7 +28,7 @@ properties:
mps,fb-voltage-divider:
description: An array of two integers containing the resistor
values R1 and R2 of the feedback voltage divider in kilo ohms.
- $ref: "/schemas/types.yaml#/definitions/uint32-array"
+ $ref: /schemas/types.yaml#/definitions/uint32-array
maxItems: 2
mps,switch-frequency-hz:
diff --git a/Documentation/devicetree/bindings/regulator/mps,mpq7920.yaml b/Documentation/devicetree/bindings/regulator/mps,mpq7920.yaml
index c2e8c54e5311..f3fcfc8be72f 100644
--- a/Documentation/devicetree/bindings/regulator/mps,mpq7920.yaml
+++ b/Documentation/devicetree/bindings/regulator/mps,mpq7920.yaml
@@ -29,7 +29,7 @@ properties:
properties:
mps,switch-freq:
- $ref: "/schemas/types.yaml#/definitions/uint8"
+ $ref: /schemas/types.yaml#/definitions/uint8
enum: [0, 1, 2, 3]
default: 2
description: |
@@ -51,14 +51,14 @@ properties:
properties:
mps,buck-softstart:
- $ref: "/schemas/types.yaml#/definitions/uint8"
+ $ref: /schemas/types.yaml#/definitions/uint8
enum: [0, 1, 2, 3]
description: |
defines the soft start time of this buck, must be one of the following
corresponding values 150us, 300us, 610us, 920us
mps,buck-phase-delay:
- $ref: "/schemas/types.yaml#/definitions/uint8"
+ $ref: /schemas/types.yaml#/definitions/uint8
enum: [0, 1, 2, 3]
description: |
defines the phase delay of this buck, must be one of the following
diff --git a/Documentation/devicetree/bindings/regulator/mt6315-regulator.yaml b/Documentation/devicetree/bindings/regulator/mt6315-regulator.yaml
index 364b58730be2..6317daf76d1f 100644
--- a/Documentation/devicetree/bindings/regulator/mt6315-regulator.yaml
+++ b/Documentation/devicetree/bindings/regulator/mt6315-regulator.yaml
@@ -28,7 +28,7 @@ properties:
patternProperties:
"^vbuck[1-4]$":
type: object
- $ref: "regulator.yaml#"
+ $ref: regulator.yaml#
unevaluatedProperties: false
properties:
diff --git a/Documentation/devicetree/bindings/regulator/mt6359-regulator.yaml b/Documentation/devicetree/bindings/regulator/mt6359-regulator.yaml
index 8cc413eb482d..d6b3b5a5c0b3 100644
--- a/Documentation/devicetree/bindings/regulator/mt6359-regulator.yaml
+++ b/Documentation/devicetree/bindings/regulator/mt6359-regulator.yaml
@@ -17,7 +17,7 @@ description: |
patternProperties:
"^buck_v(s1|gpu11|modem|pu|core|s2|pa|proc2|proc1|core_sshub)$":
type: object
- $ref: "regulator.yaml#"
+ $ref: regulator.yaml#
properties:
regulator-name:
@@ -27,7 +27,7 @@ patternProperties:
"^ldo_v(ibr|rf12|usb|camio|efuse|xo22)$":
type: object
- $ref: "regulator.yaml#"
+ $ref: regulator.yaml#
properties:
regulator-name:
@@ -37,7 +37,7 @@ patternProperties:
"^ldo_v(rfck|emc|a12|a09|ufs|bbck)$":
type: object
- $ref: "regulator.yaml#"
+ $ref: regulator.yaml#
properties:
regulator-name:
@@ -47,7 +47,7 @@ patternProperties:
"^ldo_vcn(18|13|33_1_bt|13_1_wifi|33_2_bt|33_2_wifi)$":
type: object
- $ref: "regulator.yaml#"
+ $ref: regulator.yaml#
properties:
regulator-name:
@@ -57,7 +57,7 @@ patternProperties:
"^ldo_vsram_(proc2|others|md|proc1|others_sshub)$":
type: object
- $ref: "regulator.yaml#"
+ $ref: regulator.yaml#
properties:
regulator-name:
@@ -67,7 +67,7 @@ patternProperties:
"^ldo_v(fe|bif|io)28$":
type: object
- $ref: "regulator.yaml#"
+ $ref: regulator.yaml#
properties:
regulator-name:
@@ -77,7 +77,7 @@ patternProperties:
"^ldo_v(aud|io|aux|rf|m)18$":
type: object
- $ref: "regulator.yaml#"
+ $ref: regulator.yaml#
properties:
regulator-name:
@@ -87,7 +87,7 @@ patternProperties:
"^ldo_vsim[12]$":
type: object
- $ref: "regulator.yaml#"
+ $ref: regulator.yaml#
properties:
regulator-name:
diff --git a/Documentation/devicetree/bindings/regulator/mt6360-regulator.yaml b/Documentation/devicetree/bindings/regulator/mt6360-regulator.yaml
index 8a0931dc2f30..9c879bc3c360 100644
--- a/Documentation/devicetree/bindings/regulator/mt6360-regulator.yaml
+++ b/Documentation/devicetree/bindings/regulator/mt6360-regulator.yaml
@@ -26,11 +26,11 @@ properties:
patternProperties:
"^buck[12]$":
- $ref: "regulator.yaml#"
+ $ref: regulator.yaml#
unevaluatedProperties: false
"^ldo[123567]$":
- $ref: "regulator.yaml#"
+ $ref: regulator.yaml#
unevaluatedProperties: false
required:
diff --git a/Documentation/devicetree/bindings/regulator/nxp,pca9450-regulator.yaml b/Documentation/devicetree/bindings/regulator/nxp,pca9450-regulator.yaml
index 6b53dc87694e..3d469b8e9774 100644
--- a/Documentation/devicetree/bindings/regulator/nxp,pca9450-regulator.yaml
+++ b/Documentation/devicetree/bindings/regulator/nxp,pca9450-regulator.yaml
@@ -57,7 +57,7 @@ properties:
properties:
nxp,dvs-run-voltage:
- $ref: "/schemas/types.yaml#/definitions/uint32"
+ $ref: /schemas/types.yaml#/definitions/uint32
minimum: 600000
maximum: 2187500
description:
@@ -65,7 +65,7 @@ properties:
dvs(dynamic voltage scaling) property.
nxp,dvs-standby-voltage:
- $ref: "/schemas/types.yaml#/definitions/uint32"
+ $ref: /schemas/types.yaml#/definitions/uint32
minimum: 600000
maximum: 2187500
description:
diff --git a/Documentation/devicetree/bindings/regulator/nxp,pf8x00-regulator.yaml b/Documentation/devicetree/bindings/regulator/nxp,pf8x00-regulator.yaml
index aabf50f5b39e..8c0f37d8d082 100644
--- a/Documentation/devicetree/bindings/regulator/nxp,pf8x00-regulator.yaml
+++ b/Documentation/devicetree/bindings/regulator/nxp,pf8x00-regulator.yaml
@@ -59,7 +59,7 @@ properties:
should be "buck1", ..., "buck7"
nxp,ilim-ma:
- $ref: "/schemas/types.yaml#/definitions/uint32"
+ $ref: /schemas/types.yaml#/definitions/uint32
minimum: 2100
maximum: 4500
deprecated: true
@@ -75,7 +75,7 @@ properties:
4500
nxp,phase-shift:
- $ref: "/schemas/types.yaml#/definitions/uint32"
+ $ref: /schemas/types.yaml#/definitions/uint32
default: 0
enum: [ 0, 45, 90, 135, 180, 225, 270, 315 ]
description:
diff --git a/Documentation/devicetree/bindings/regulator/pfuze100.yaml b/Documentation/devicetree/bindings/regulator/pfuze100.yaml
index a26bbd68b729..67a30b23b92c 100644
--- a/Documentation/devicetree/bindings/regulator/pfuze100.yaml
+++ b/Documentation/devicetree/bindings/regulator/pfuze100.yaml
@@ -63,19 +63,19 @@ properties:
patternProperties:
"^sw([1-4]|[1-4][a-c]|[1-4][a-c][a-c])$":
- $ref: "regulator.yaml#"
+ $ref: regulator.yaml#
type: object
"^vgen[1-6]$":
- $ref: "regulator.yaml#"
+ $ref: regulator.yaml#
type: object
"^vldo[1-4]$":
- $ref: "regulator.yaml#"
+ $ref: regulator.yaml#
type: object
"^(vsnvs|vref|vrefddr|swbst|coin|v33|vccsd)$":
- $ref: "regulator.yaml#"
+ $ref: regulator.yaml#
type: object
additionalProperties: false
diff --git a/Documentation/devicetree/bindings/regulator/qcom,rpmh-regulator.yaml b/Documentation/devicetree/bindings/regulator/qcom,rpmh-regulator.yaml
index 297a75069f60..a765837dc069 100644
--- a/Documentation/devicetree/bindings/regulator/qcom,rpmh-regulator.yaml
+++ b/Documentation/devicetree/bindings/regulator/qcom,rpmh-regulator.yaml
@@ -105,18 +105,18 @@ properties:
bob:
type: object
- $ref: "regulator.yaml#"
+ $ref: regulator.yaml#
description: BOB regulator node.
dependencies:
- regulator-allow-set-load: ["regulator-allowed-modes"]
+ regulator-allow-set-load: [ regulator-allowed-modes ]
patternProperties:
"^(smps|ldo|lvs|bob)[0-9]+$":
type: object
- $ref: "regulator.yaml#"
+ $ref: regulator.yaml#
description: smps/ldo regulator nodes(s).
dependencies:
- regulator-allow-set-load: ["regulator-allowed-modes"]
+ regulator-allow-set-load: [ regulator-allowed-modes ]
required:
- compatible
diff --git a/Documentation/devicetree/bindings/regulator/raspberrypi,7inch-touchscreen-panel-regulator.yaml b/Documentation/devicetree/bindings/regulator/raspberrypi,7inch-touchscreen-panel-regulator.yaml
index 0ae25d119b6f..41678400e63f 100644
--- a/Documentation/devicetree/bindings/regulator/raspberrypi,7inch-touchscreen-panel-regulator.yaml
+++ b/Documentation/devicetree/bindings/regulator/raspberrypi,7inch-touchscreen-panel-regulator.yaml
@@ -15,7 +15,7 @@ description: |
and control the backlight.
allOf:
- - $ref: "regulator.yaml#"
+ - $ref: regulator.yaml#
properties:
compatible:
diff --git a/Documentation/devicetree/bindings/regulator/regulator.yaml b/Documentation/devicetree/bindings/regulator/regulator.yaml
index 53b81d8a2d41..e158c2d3d3f9 100644
--- a/Documentation/devicetree/bindings/regulator/regulator.yaml
+++ b/Documentation/devicetree/bindings/regulator/regulator.yaml
@@ -13,7 +13,7 @@ maintainers:
properties:
regulator-name:
description: A string used as a descriptive name for regulator outputs
- $ref: "/schemas/types.yaml#/definitions/string"
+ $ref: /schemas/types.yaml#/definitions/string
regulator-min-microvolt:
description: smallest voltage consumers may set
@@ -23,7 +23,7 @@ properties:
regulator-microvolt-offset:
description: Offset applied to voltages to compensate for voltage drops
- $ref: "/schemas/types.yaml#/definitions/uint32"
+ $ref: /schemas/types.yaml#/definitions/uint32
regulator-min-microamp:
description: smallest current consumers may set
@@ -59,7 +59,7 @@ properties:
description: ramp delay for regulator(in uV/us) For hardware which supports
disabling ramp rate, it should be explicitly initialised to zero (regulator-ramp-delay
= <0>) for disabling ramp delay.
- $ref: "/schemas/types.yaml#/definitions/uint32"
+ $ref: /schemas/types.yaml#/definitions/uint32
regulator-enable-ramp-delay:
description: The time taken, in microseconds, for the supply rail to
@@ -68,7 +68,7 @@ properties:
required due to the combination of internal ramping of the regulator
itself, and board design issues such as trace capacitance and load
on the supply.
- $ref: "/schemas/types.yaml#/definitions/uint32"
+ $ref: /schemas/types.yaml#/definitions/uint32
regulator-settling-time-us:
description: Settling time, in microseconds, for voltage change if regulator
@@ -95,7 +95,7 @@ properties:
description: initial operating mode. The set of possible operating modes
depends on the capabilities of every hardware so each device binding
documentation explains which values the regulator supports.
- $ref: "/schemas/types.yaml#/definitions/uint32"
+ $ref: /schemas/types.yaml#/definitions/uint32
regulator-allowed-modes:
description: list of operating modes that software is allowed to configure
@@ -103,12 +103,12 @@ properties:
The set of possible operating modes depends on the capabilities of
every hardware so each device binding document explains which values
the regulator supports.
- $ref: "/schemas/types.yaml#/definitions/uint32-array"
+ $ref: /schemas/types.yaml#/definitions/uint32-array
regulator-system-load:
description: Load in uA present on regulator that is not captured by
any consumer request.
- $ref: "/schemas/types.yaml#/definitions/uint32"
+ $ref: /schemas/types.yaml#/definitions/uint32
regulator-pull-down:
description: Enable pull down resistor when the regulator is disabled.
@@ -206,14 +206,14 @@ properties:
0: Disable active discharge.
1: Enable active discharge.
Absence of this property will leave configuration to default.
- $ref: "/schemas/types.yaml#/definitions/uint32"
+ $ref: /schemas/types.yaml#/definitions/uint32
enum: [0, 1]
regulator-coupled-with:
description: Regulators with which the regulator is coupled. The linkage
is 2-way - all coupled regulators should be linked with each other.
A regulator should not be coupled with its supplier.
- $ref: "/schemas/types.yaml#/definitions/phandle-array"
+ $ref: /schemas/types.yaml#/definitions/phandle-array
items:
maxItems: 1
@@ -221,7 +221,7 @@ properties:
description: Array of maximum spread between voltages of coupled regulators
in microvolts, each value in the array relates to the corresponding
couple specified by the regulator-coupled-with property.
- $ref: "/schemas/types.yaml#/definitions/uint32-array"
+ $ref: /schemas/types.yaml#/definitions/uint32-array
regulator-max-step-microvolt:
description: Maximum difference between current and target voltages
@@ -269,7 +269,7 @@ patternProperties:
of possible operating modes depends on the capabilities of every
hardware so the valid modes are documented on each regulator device
tree binding document.
- $ref: "/schemas/types.yaml#/definitions/uint32"
+ $ref: /schemas/types.yaml#/definitions/uint32
additionalProperties: false
diff --git a/Documentation/devicetree/bindings/regulator/richtek,rt6245-regulator.yaml b/Documentation/devicetree/bindings/regulator/richtek,rt6245-regulator.yaml
index e983d0e70c9b..b73762e151bb 100644
--- a/Documentation/devicetree/bindings/regulator/richtek,rt6245-regulator.yaml
+++ b/Documentation/devicetree/bindings/regulator/richtek,rt6245-regulator.yaml
@@ -32,7 +32,7 @@ properties:
maxItems: 1
richtek,oc-level-select:
- $ref: "/schemas/types.yaml#/definitions/uint8"
+ $ref: /schemas/types.yaml#/definitions/uint8
enum: [0, 1, 2, 3]
description: |
Over current level selection. Each respective value means the current
@@ -40,7 +40,7 @@ properties:
in chip default.
richtek,ot-level-select:
- $ref: "/schemas/types.yaml#/definitions/uint8"
+ $ref: /schemas/types.yaml#/definitions/uint8
enum: [0, 1, 2]
description: |
Over temperature level selection. Each respective value means the degree
@@ -48,7 +48,7 @@ properties:
default.
richtek,pgdly-time-select:
- $ref: "/schemas/types.yaml#/definitions/uint8"
+ $ref: /schemas/types.yaml#/definitions/uint8
enum: [0, 1, 2, 3]
description: |
Power good signal delay time selection. Each respective value means the
@@ -57,7 +57,7 @@ properties:
richtek,switch-freq-select:
- $ref: "/schemas/types.yaml#/definitions/uint8"
+ $ref: /schemas/types.yaml#/definitions/uint8
enum: [0, 1, 2]
description: |
Buck switch frequency selection. Each respective value means 400KHz,
diff --git a/Documentation/devicetree/bindings/regulator/richtek,rtmv20-regulator.yaml b/Documentation/devicetree/bindings/regulator/richtek,rtmv20-regulator.yaml
index a8ccb5cb8d77..446ec5127d1f 100644
--- a/Documentation/devicetree/bindings/regulator/richtek,rtmv20-regulator.yaml
+++ b/Documentation/devicetree/bindings/regulator/richtek,rtmv20-regulator.yaml
@@ -120,7 +120,7 @@ properties:
lsw:
description: load switch current regulator description.
type: object
- $ref: "regulator.yaml#"
+ $ref: regulator.yaml#
required:
- compatible
diff --git a/Documentation/devicetree/bindings/regulator/rohm,bd71815-regulator.yaml b/Documentation/devicetree/bindings/regulator/rohm,bd71815-regulator.yaml
index 027fab3dc181..cc4ceb32e9d6 100644
--- a/Documentation/devicetree/bindings/regulator/rohm,bd71815-regulator.yaml
+++ b/Documentation/devicetree/bindings/regulator/rohm,bd71815-regulator.yaml
@@ -56,7 +56,7 @@ patternProperties:
PMIC "RUN" state voltage in uV when PMIC HW states are used. See
comments below for bucks/LDOs which support this. 0 means
regulator should be disabled at RUN state.
- $ref: "/schemas/types.yaml#/definitions/uint32"
+ $ref: /schemas/types.yaml#/definitions/uint32
minimum: 0
maximum: 3300000
@@ -67,7 +67,7 @@ patternProperties:
keeps regulator enabled. BD71815 does not change voltage level
when PMIC transitions to SNVS.SNVS voltage depends on the previous
state (from which the PMIC transitioned to SNVS).
- $ref: "/schemas/types.yaml#/definitions/uint32"
+ $ref: /schemas/types.yaml#/definitions/uint32
minimum: 0
maximum: 3300000
@@ -76,7 +76,7 @@ patternProperties:
PMIC "SUSPEND" state voltage in uV when PMIC HW states are used. See
comments below for bucks/LDOs which support this. 0 means
regulator should be disabled at SUSPEND state.
- $ref: "/schemas/types.yaml#/definitions/uint32"
+ $ref: /schemas/types.yaml#/definitions/uint32
minimum: 0
maximum: 3300000
@@ -85,7 +85,7 @@ patternProperties:
PMIC "LPSR" state voltage in uV when PMIC HW states are used. See
comments below for bucks/LDOs which support this. 0 means
regulator should be disabled at LPSR state.
- $ref: "/schemas/types.yaml#/definitions/uint32"
+ $ref: /schemas/types.yaml#/definitions/uint32
minimum: 0
maximum: 3300000
diff --git a/Documentation/devicetree/bindings/regulator/rohm,bd71828-regulator.yaml b/Documentation/devicetree/bindings/regulator/rohm,bd71828-regulator.yaml
index bbf38d5cd06d..d898800d6bca 100644
--- a/Documentation/devicetree/bindings/regulator/rohm,bd71828-regulator.yaml
+++ b/Documentation/devicetree/bindings/regulator/rohm,bd71828-regulator.yaml
@@ -52,7 +52,7 @@ patternProperties:
description:
PMIC default "RUN" state voltage in uV. See below table for
bucks which support this. 0 means disabled.
- $ref: "/schemas/types.yaml#/definitions/uint32"
+ $ref: /schemas/types.yaml#/definitions/uint32
minimum: 0
maximum: 3300000
@@ -60,7 +60,7 @@ patternProperties:
description:
PMIC default "IDLE" state voltage in uV. See below table for
bucks which support this. 0 means disabled.
- $ref: "/schemas/types.yaml#/definitions/uint32"
+ $ref: /schemas/types.yaml#/definitions/uint32
minimum: 0
maximum: 3300000
@@ -68,7 +68,7 @@ patternProperties:
description:
PMIC default "SUSPEND" state voltage in uV. See below table for
bucks which support this. 0 means disabled.
- $ref: "/schemas/types.yaml#/definitions/uint32"
+ $ref: /schemas/types.yaml#/definitions/uint32
minimum: 0
maximum: 3300000
@@ -76,7 +76,7 @@ patternProperties:
description:
PMIC default "LPSR" state voltage in uV. See below table for
bucks which support this. 0 means disabled.
- $ref: "/schemas/types.yaml#/definitions/uint32"
+ $ref: /schemas/types.yaml#/definitions/uint32
minimum: 0
maximum: 3300000
diff --git a/Documentation/devicetree/bindings/regulator/rohm,bd71837-regulator.yaml b/Documentation/devicetree/bindings/regulator/rohm,bd71837-regulator.yaml
index abf1fbdf3850..29b350a4f88a 100644
--- a/Documentation/devicetree/bindings/regulator/rohm,bd71837-regulator.yaml
+++ b/Documentation/devicetree/bindings/regulator/rohm,bd71837-regulator.yaml
@@ -55,7 +55,7 @@ patternProperties:
should be "buck1", ..., "buck8"
rohm,dvs-run-voltage:
- $ref: "/schemas/types.yaml#/definitions/uint32"
+ $ref: /schemas/types.yaml#/definitions/uint32
minimum: 0
maximum: 1300000
description:
@@ -63,7 +63,7 @@ patternProperties:
bucks which support this. 0 means disabled.
rohm,dvs-idle-voltage:
- $ref: "/schemas/types.yaml#/definitions/uint32"
+ $ref: /schemas/types.yaml#/definitions/uint32
minimum: 0
maximum: 1300000
description:
@@ -71,7 +71,7 @@ patternProperties:
bucks which support this. 0 means disabled.
rohm,dvs-suspend-voltage:
- $ref: "/schemas/types.yaml#/definitions/uint32"
+ $ref: /schemas/types.yaml#/definitions/uint32
minimum: 0
maximum: 1300000
description:
diff --git a/Documentation/devicetree/bindings/regulator/rohm,bd71847-regulator.yaml b/Documentation/devicetree/bindings/regulator/rohm,bd71847-regulator.yaml
index 34ce781954b6..7ba4ccf723d8 100644
--- a/Documentation/devicetree/bindings/regulator/rohm,bd71847-regulator.yaml
+++ b/Documentation/devicetree/bindings/regulator/rohm,bd71847-regulator.yaml
@@ -54,7 +54,7 @@ patternProperties:
should be "buck1", ..., "buck6"
rohm,dvs-run-voltage:
- $ref: "/schemas/types.yaml#/definitions/uint32"
+ $ref: /schemas/types.yaml#/definitions/uint32
minimum: 0
maximum: 1300000
description:
@@ -62,7 +62,7 @@ patternProperties:
bucks which support this. 0 means disabled.
rohm,dvs-idle-voltage:
- $ref: "/schemas/types.yaml#/definitions/uint32"
+ $ref: /schemas/types.yaml#/definitions/uint32
minimum: 0
maximum: 1300000
description:
@@ -70,7 +70,7 @@ patternProperties:
bucks which support this. 0 means disabled.
rohm,dvs-suspend-voltage:
- $ref: "/schemas/types.yaml#/definitions/uint32"
+ $ref: /schemas/types.yaml#/definitions/uint32
minimum: 0
maximum: 1300000
description:
diff --git a/Documentation/devicetree/bindings/regulator/rohm,bd9576-regulator.yaml b/Documentation/devicetree/bindings/regulator/rohm,bd9576-regulator.yaml
index 89b8592db81d..f573128da06f 100644
--- a/Documentation/devicetree/bindings/regulator/rohm,bd9576-regulator.yaml
+++ b/Documentation/devicetree/bindings/regulator/rohm,bd9576-regulator.yaml
@@ -25,7 +25,7 @@ patternProperties:
type: object
description:
Properties for single regulator.
- $ref: "regulator.yaml#"
+ $ref: regulator.yaml#
properties:
rohm,ocw-fet-ron-micro-ohms:
diff --git a/Documentation/devicetree/bindings/regulator/socionext,uniphier-regulator.yaml b/Documentation/devicetree/bindings/regulator/socionext,uniphier-regulator.yaml
index a6949a581cd1..ddaa112252e5 100644
--- a/Documentation/devicetree/bindings/regulator/socionext,uniphier-regulator.yaml
+++ b/Documentation/devicetree/bindings/regulator/socionext,uniphier-regulator.yaml
@@ -42,7 +42,7 @@ properties:
reset-names: true
allOf:
- - $ref: "regulator.yaml#"
+ - $ref: regulator.yaml#
- if:
properties:
compatible:
diff --git a/Documentation/devicetree/bindings/regulator/st,stm32-booster.yaml b/Documentation/devicetree/bindings/regulator/st,stm32-booster.yaml
index c82f6f885d97..c863100f6e7d 100644
--- a/Documentation/devicetree/bindings/regulator/st,stm32-booster.yaml
+++ b/Documentation/devicetree/bindings/regulator/st,stm32-booster.yaml
@@ -14,7 +14,7 @@ description: |
to supply ADC analog input switches.
allOf:
- - $ref: "regulator.yaml#"
+ - $ref: regulator.yaml#
properties:
compatible:
@@ -23,7 +23,7 @@ properties:
- st,stm32mp1-booster
st,syscfg:
- $ref: "/schemas/types.yaml#/definitions/phandle"
+ $ref: /schemas/types.yaml#/definitions/phandle
description: phandle to system configuration controller.
vdda-supply:
diff --git a/Documentation/devicetree/bindings/regulator/st,stm32-vrefbuf.yaml b/Documentation/devicetree/bindings/regulator/st,stm32-vrefbuf.yaml
index c1bf1f90490a..05f4ad2c7d3a 100644
--- a/Documentation/devicetree/bindings/regulator/st,stm32-vrefbuf.yaml
+++ b/Documentation/devicetree/bindings/regulator/st,stm32-vrefbuf.yaml
@@ -15,7 +15,7 @@ maintainers:
- Fabrice Gasnier <fabrice.gasnier@foss.st.com>
allOf:
- - $ref: "regulator.yaml#"
+ - $ref: regulator.yaml#
properties:
compatible:
diff --git a/Documentation/devicetree/bindings/regulator/st,stm32mp1-pwr-reg.yaml b/Documentation/devicetree/bindings/regulator/st,stm32mp1-pwr-reg.yaml
index bd07b9c81570..7d53cfa2c288 100644
--- a/Documentation/devicetree/bindings/regulator/st,stm32mp1-pwr-reg.yaml
+++ b/Documentation/devicetree/bindings/regulator/st,stm32mp1-pwr-reg.yaml
@@ -26,7 +26,7 @@ patternProperties:
"^(reg11|reg18|usb33)$":
type: object
- $ref: "regulator.yaml#"
+ $ref: regulator.yaml#
required:
- compatible
diff --git a/Documentation/devicetree/bindings/regulator/ti,tps62360.yaml b/Documentation/devicetree/bindings/regulator/ti,tps62360.yaml
index 12aeddedde05..90c39275c150 100644
--- a/Documentation/devicetree/bindings/regulator/ti,tps62360.yaml
+++ b/Documentation/devicetree/bindings/regulator/ti,tps62360.yaml
@@ -19,7 +19,7 @@ description: |
https://www.ti.com/lit/gpn/tps62360
allOf:
- - $ref: "regulator.yaml#"
+ - $ref: regulator.yaml#
properties:
compatible:
diff --git a/Documentation/devicetree/bindings/regulator/vqmmc-ipq4019-regulator.yaml b/Documentation/devicetree/bindings/regulator/vqmmc-ipq4019-regulator.yaml
index dd7a2f92634c..3b16a25ba3b8 100644
--- a/Documentation/devicetree/bindings/regulator/vqmmc-ipq4019-regulator.yaml
+++ b/Documentation/devicetree/bindings/regulator/vqmmc-ipq4019-regulator.yaml
@@ -15,7 +15,7 @@ description: |
controller is also embedded.
allOf:
- - $ref: "regulator.yaml#"
+ - $ref: regulator.yaml#
properties:
compatible:
diff --git a/Documentation/devicetree/bindings/regulator/wlf,arizona.yaml b/Documentation/devicetree/bindings/regulator/wlf,arizona.yaml
index 7b4ae5d23351..011819c10988 100644
--- a/Documentation/devicetree/bindings/regulator/wlf,arizona.yaml
+++ b/Documentation/devicetree/bindings/regulator/wlf,arizona.yaml
@@ -21,19 +21,19 @@ properties:
wlf,ldoena:
description:
GPIO specifier for the GPIO controlling LDOENA.
- $ref: "/schemas/types.yaml#/definitions/phandle-array"
+ $ref: /schemas/types.yaml#/definitions/phandle-array
maxItems: 1
ldo1:
description:
Initial data for the LDO1 regulator.
- $ref: "regulator.yaml#"
+ $ref: regulator.yaml#
type: object
micvdd:
description:
Initial data for the MICVDD regulator.
- $ref: "regulator.yaml#"
+ $ref: regulator.yaml#
type: object
additionalProperties: true
--
2.39.2
On Fri, 17 Mar 2023 18:36:14 -0500, Rob Herring wrote: > Cleanup bindings dropping unneeded quotes. Once all these are fixed, > checking for this can be enabled in yamllint. > > Applied to https://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator.git for-next Thanks! [1/1] regulator: dt-bindings: Drop unneeded quotes commit: cff5c895137cb5c3d48811881f111b17c444e2d5 All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted. You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed. If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced. Please add any relevant lists and maintainers to the CCs when replying to this mail. Thanks, Mark
On 18/03/2023 00:36, Rob Herring wrote: > Cleanup bindings dropping unneeded quotes. Once all these are fixed, > checking for this can be enabled in yamllint. > > Signed-off-by: Rob Herring <robh@kernel.org> > --- Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Best regards, Krzysztof
© 2016 - 2024 Red Hat, Inc.