[PATCH V2 1/2] arm64: dts: ti: k3-am62-wakeup: Introduce RTC node

Nishanth Menon posted 2 patches 2 years, 11 months ago
There is a newer version of this series
[PATCH V2 1/2] arm64: dts: ti: k3-am62-wakeup: Introduce RTC node
Posted by Nishanth Menon 2 years, 11 months ago
Introduce digital RTC node in wakeup domain. Even though this has
no specific battery backup supply, this on-chip RTC is used in
cost-optimized board designs as a wakeup source.

Signed-off-by: Nishanth Menon <nm@ti.com>
---

No changes since V1
V1: https://lore.kernel.org/all/20230311105850.21811-2-nm@ti.com/

 arch/arm64/boot/dts/ti/k3-am62-wakeup.dtsi | 10 ++++++++++
 1 file changed, 10 insertions(+)

diff --git a/arch/arm64/boot/dts/ti/k3-am62-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-am62-wakeup.dtsi
index 38dced6b4fef..fec81546fbbd 100644
--- a/arch/arm64/boot/dts/ti/k3-am62-wakeup.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am62-wakeup.dtsi
@@ -40,4 +40,14 @@ wkup_i2c0: i2c@2b200000 {
 		clock-names = "fck";
 		status = "disabled";
 	};
+
+	wkup_rtc0: rtc@2b1f0000 {
+		compatible = "ti,am62-rtc";
+		reg = <0x00 0x2b1f0000 0x00 0x100>;
+		interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 117 6> , <&k3_clks 117 0>;
+		clock-names = "vbus", "osc32k";
+		power-domains = <&k3_pds 117 TI_SCI_PD_EXCLUSIVE>;
+		wakeup-source;
+	};
 };
-- 
2.40.0
Re: [PATCH V2 1/2] arm64: dts: ti: k3-am62-wakeup: Introduce RTC node
Posted by Dhruva Gole 2 years, 10 months ago
Hi,

On 15/03/23 22:37, Nishanth Menon wrote:
> Introduce digital RTC node in wakeup domain. Even though this has
> no specific battery backup supply, this on-chip RTC is used in
> cost-optimized board designs as a wakeup source.
>
> Signed-off-by: Nishanth Menon <nm@ti.com>
> ---
>
> No changes since V1
> V1: https://lore.kernel.org/all/20230311105850.21811-2-nm@ti.com/
>
>  arch/arm64/boot/dts/ti/k3-am62-wakeup.dtsi | 10 ++++++++++
>  1 file changed, 10 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/ti/k3-am62-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-am62-wakeup.dtsi
> index 38dced6b4fef..fec81546fbbd 100644
> --- a/arch/arm64/boot/dts/ti/k3-am62-wakeup.dtsi
> +++ b/arch/arm64/boot/dts/ti/k3-am62-wakeup.dtsi
> @@ -40,4 +40,14 @@ wkup_i2c0: i2c@2b200000 {
>  		clock-names = "fck";
>  		status = "disabled";
>  	};
> +
> +	wkup_rtc0: rtc@2b1f0000 {
> +		compatible = "ti,am62-rtc";
> +		reg = <0x00 0x2b1f0000 0x00 0x100>;
> +		interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
> +		clocks = <&k3_clks 117 6> , <&k3_clks 117 0>;
> +		clock-names = "vbus", "osc32k";
> +		power-domains = <&k3_pds 117 TI_SCI_PD_EXCLUSIVE>;
> +		wakeup-source;
> +	};
>  };

LGTM!

Reviewed-by: Dhruva Gole <d-gole@ti.com>

-- 
Best regards,
Dhruva Gole
Texas Instruments Incorporated