Devicetree binding documentation for Analog Devices MAX313XX RTCs
Signed-off-by: Ibrahim Tilki <Ibrahim.Tilki@analog.com>
Signed-off-by: Zeynep Arslanbenzer <Zeynep.Arslanbenzer@analog.com>
---
.../devicetree/bindings/rtc/adi,max313xx.yaml | 142 ++++++++++++++++++
1 file changed, 142 insertions(+)
create mode 100644 Documentation/devicetree/bindings/rtc/adi,max313xx.yaml
diff --git a/Documentation/devicetree/bindings/rtc/adi,max313xx.yaml b/Documentation/devicetree/bindings/rtc/adi,max313xx.yaml
new file mode 100644
index 000000000..bed6d0bc4
--- /dev/null
+++ b/Documentation/devicetree/bindings/rtc/adi,max313xx.yaml
@@ -0,0 +1,142 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright 2022 Analog Devices Inc.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/rtc/adi,max313xx.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices MAX313XX series I2C RTCs
+
+maintainers:
+ - Ibrahim Tilki <Ibrahim.Tilki@analog.com>
+ - Zeynep Arslanbenzer <Zeynep.Arslanbenzer@analog.com>
+
+description: Analog Devices MAX313XX series I2C RTCs.
+
+properties:
+ compatible:
+ enum:
+ - adi,max31328
+ - adi,max31329
+ - adi,max31331
+ - adi,max31334
+ - adi,max31341
+ - adi,max31342
+ - adi,max31343
+
+ reg:
+ description: I2C address of the RTC
+ items:
+ - enum: [0x68, 0x69]
+
+ interrupts:
+ description: |
+ Alarm1 interrupt line of the RTC. Some of the RTCs have two interrupt
+ lines and alarm1 interrupt muxing depends on the clockin/clockout
+ configuration.
+ maxItems: 1
+
+ "#clock-cells":
+ description: |
+ RTC can be used as a clock source through its clock output pin when
+ supplied.
+ const: 0
+
+ clocks:
+ description: |
+ RTC uses this clock for clock input when supplied. Clock has to provide
+ one of these four frequencies: 1Hz, 50Hz, 60Hz or 32.768kHz.
+ maxItems: 1
+
+ aux-voltage-chargeable: true
+
+ trickle-resistor-ohms:
+ description: Enables trickle charger with specified resistor value.
+ enum: [3000, 6000, 11000]
+
+ adi,trickle-diode-enable:
+ description: Charge the auxiliary voltage with a diode.
+ type: boolean
+
+additionalProperties: false
+
+allOf:
+ - $ref: rtc.yaml#
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - adi,max31328
+ - adi,max31342
+
+ then:
+ properties:
+ aux-voltage-chargeable: false
+ trickle-resistor-ohms: false
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - adi,max31328
+ - adi,max31331
+ - adi,max31334
+ - adi,max31343
+
+ then:
+ properties:
+ clocks: false
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - adi,max31341
+ - adi,max31342
+
+ then:
+ properties:
+ reg:
+ items:
+ - const: 0x69
+
+ else:
+ properties:
+ reg:
+ items:
+ - const: 0x68
+
+required:
+ - compatible
+ - reg
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/irq.h>
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ rtc@68 {
+ reg = <0x68>;
+ compatible = "adi,max31329";
+ clocks = <&clkin>;
+ interrupt-parent = <&gpio>;
+ interrupts = <26 IRQ_TYPE_EDGE_FALLING>;
+ };
+ };
+ - |
+ #include <dt-bindings/interrupt-controller/irq.h>
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ rtc@68 {
+ reg = <0x68>;
+ compatible = "adi,max31331";
+ #clock-cells = <0>;
+ };
+ };
--
2.25.1On 15/03/2023 17:16, Ibrahim Tilki wrote: > Devicetree binding documentation for Analog Devices MAX313XX RTCs > > Signed-off-by: Ibrahim Tilki <Ibrahim.Tilki@analog.com> > Signed-off-by: Zeynep Arslanbenzer <Zeynep.Arslanbenzer@analog.com> > --- > .../devicetree/bindings/rtc/adi,max313xx.yaml | 142 ++++++++++++++++++ > 1 file changed, 142 insertions(+) > create mode 100644 Documentation/devicetree/bindings/rtc/adi,max313xx.yaml > > diff --git a/Documentation/devicetree/bindings/rtc/adi,max313xx.yaml b/Documentation/devicetree/bindings/rtc/adi,max313xx.yaml > new file mode 100644 > index 000000000..bed6d0bc4 > --- /dev/null > +++ b/Documentation/devicetree/bindings/rtc/adi,max313xx.yaml > @@ -0,0 +1,142 @@ > +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) > +# Copyright 2022 Analog Devices Inc. > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/rtc/adi,max313xx.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: Analog Devices MAX313XX series I2C RTCs > + > +maintainers: > + - Ibrahim Tilki <Ibrahim.Tilki@analog.com> > + - Zeynep Arslanbenzer <Zeynep.Arslanbenzer@analog.com> > + > +description: Analog Devices MAX313XX series I2C RTCs. > + > +properties: > + compatible: > + enum: > + - adi,max31328 > + - adi,max31329 > + - adi,max31331 > + - adi,max31334 > + - adi,max31341 > + - adi,max31342 > + - adi,max31343 > + > + reg: > + description: I2C address of the RTC > + items: > + - enum: [0x68, 0x69] > + > + interrupts: > + description: | > + Alarm1 interrupt line of the RTC. Some of the RTCs have two interrupt > + lines and alarm1 interrupt muxing depends on the clockin/clockout > + configuration. > + maxItems: 1 > + > + "#clock-cells": > + description: | > + RTC can be used as a clock source through its clock output pin when > + supplied. > + const: 0 > + > + clocks: > + description: | > + RTC uses this clock for clock input when supplied. Clock has to provide > + one of these four frequencies: 1Hz, 50Hz, 60Hz or 32.768kHz. > + maxItems: 1 > + > + aux-voltage-chargeable: true Drop, coming from rtc.yaml. > + > + trickle-resistor-ohms: > + description: Enables trickle charger with specified resistor value. > + enum: [3000, 6000, 11000] > + > + adi,trickle-diode-enable: > + description: Charge the auxiliary voltage with a diode. > + type: boolean > + > +additionalProperties: false Use order like in example-schema, so required, allOf then unevaluatedProperties: false. Best regards, Krzysztof
© 2016 - 2026 Red Hat, Inc.