Enable the Rockchip RK809 audio codec on the NanoPi R5 series.
Signed-off-by: Tianling Shen <cnsztl@gmail.com>
---
.../boot/dts/rockchip/rk3568-nanopi-r5s.dtsi | 15 +++++++++++++++
1 file changed, 15 insertions(+)
diff --git a/arch/arm64/boot/dts/rockchip/rk3568-nanopi-r5s.dtsi b/arch/arm64/boot/dts/rockchip/rk3568-nanopi-r5s.dtsi
index dd9a7907a1c5..8e1a118ae2e3 100644
--- a/arch/arm64/boot/dts/rockchip/rk3568-nanopi-r5s.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3568-nanopi-r5s.dtsi
@@ -35,6 +35,21 @@
};
};
+ rk809-sound {
+ compatible = "simple-audio-card";
+ simple-audio-card,format = "i2s";
+ simple-audio-card,name = "Analog RK809";
+ simple-audio-card,mclk-fs = <256>;
+
+ simple-audio-card,cpu {
+ sound-dai = <&i2s1_8ch>;
+ };
+
+ simple-audio-card,codec {
+ sound-dai = <&rk809>;
+ };
+ };
+
vdd_usbc: vdd-usbc-regulator {
compatible = "regulator-fixed";
regulator-name = "vdd_usbc";
--
2.17.1
On Wed, Mar 15, 2023 at 9:03 AM Tianling Shen <cnsztl@gmail.com> wrote:
Hi Tianling,
> + rk809-sound {
There is no audio jack on my R5S, see [1] and I don't see it on R5C
either, see [2]. I don't see audio output on the pin header either.
How is it supposed to work?
> + compatible = "simple-audio-card";
> + simple-audio-card,format = "i2s";
> + simple-audio-card,name = "Analog RK809";
> + simple-audio-card,mclk-fs = <256>;
> +
> + simple-audio-card,cpu {
> + sound-dai = <&i2s1_8ch>;
> + };
> +
> + simple-audio-card,codec {
> + sound-dai = <&rk809>;
It looks like rk809 doesn't have #sound-dai-cells property and it
results in a warning:
arch/arm64/boot/dts/rockchip/rk3568-nanopi-r5s.dtsi:48.27-50.5:
Warning (sound_dai_property): /rk809-sound/simple-audio-card,codec:
Missing property '#sound-dai-cells' in node /i2c@fdd40000/pmic@20 or
bad phandle (referred from sound-dai[0])
Regards,
Vasily
[1] https://wiki.friendlyelec.com/wiki/index.php/NanoPi_R5S
[2] https://wiki.friendlyelec.com/wiki/index.php/NanoPi_R5C
Hi,
On Thu, Mar 16, 2023 at 7:54 AM Vasily Khoruzhick <anarsoul@gmail.com> wrote:
>
> On Wed, Mar 15, 2023 at 9:03 AM Tianling Shen <cnsztl@gmail.com> wrote:
>
> Hi Tianling,
>
> > + rk809-sound {
>
> There is no audio jack on my R5S, see [1] and I don't see it on R5C
> either, see [2]. I don't see audio output on the pin header either.
> How is it supposed to work?
I was confused by the vendor dts. I found them enabled rk809 audio
codec [1],but also disabled
the I2S1 TDM audio controller. I'm not sure what they want to do.
But from my side I agree this should not be added. And the i2s1_8ch
node in current dts
should be removed as well.
Thanks,
Tianling.
1. https://github.com/friendlyarm/kernel-rockchip/blob/2b22fccccb0c6ff18a6c952fe81e13ba4c9ba6a1/arch/arm64/boot/dts/rockchip/rk3568-nanopi5-common.dtsi#L125-L138
2. https://github.com/friendlyarm/kernel-rockchip/blob/2b22fccccb0c6ff18a6c952fe81e13ba4c9ba6a1/arch/arm64/boot/dts/rockchip/rk3568-nanopi5-common.dtsi#L592-L600
>
> > + compatible = "simple-audio-card";
> > + simple-audio-card,format = "i2s";
> > + simple-audio-card,name = "Analog RK809";
> > + simple-audio-card,mclk-fs = <256>;
> > +
> > + simple-audio-card,cpu {
> > + sound-dai = <&i2s1_8ch>;
> > + };
> > +
> > + simple-audio-card,codec {
> > + sound-dai = <&rk809>;
>
> It looks like rk809 doesn't have #sound-dai-cells property and it
> results in a warning:
>
> arch/arm64/boot/dts/rockchip/rk3568-nanopi-r5s.dtsi:48.27-50.5:
> Warning (sound_dai_property): /rk809-sound/simple-audio-card,codec:
> Missing property '#sound-dai-cells' in node /i2c@fdd40000/pmic@20 or
> bad phandle (referred from sound-dai[0])
Yeah, I did miss some properties here. There are some minor differences between
vendor bindings and upstream ones.
>
> Regards,
> Vasily
>
> [1] https://wiki.friendlyelec.com/wiki/index.php/NanoPi_R5S
> [2] https://wiki.friendlyelec.com/wiki/index.php/NanoPi_R5C
© 2016 - 2026 Red Hat, Inc.