Add binding for a battery that is only monitored via ADC
channels and simple status GPIOs.
Signed-off-by: Sebastian Reichel <sre@kernel.org>
---
.../bindings/power/supply/adc-battery.yaml | 70 +++++++++++++++++++
1 file changed, 70 insertions(+)
create mode 100644 Documentation/devicetree/bindings/power/supply/adc-battery.yaml
diff --git a/Documentation/devicetree/bindings/power/supply/adc-battery.yaml b/Documentation/devicetree/bindings/power/supply/adc-battery.yaml
new file mode 100644
index 000000000000..ed9702caedff
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/supply/adc-battery.yaml
@@ -0,0 +1,70 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/supply/adc-battery.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ADC battery
+
+maintainers:
+ - Sebastian Reichel <sre@kernel.org>
+
+description:
+ Basic battery capacity meter, which only reports basic battery data
+ via ADC channels and optionally indicate that the battery is full by
+ polling a GPIO line.
+
+ The voltage is expected to be measured between the battery terminals
+ and mandatory. The optional current/power channel is expected to
+ monitor the current/power flowing out of the battery. Last but not
+ least the temperature channel is supposed to measure the battery
+ temperature.
+
+allOf:
+ - $ref: power-supply.yaml#
+
+properties:
+ compatible:
+ const: adc-battery
+
+ charged-gpios:
+ description:
+ GPIO which signals that the battery is fully charged. The GPIO is
+ often provided by charger ICs, that are not software controllable.
+ maxItems: 1
+
+ io-channels:
+ minItems: 1
+ maxItems: 4
+
+ io-channel-names:
+ minItems: 1
+ items:
+ - const: voltage
+ - enum: [ current, power, temperature ]
+ - enum: [ power, temperature ]
+ - const: temperature
+
+ monitored-battery: true
+
+required:
+ - compatible
+ - io-channels
+ - io-channel-names
+ - monitored-battery
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+
+ fuel-gauge {
+ compatible = "adc-battery";
+ charged-gpios = <&gpio 42 GPIO_ACTIVE_HIGH>;
+ io-channels = <&adc 13>, <&adc 37>;
+ io-channel-names = "voltage", "current";
+
+ power-supplies = <&charger>;
+ monitored-battery = <&battery>;
+ };
--
2.39.2