From: Pratyush Yadav <p.yadav@ti.com>
TI's J721E uses the Cadence CSI2RX and DPHY peripherals to facilitate
capture over a CSI-2 bus. The TI CSI2RX platform driver glues all the
parts together.
Signed-off-by: Pratyush Yadav <p.yadav@ti.com>
Signed-off-by: Vaishnav Achath <vaishnav.a@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Rob Herring <robh@kernel.org>
---
(no changes since v5)
Changes in v5:
- Add Laurent's and Rob's R-by.
Changes in v2:
- Rename to ti,j721e-csi2rx.yaml
- Add an entry in MAINTAINERS.
- Add a description for the binding.
- Change compatible to ti,j721e-csi2rx to make it SoC specific.
- Remove description from dmas, reg, power-domains.
- Remove a limit of 2 from #address-cells and #size-cells.
- Fix add ^ to csi-bridge subnode regex.
- Make ranges mandatory.
- Add unit address in example.
- Add a reference to cdns,csi2rx in csi-bridge subnode.
- Expand the example to include the csi-bridge subnode as well.
- Re-order subject prefixes.
.../bindings/media/ti,j721e-csi2rx.yaml | 101 ++++++++++++++++++
MAINTAINERS | 1 +
2 files changed, 102 insertions(+)
create mode 100644 Documentation/devicetree/bindings/media/ti,j721e-csi2rx.yaml
diff --git a/Documentation/devicetree/bindings/media/ti,j721e-csi2rx.yaml b/Documentation/devicetree/bindings/media/ti,j721e-csi2rx.yaml
new file mode 100644
index 000000000000..db87cfd65bed
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/ti,j721e-csi2rx.yaml
@@ -0,0 +1,101 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/ti,j721e-csi2rx.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TI J721E CSI2RX Wrapper Device Tree Bindings
+
+description: |
+ The TI J721E CSI2RX Wrapper is a wrapper around Cadence CSI2RX bridge that
+ enables sending captured frames to memory over PSI-L DMA. In the J721E
+ Technical Reference Manual (SPRUIL1B) it is referred to as "SHIM" under the
+ CSI_RX_IF section.
+
+maintainers:
+ - Pratyush Yadav <p.yadav@ti.com>
+
+properties:
+ compatible:
+ items:
+ - const: ti,j721e-csi2rx
+
+ dmas:
+ maxItems: 1
+
+ dma-names:
+ items:
+ - const: rx0
+
+ reg:
+ maxItems: 1
+
+ power-domains:
+ maxItems: 1
+
+ ranges: true
+
+ "#address-cells": true
+
+ "#size-cells": true
+
+patternProperties:
+ "^csi-bridge@":
+ type: object
+ description: CSI2 bridge node.
+ $ref: cdns,csi2rx.yaml#
+
+required:
+ - compatible
+ - reg
+ - dmas
+ - dma-names
+ - power-domains
+ - ranges
+ - "#address-cells"
+ - "#size-cells"
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/soc/ti,sci_pm_domain.h>
+
+ ti_csi2rx0: ticsi2rx@4500000 {
+ compatible = "ti,j721e-csi2rx";
+ dmas = <&main_udmap 0x4940>;
+ dma-names = "rx0";
+ reg = <0x4500000 0x1000>;
+ power-domains = <&k3_pds 26 TI_SCI_PD_EXCLUSIVE>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ cdns_csi2rx: csi-bridge@4504000 {
+ compatible = "cdns,csi2rx";
+ reg = <0x4504000 0x1000>;
+ clocks = <&k3_clks 26 2>, <&k3_clks 26 0>, <&k3_clks 26 2>,
+ <&k3_clks 26 2>, <&k3_clks 26 3>, <&k3_clks 26 3>;
+ clock-names = "sys_clk", "p_clk", "pixel_if0_clk",
+ "pixel_if1_clk", "pixel_if2_clk", "pixel_if3_clk";
+ phys = <&dphy0>;
+ phy-names = "dphy";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ csi2_0: port@0 {
+
+ reg = <0>;
+
+ csi2rx0_in_sensor: endpoint {
+ remote-endpoint = <&csi2_cam0>;
+ bus-type = <4>; /* CSI2 DPHY. */
+ clock-lanes = <0>;
+ data-lanes = <1 2>;
+ };
+ };
+ };
+ };
+ };
diff --git a/MAINTAINERS b/MAINTAINERS
index 69c2b0f48073..796be64bc54f 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -20905,6 +20905,7 @@ TI J721E CSI2RX DRIVER
M: Vaishnav Achath <vaishnav.a@ti.com>
L: linux-media@vger.kernel.org
S: Supported
+F: Documentation/devicetree/bindings/media/ti,j721e-csi2rx.yaml
F: drivers/media/platform/ti/j721e-csi2rx/
TI DAVINCI MACHINE SUPPORT
--
2.17.1On 14/03/2023 12:55, Vaishnav Achath wrote: > From: Pratyush Yadav <p.yadav@ti.com> > > TI's J721E uses the Cadence CSI2RX and DPHY peripherals to facilitate > capture over a CSI-2 bus. The TI CSI2RX platform driver glues all the > parts together. > > Signed-off-by: Pratyush Yadav <p.yadav@ti.com> > Signed-off-by: Vaishnav Achath <vaishnav.a@ti.com> > Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> > Reviewed-by: Rob Herring <robh@kernel.org> > --- > +$id: http://devicetree.org/schemas/media/ti,j721e-csi2rx.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: TI J721E CSI2RX Wrapper Device Tree Bindings Drop "Device Tree Bindings" > + > +description: | > + The TI J721E CSI2RX Wrapper is a wrapper around Cadence CSI2RX bridge that > + enables sending captured frames to memory over PSI-L DMA. In the J721E > + Technical Reference Manual (SPRUIL1B) it is referred to as "SHIM" under the > + CSI_RX_IF section. > + > +maintainers: > + - Pratyush Yadav <p.yadav@ti.com> > + > +properties: > + compatible: > + items: Drop items > + - const: ti,j721e-csi2rx > + > + dmas: > + maxItems: 1 > + > + dma-names: > + items: > + - const: rx0 > + > + reg: > + maxItems: 1 > + > + power-domains: > + maxItems: 1 > + > + ranges: true > + > + "#address-cells": true > + > + "#size-cells": true > + > +patternProperties: > + "^csi-bridge@": > + type: object > + description: CSI2 bridge node. > + $ref: cdns,csi2rx.yaml# Your patch fails here. This error must be fixed or explain as dependency in the patch changelog. Patch cannot be taken without that dependency. Best regards, Krzysztof
On Tue, 14 Mar 2023 17:25:15 +0530, Vaishnav Achath wrote:
> From: Pratyush Yadav <p.yadav@ti.com>
>
> TI's J721E uses the Cadence CSI2RX and DPHY peripherals to facilitate
> capture over a CSI-2 bus. The TI CSI2RX platform driver glues all the
> parts together.
>
> Signed-off-by: Pratyush Yadav <p.yadav@ti.com>
> Signed-off-by: Vaishnav Achath <vaishnav.a@ti.com>
> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
> Reviewed-by: Rob Herring <robh@kernel.org>
> ---
>
> (no changes since v5)
>
> Changes in v5:
> - Add Laurent's and Rob's R-by.
>
> Changes in v2:
> - Rename to ti,j721e-csi2rx.yaml
> - Add an entry in MAINTAINERS.
> - Add a description for the binding.
> - Change compatible to ti,j721e-csi2rx to make it SoC specific.
> - Remove description from dmas, reg, power-domains.
> - Remove a limit of 2 from #address-cells and #size-cells.
> - Fix add ^ to csi-bridge subnode regex.
> - Make ranges mandatory.
> - Add unit address in example.
> - Add a reference to cdns,csi2rx in csi-bridge subnode.
> - Expand the example to include the csi-bridge subnode as well.
> - Re-order subject prefixes.
>
> .../bindings/media/ti,j721e-csi2rx.yaml | 101 ++++++++++++++++++
> MAINTAINERS | 1 +
> 2 files changed, 102 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/media/ti,j721e-csi2rx.yaml
>
My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
on your patch (DT_CHECKER_FLAGS is new in v5.13):
yamllint warnings/errors:
dtschema/dtc warnings/errors:
./Documentation/devicetree/bindings/media/ti,j721e-csi2rx.yaml: Unable to find schema file matching $id: http://devicetree.org/schemas/media/cdns,csi2rx.yaml
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/media/ti,j721e-csi2rx.example.dtb: ticsi2rx@4500000: csi-bridge@4504000: False schema does not allow {'compatible': ['cdns,csi2rx'], 'reg': [[72368128, 4096]], 'clocks': [[4294967295, 26, 2], [4294967295, 26, 0], [4294967295, 26, 2], [4294967295, 26, 2], [4294967295, 26, 3], [4294967295, 26, 3]], 'clock-names': ['sys_clk', 'p_clk', 'pixel_if0_clk', 'pixel_if1_clk', 'pixel_if2_clk', 'pixel_if3_clk'], 'phys': [[4294967295]], 'phy-names': ['dphy'], 'ports': {'#address-cells': [[1]], '#size-cells': [[0]], 'port@0': {'reg': [[0]], 'endpoint': {'remote-endpoint': [[4294967295]], 'bus-type': [[4]], 'clock-lanes': [[0]], 'data-lanes': [[1, 2]]}}}}
From schema: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/media/ti,j721e-csi2rx.yaml
Documentation/devicetree/bindings/media/ti,j721e-csi2rx.example.dtb: /example-0/ticsi2rx@4500000/csi-bridge@4504000: failed to match any schema with compatible: ['cdns,csi2rx']
doc reference errors (make refcheckdocs):
See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20230314115516.667-13-vaishnav.a@ti.com
The base for the series is generally the latest rc1. A different dependency
should be noted in *this* patch.
If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:
pip3 install dtschema --upgrade
Please check and re-submit after running the above command yourself. Note
that DT_SCHEMA_FILES can be set to your schema file to speed up checking
your schema. However, it must be unset to test all examples with your schema.
© 2016 - 2026 Red Hat, Inc.