[v2] PHY-GMII-SEL: Add support for SGMII mode

[PATCH v2 0/3] PHY-GMII-SEL: Add support for SGMII mode

Posted by Siddharth Vadapalli 3 years, 1 month ago

Hello,

This series adds support to configure the CPSW MAC's PHY in SGMII mode.
Also, SGMII mode is enabled for TI's J7200 and J721E SoCs.

Changes from v1:
1. Add "break" statement within "case PHY_INTERFACE_MODE_SGMII".
2. Add newline before "default" case.
3. Update commit message of patch 1/3 to follow the existing convention.

v1:
https://lore.kernel.org/r/20230309062237.389444-1-s-vadapalli@ti.com/

Siddharth Vadapalli (3):
  phy: ti: gmii-sel: Add support for SGMII mode
  phy: ti: gmii-sel: Enable SGMII mode for J7200
  phy: ti: gmii-sel: Enable SGMII mode for J721E

 drivers/phy/ti/phy-gmii-sel.c | 12 ++++++++++--
 1 file changed, 10 insertions(+), 2 deletions(-)

-- 
2.25.1

Re: [PATCH v2 0/3] PHY-GMII-SEL: Add support for SGMII mode

Posted by Vinod Koul 2 years, 11 months ago

On 09-03-23, 12:05, Siddharth Vadapalli wrote:
> Hello,
> 
> This series adds support to configure the CPSW MAC's PHY in SGMII mode.
> Also, SGMII mode is enabled for TI's J7200 and J721E SoCs.

Applied, thanks

-- 
~Vinod

Re: [PATCH v2 0/3] PHY-GMII-SEL: Add support for SGMII mode

Posted by Roger Quadros 3 years ago


On 09/03/2023 08:35, Siddharth Vadapalli wrote:
> Hello,
> 
> This series adds support to configure the CPSW MAC's PHY in SGMII mode.
> Also, SGMII mode is enabled for TI's J7200 and J721E SoCs.
> 
> Changes from v1:
> 1. Add "break" statement within "case PHY_INTERFACE_MODE_SGMII".
> 2. Add newline before "default" case.
> 3. Update commit message of patch 1/3 to follow the existing convention.
> 
> v1:
> https://lore.kernel.org/r/20230309062237.389444-1-s-vadapalli@ti.com/
> 
> Siddharth Vadapalli (3):
>   phy: ti: gmii-sel: Add support for SGMII mode
>   phy: ti: gmii-sel: Enable SGMII mode for J7200
>   phy: ti: gmii-sel: Enable SGMII mode for J721E
> 
>  drivers/phy/ti/phy-gmii-sel.c | 12 ++++++++++--
>  1 file changed, 10 insertions(+), 2 deletions(-)
> 

For the series:

Reviewed-by: Roger Quadros <rogerq@kernel.org>

Re: [PATCH v2 0/3] PHY-GMII-SEL: Add support for SGMII mode

Posted by Siddharth Vadapalli 3 years ago

Hello,

This series applies cleanly as of next-20230404. Please merge this series
followed by the series at:
https://lore.kernel.org/r/20230331062521.529005-1-s-vadapalli@ti.com/
in case of no concerns.

Regards,
Siddharth.

On 09/03/23 12:05, Siddharth Vadapalli wrote:
> Hello,
> 
> This series adds support to configure the CPSW MAC's PHY in SGMII mode.
> Also, SGMII mode is enabled for TI's J7200 and J721E SoCs.
> 
> Changes from v1:
> 1. Add "break" statement within "case PHY_INTERFACE_MODE_SGMII".
> 2. Add newline before "default" case.
> 3. Update commit message of patch 1/3 to follow the existing convention.
> 
> v1:
> https://lore.kernel.org/r/20230309062237.389444-1-s-vadapalli@ti.com/
> 
> Siddharth Vadapalli (3):
>   phy: ti: gmii-sel: Add support for SGMII mode
>   phy: ti: gmii-sel: Enable SGMII mode for J7200
>   phy: ti: gmii-sel: Enable SGMII mode for J721E
> 
>  drivers/phy/ti/phy-gmii-sel.c | 12 ++++++++++--
>  1 file changed, 10 insertions(+), 2 deletions(-)
>