1. Patchew
  2. linux
  3. [RESEND] [PATCHv3 0/7] RK3588 Thermal Support
  4. View patch

[RESEND] [PATCHv3 4/7] thermal: rockchip: Simplify channel id logic

Sebastian Reichel posted 7 patches 2 years, 11 months ago
[RESEND] [PATCHv3 4/7] thermal: rockchip: Simplify channel id logic
Posted by Sebastian Reichel 2 years, 11 months ago 
Replace the channel ID lookup table by a simple offset, since
the channel IDs are consecutive.

Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
---
 drivers/thermal/rockchip_thermal.c | 48 +++++++++++++-----------------
 1 file changed, 21 insertions(+), 27 deletions(-)

diff --git a/drivers/thermal/rockchip_thermal.c b/drivers/thermal/rockchip_thermal.c
index 9ed45b318344..bcbdd618daae 100644
--- a/drivers/thermal/rockchip_thermal.c
+++ b/drivers/thermal/rockchip_thermal.c
@@ -39,15 +39,6 @@ enum tshut_polarity {
 	TSHUT_HIGH_ACTIVE,
 };
 
-/*
- * The system has two Temperature Sensors.
- * sensor0 is for CPU, and sensor1 is for GPU.
- */
-enum sensor_id {
-	SENSOR_CPU = 0,
-	SENSOR_GPU,
-};
-
 /*
  * The conversion table has the adc value and temperature.
  * ADC_DECREMENT: the adc value is of diminishing.(e.g. rk3288_code_table)
@@ -82,7 +73,7 @@ struct chip_tsadc_table {
 
 /**
  * struct rockchip_tsadc_chip - hold the private data of tsadc chip
- * @chn_id: array of sensor ids of chip corresponding to the channel
+ * @chn_offset: the channel offset of the first channel
  * @chn_num: the channel number of tsadc chip
  * @tshut_temp: the hardware-controlled shutdown temperature value
  * @tshut_mode: the hardware-controlled shutdown mode (0:CRU 1:GPIO)
@@ -98,7 +89,7 @@ struct chip_tsadc_table {
  */
 struct rockchip_tsadc_chip {
 	/* The sensor id of chip correspond to the ADC channel */
-	int chn_id[SOC_MAX_SENSORS];
+	int chn_offset;
 	int chn_num;
 
 	/* The hardware-controlled tshut property */
@@ -925,8 +916,8 @@ static void rk_tsadcv2_tshut_mode(int chn, void __iomem *regs,
 }
 
 static const struct rockchip_tsadc_chip px30_tsadc_data = {
-	.chn_id[SENSOR_CPU] = 0, /* cpu sensor is channel 0 */
-	.chn_id[SENSOR_GPU] = 1, /* gpu sensor is channel 1 */
+	/* cpu, gpu */
+	.chn_offset = 0,
 	.chn_num = 2, /* 2 channels for tsadc */
 
 	.tshut_mode = TSHUT_MODE_CRU, /* default TSHUT via CRU */
@@ -949,7 +940,8 @@ static const struct rockchip_tsadc_chip px30_tsadc_data = {
 };
 
 static const struct rockchip_tsadc_chip rv1108_tsadc_data = {
-	.chn_id[SENSOR_CPU] = 0, /* cpu sensor is channel 0 */
+	/* cpu */
+	.chn_offset = 0,
 	.chn_num = 1, /* one channel for tsadc */
 
 	.tshut_mode = TSHUT_MODE_GPIO, /* default TSHUT via GPIO give PMIC */
@@ -973,7 +965,8 @@ static const struct rockchip_tsadc_chip rv1108_tsadc_data = {
 };
 
 static const struct rockchip_tsadc_chip rk3228_tsadc_data = {
-	.chn_id[SENSOR_CPU] = 0, /* cpu sensor is channel 0 */
+	/* cpu */
+	.chn_offset = 0,
 	.chn_num = 1, /* one channel for tsadc */
 
 	.tshut_mode = TSHUT_MODE_GPIO, /* default TSHUT via GPIO give PMIC */
@@ -997,8 +990,8 @@ static const struct rockchip_tsadc_chip rk3228_tsadc_data = {
 };
 
 static const struct rockchip_tsadc_chip rk3288_tsadc_data = {
-	.chn_id[SENSOR_CPU] = 1, /* cpu sensor is channel 1 */
-	.chn_id[SENSOR_GPU] = 2, /* gpu sensor is channel 2 */
+	/* cpu, gpu */
+	.chn_offset = 1,
 	.chn_num = 2, /* two channels for tsadc */
 
 	.tshut_mode = TSHUT_MODE_GPIO, /* default TSHUT via GPIO give PMIC */
@@ -1022,7 +1015,8 @@ static const struct rockchip_tsadc_chip rk3288_tsadc_data = {
 };
 
 static const struct rockchip_tsadc_chip rk3328_tsadc_data = {
-	.chn_id[SENSOR_CPU] = 0, /* cpu sensor is channel 0 */
+	/* cpu */
+	.chn_offset = 0,
 	.chn_num = 1, /* one channels for tsadc */
 
 	.tshut_mode = TSHUT_MODE_CRU, /* default TSHUT via CRU */
@@ -1045,8 +1039,8 @@ static const struct rockchip_tsadc_chip rk3328_tsadc_data = {
 };
 
 static const struct rockchip_tsadc_chip rk3366_tsadc_data = {
-	.chn_id[SENSOR_CPU] = 0, /* cpu sensor is channel 0 */
-	.chn_id[SENSOR_GPU] = 1, /* gpu sensor is channel 1 */
+	/* cpu, gpu */
+	.chn_offset = 0,
 	.chn_num = 2, /* two channels for tsadc */
 
 	.tshut_mode = TSHUT_MODE_GPIO, /* default TSHUT via GPIO give PMIC */
@@ -1070,8 +1064,8 @@ static const struct rockchip_tsadc_chip rk3366_tsadc_data = {
 };
 
 static const struct rockchip_tsadc_chip rk3368_tsadc_data = {
-	.chn_id[SENSOR_CPU] = 0, /* cpu sensor is channel 0 */
-	.chn_id[SENSOR_GPU] = 1, /* gpu sensor is channel 1 */
+	/* cpu, gpu */
+	.chn_offset = 0,
 	.chn_num = 2, /* two channels for tsadc */
 
 	.tshut_mode = TSHUT_MODE_GPIO, /* default TSHUT via GPIO give PMIC */
@@ -1095,8 +1089,8 @@ static const struct rockchip_tsadc_chip rk3368_tsadc_data = {
 };
 
 static const struct rockchip_tsadc_chip rk3399_tsadc_data = {
-	.chn_id[SENSOR_CPU] = 0, /* cpu sensor is channel 0 */
-	.chn_id[SENSOR_GPU] = 1, /* gpu sensor is channel 1 */
+	/* cpu, gpu */
+	.chn_offset = 0,
 	.chn_num = 2, /* two channels for tsadc */
 
 	.tshut_mode = TSHUT_MODE_GPIO, /* default TSHUT via GPIO give PMIC */
@@ -1120,8 +1114,8 @@ static const struct rockchip_tsadc_chip rk3399_tsadc_data = {
 };
 
 static const struct rockchip_tsadc_chip rk3568_tsadc_data = {
-	.chn_id[SENSOR_CPU] = 0, /* cpu sensor is channel 0 */
-	.chn_id[SENSOR_GPU] = 1, /* gpu sensor is channel 1 */
+	/* cpu, gpu */
+	.chn_offset = 0,
 	.chn_num = 2, /* two channels for tsadc */
 
 	.tshut_mode = TSHUT_MODE_GPIO, /* default TSHUT via GPIO give PMIC */
@@ -1404,7 +1398,7 @@ static int rockchip_thermal_probe(struct platform_device *pdev)
 	for (i = 0; i < thermal->chip->chn_num; i++) {
 		error = rockchip_thermal_register_sensor(pdev, thermal,
 						&thermal->sensors[i],
-						thermal->chip->chn_id[i]);
+						thermal->chip->chn_offset + i);
 		if (error)
 			return dev_err_probe(&pdev->dev, error,
 				"failed to register sensor[%d].\n", i);
-- 
2.39.2
Re: [RESEND] [PATCHv3 4/7] thermal: rockchip: Simplify channel id logic
Posted by Daniel Lezcano 2 years, 11 months ago 
On 08/03/2023 12:22, Sebastian Reichel wrote:
> Replace the channel ID lookup table by a simple offset, since
> the channel IDs are consecutive.
> 
> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>

As all the other patches are reviewed by Heiko, is the tag missing here?


> ---
>   drivers/thermal/rockchip_thermal.c | 48 +++++++++++++-----------------
>   1 file changed, 21 insertions(+), 27 deletions(-)
> 
> diff --git a/drivers/thermal/rockchip_thermal.c b/drivers/thermal/rockchip_thermal.c
> index 9ed45b318344..bcbdd618daae 100644
> --- a/drivers/thermal/rockchip_thermal.c
> +++ b/drivers/thermal/rockchip_thermal.c
> @@ -39,15 +39,6 @@ enum tshut_polarity {
>   	TSHUT_HIGH_ACTIVE,
>   };
>   
> -/*
> - * The system has two Temperature Sensors.
> - * sensor0 is for CPU, and sensor1 is for GPU.
> - */
> -enum sensor_id {
> -	SENSOR_CPU = 0,
> -	SENSOR_GPU,
> -};
> -
>   /*
>    * The conversion table has the adc value and temperature.
>    * ADC_DECREMENT: the adc value is of diminishing.(e.g. rk3288_code_table)
> @@ -82,7 +73,7 @@ struct chip_tsadc_table {
>   
>   /**
>    * struct rockchip_tsadc_chip - hold the private data of tsadc chip
> - * @chn_id: array of sensor ids of chip corresponding to the channel
> + * @chn_offset: the channel offset of the first channel
>    * @chn_num: the channel number of tsadc chip
>    * @tshut_temp: the hardware-controlled shutdown temperature value
>    * @tshut_mode: the hardware-controlled shutdown mode (0:CRU 1:GPIO)
> @@ -98,7 +89,7 @@ struct chip_tsadc_table {
>    */
>   struct rockchip_tsadc_chip {
>   	/* The sensor id of chip correspond to the ADC channel */
> -	int chn_id[SOC_MAX_SENSORS];
> +	int chn_offset;
>   	int chn_num;
>   
>   	/* The hardware-controlled tshut property */
> @@ -925,8 +916,8 @@ static void rk_tsadcv2_tshut_mode(int chn, void __iomem *regs,
>   }
>   
>   static const struct rockchip_tsadc_chip px30_tsadc_data = {
> -	.chn_id[SENSOR_CPU] = 0, /* cpu sensor is channel 0 */
> -	.chn_id[SENSOR_GPU] = 1, /* gpu sensor is channel 1 */
> +	/* cpu, gpu */
> +	.chn_offset = 0,
>   	.chn_num = 2, /* 2 channels for tsadc */
>   
>   	.tshut_mode = TSHUT_MODE_CRU, /* default TSHUT via CRU */
> @@ -949,7 +940,8 @@ static const struct rockchip_tsadc_chip px30_tsadc_data = {
>   };
>   
>   static const struct rockchip_tsadc_chip rv1108_tsadc_data = {
> -	.chn_id[SENSOR_CPU] = 0, /* cpu sensor is channel 0 */
> +	/* cpu */
> +	.chn_offset = 0,
>   	.chn_num = 1, /* one channel for tsadc */
>   
>   	.tshut_mode = TSHUT_MODE_GPIO, /* default TSHUT via GPIO give PMIC */
> @@ -973,7 +965,8 @@ static const struct rockchip_tsadc_chip rv1108_tsadc_data = {
>   };
>   
>   static const struct rockchip_tsadc_chip rk3228_tsadc_data = {
> -	.chn_id[SENSOR_CPU] = 0, /* cpu sensor is channel 0 */
> +	/* cpu */
> +	.chn_offset = 0,
>   	.chn_num = 1, /* one channel for tsadc */
>   
>   	.tshut_mode = TSHUT_MODE_GPIO, /* default TSHUT via GPIO give PMIC */
> @@ -997,8 +990,8 @@ static const struct rockchip_tsadc_chip rk3228_tsadc_data = {
>   };
>   
>   static const struct rockchip_tsadc_chip rk3288_tsadc_data = {
> -	.chn_id[SENSOR_CPU] = 1, /* cpu sensor is channel 1 */
> -	.chn_id[SENSOR_GPU] = 2, /* gpu sensor is channel 2 */
> +	/* cpu, gpu */
> +	.chn_offset = 1,
>   	.chn_num = 2, /* two channels for tsadc */
>   
>   	.tshut_mode = TSHUT_MODE_GPIO, /* default TSHUT via GPIO give PMIC */
> @@ -1022,7 +1015,8 @@ static const struct rockchip_tsadc_chip rk3288_tsadc_data = {
>   };
>   
>   static const struct rockchip_tsadc_chip rk3328_tsadc_data = {
> -	.chn_id[SENSOR_CPU] = 0, /* cpu sensor is channel 0 */
> +	/* cpu */
> +	.chn_offset = 0,
>   	.chn_num = 1, /* one channels for tsadc */
>   
>   	.tshut_mode = TSHUT_MODE_CRU, /* default TSHUT via CRU */
> @@ -1045,8 +1039,8 @@ static const struct rockchip_tsadc_chip rk3328_tsadc_data = {
>   };
>   
>   static const struct rockchip_tsadc_chip rk3366_tsadc_data = {
> -	.chn_id[SENSOR_CPU] = 0, /* cpu sensor is channel 0 */
> -	.chn_id[SENSOR_GPU] = 1, /* gpu sensor is channel 1 */
> +	/* cpu, gpu */
> +	.chn_offset = 0,
>   	.chn_num = 2, /* two channels for tsadc */
>   
>   	.tshut_mode = TSHUT_MODE_GPIO, /* default TSHUT via GPIO give PMIC */
> @@ -1070,8 +1064,8 @@ static const struct rockchip_tsadc_chip rk3366_tsadc_data = {
>   };
>   
>   static const struct rockchip_tsadc_chip rk3368_tsadc_data = {
> -	.chn_id[SENSOR_CPU] = 0, /* cpu sensor is channel 0 */
> -	.chn_id[SENSOR_GPU] = 1, /* gpu sensor is channel 1 */
> +	/* cpu, gpu */
> +	.chn_offset = 0,
>   	.chn_num = 2, /* two channels for tsadc */
>   
>   	.tshut_mode = TSHUT_MODE_GPIO, /* default TSHUT via GPIO give PMIC */
> @@ -1095,8 +1089,8 @@ static const struct rockchip_tsadc_chip rk3368_tsadc_data = {
>   };
>   
>   static const struct rockchip_tsadc_chip rk3399_tsadc_data = {
> -	.chn_id[SENSOR_CPU] = 0, /* cpu sensor is channel 0 */
> -	.chn_id[SENSOR_GPU] = 1, /* gpu sensor is channel 1 */
> +	/* cpu, gpu */
> +	.chn_offset = 0,
>   	.chn_num = 2, /* two channels for tsadc */
>   
>   	.tshut_mode = TSHUT_MODE_GPIO, /* default TSHUT via GPIO give PMIC */
> @@ -1120,8 +1114,8 @@ static const struct rockchip_tsadc_chip rk3399_tsadc_data = {
>   };
>   
>   static const struct rockchip_tsadc_chip rk3568_tsadc_data = {
> -	.chn_id[SENSOR_CPU] = 0, /* cpu sensor is channel 0 */
> -	.chn_id[SENSOR_GPU] = 1, /* gpu sensor is channel 1 */
> +	/* cpu, gpu */
> +	.chn_offset = 0,
>   	.chn_num = 2, /* two channels for tsadc */
>   
>   	.tshut_mode = TSHUT_MODE_GPIO, /* default TSHUT via GPIO give PMIC */
> @@ -1404,7 +1398,7 @@ static int rockchip_thermal_probe(struct platform_device *pdev)
>   	for (i = 0; i < thermal->chip->chn_num; i++) {
>   		error = rockchip_thermal_register_sensor(pdev, thermal,
>   						&thermal->sensors[i],
> -						thermal->chip->chn_id[i]);
> +						thermal->chip->chn_offset + i);
>   		if (error)
>   			return dev_err_probe(&pdev->dev, error,
>   				"failed to register sensor[%d].\n", i);

-- 
<http://www.linaro.org/> Linaro.org │ Open source software for ARM SoCs

Follow Linaro:  <http://www.facebook.com/pages/Linaro> Facebook |
<http://twitter.com/#!/linaroorg> Twitter |
<http://www.linaro.org/linaro-blog/> Blog
Re: [RESEND] [PATCHv3 4/7] thermal: rockchip: Simplify channel id logic
Posted by Sebastian Reichel 2 years, 11 months ago 
Hi Daniel,

On Wed, Mar 08, 2023 at 07:13:22PM +0100, Daniel Lezcano wrote:
> On 08/03/2023 12:22, Sebastian Reichel wrote:
> > Replace the channel ID lookup table by a simple offset, since
> > the channel IDs are consecutive.
> > 
> > Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
> 
> As all the other patches are reviewed by Heiko, is the tag missing here?

Heiko was not happy with this in PATCHv2, when he reviewed most
of the patches:

https://lore.kernel.org/all/3601039.e9J7NaK4W3@phil/

I replied, but never got a response, so I kept it as is:

https://lore.kernel.org/all/20221206170232.xsm4kcbfwrmlrriw@mercury.elektranox.org/

FWIW it is essential for the series and cannot be dropped, because
RK3588 has more than 2 channels.

Greetings,

-- Sebastian

> > ---
> >   drivers/thermal/rockchip_thermal.c | 48 +++++++++++++-----------------
> >   1 file changed, 21 insertions(+), 27 deletions(-)
> > 
> > diff --git a/drivers/thermal/rockchip_thermal.c b/drivers/thermal/rockchip_thermal.c
> > index 9ed45b318344..bcbdd618daae 100644
> > --- a/drivers/thermal/rockchip_thermal.c
> > +++ b/drivers/thermal/rockchip_thermal.c
> > @@ -39,15 +39,6 @@ enum tshut_polarity {
> >   	TSHUT_HIGH_ACTIVE,
> >   };
> > -/*
> > - * The system has two Temperature Sensors.
> > - * sensor0 is for CPU, and sensor1 is for GPU.
> > - */
> > -enum sensor_id {
> > -	SENSOR_CPU = 0,
> > -	SENSOR_GPU,
> > -};
> > -
> >   /*
> >    * The conversion table has the adc value and temperature.
> >    * ADC_DECREMENT: the adc value is of diminishing.(e.g. rk3288_code_table)
> > @@ -82,7 +73,7 @@ struct chip_tsadc_table {
> >   /**
> >    * struct rockchip_tsadc_chip - hold the private data of tsadc chip
> > - * @chn_id: array of sensor ids of chip corresponding to the channel
> > + * @chn_offset: the channel offset of the first channel
> >    * @chn_num: the channel number of tsadc chip
> >    * @tshut_temp: the hardware-controlled shutdown temperature value
> >    * @tshut_mode: the hardware-controlled shutdown mode (0:CRU 1:GPIO)
> > @@ -98,7 +89,7 @@ struct chip_tsadc_table {
> >    */
> >   struct rockchip_tsadc_chip {
> >   	/* The sensor id of chip correspond to the ADC channel */
> > -	int chn_id[SOC_MAX_SENSORS];
> > +	int chn_offset;
> >   	int chn_num;
> >   	/* The hardware-controlled tshut property */
> > @@ -925,8 +916,8 @@ static void rk_tsadcv2_tshut_mode(int chn, void __iomem *regs,
> >   }
> >   static const struct rockchip_tsadc_chip px30_tsadc_data = {
> > -	.chn_id[SENSOR_CPU] = 0, /* cpu sensor is channel 0 */
> > -	.chn_id[SENSOR_GPU] = 1, /* gpu sensor is channel 1 */
> > +	/* cpu, gpu */
> > +	.chn_offset = 0,
> >   	.chn_num = 2, /* 2 channels for tsadc */
> >   	.tshut_mode = TSHUT_MODE_CRU, /* default TSHUT via CRU */
> > @@ -949,7 +940,8 @@ static const struct rockchip_tsadc_chip px30_tsadc_data = {
> >   };
> >   static const struct rockchip_tsadc_chip rv1108_tsadc_data = {
> > -	.chn_id[SENSOR_CPU] = 0, /* cpu sensor is channel 0 */
> > +	/* cpu */
> > +	.chn_offset = 0,
> >   	.chn_num = 1, /* one channel for tsadc */
> >   	.tshut_mode = TSHUT_MODE_GPIO, /* default TSHUT via GPIO give PMIC */
> > @@ -973,7 +965,8 @@ static const struct rockchip_tsadc_chip rv1108_tsadc_data = {
> >   };
> >   static const struct rockchip_tsadc_chip rk3228_tsadc_data = {
> > -	.chn_id[SENSOR_CPU] = 0, /* cpu sensor is channel 0 */
> > +	/* cpu */
> > +	.chn_offset = 0,
> >   	.chn_num = 1, /* one channel for tsadc */
> >   	.tshut_mode = TSHUT_MODE_GPIO, /* default TSHUT via GPIO give PMIC */
> > @@ -997,8 +990,8 @@ static const struct rockchip_tsadc_chip rk3228_tsadc_data = {
> >   };
> >   static const struct rockchip_tsadc_chip rk3288_tsadc_data = {
> > -	.chn_id[SENSOR_CPU] = 1, /* cpu sensor is channel 1 */
> > -	.chn_id[SENSOR_GPU] = 2, /* gpu sensor is channel 2 */
> > +	/* cpu, gpu */
> > +	.chn_offset = 1,
> >   	.chn_num = 2, /* two channels for tsadc */
> >   	.tshut_mode = TSHUT_MODE_GPIO, /* default TSHUT via GPIO give PMIC */
> > @@ -1022,7 +1015,8 @@ static const struct rockchip_tsadc_chip rk3288_tsadc_data = {
> >   };
> >   static const struct rockchip_tsadc_chip rk3328_tsadc_data = {
> > -	.chn_id[SENSOR_CPU] = 0, /* cpu sensor is channel 0 */
> > +	/* cpu */
> > +	.chn_offset = 0,
> >   	.chn_num = 1, /* one channels for tsadc */
> >   	.tshut_mode = TSHUT_MODE_CRU, /* default TSHUT via CRU */
> > @@ -1045,8 +1039,8 @@ static const struct rockchip_tsadc_chip rk3328_tsadc_data = {
> >   };
> >   static const struct rockchip_tsadc_chip rk3366_tsadc_data = {
> > -	.chn_id[SENSOR_CPU] = 0, /* cpu sensor is channel 0 */
> > -	.chn_id[SENSOR_GPU] = 1, /* gpu sensor is channel 1 */
> > +	/* cpu, gpu */
> > +	.chn_offset = 0,
> >   	.chn_num = 2, /* two channels for tsadc */
> >   	.tshut_mode = TSHUT_MODE_GPIO, /* default TSHUT via GPIO give PMIC */
> > @@ -1070,8 +1064,8 @@ static const struct rockchip_tsadc_chip rk3366_tsadc_data = {
> >   };
> >   static const struct rockchip_tsadc_chip rk3368_tsadc_data = {
> > -	.chn_id[SENSOR_CPU] = 0, /* cpu sensor is channel 0 */
> > -	.chn_id[SENSOR_GPU] = 1, /* gpu sensor is channel 1 */
> > +	/* cpu, gpu */
> > +	.chn_offset = 0,
> >   	.chn_num = 2, /* two channels for tsadc */
> >   	.tshut_mode = TSHUT_MODE_GPIO, /* default TSHUT via GPIO give PMIC */
> > @@ -1095,8 +1089,8 @@ static const struct rockchip_tsadc_chip rk3368_tsadc_data = {
> >   };
> >   static const struct rockchip_tsadc_chip rk3399_tsadc_data = {
> > -	.chn_id[SENSOR_CPU] = 0, /* cpu sensor is channel 0 */
> > -	.chn_id[SENSOR_GPU] = 1, /* gpu sensor is channel 1 */
> > +	/* cpu, gpu */
> > +	.chn_offset = 0,
> >   	.chn_num = 2, /* two channels for tsadc */
> >   	.tshut_mode = TSHUT_MODE_GPIO, /* default TSHUT via GPIO give PMIC */
> > @@ -1120,8 +1114,8 @@ static const struct rockchip_tsadc_chip rk3399_tsadc_data = {
> >   };
> >   static const struct rockchip_tsadc_chip rk3568_tsadc_data = {
> > -	.chn_id[SENSOR_CPU] = 0, /* cpu sensor is channel 0 */
> > -	.chn_id[SENSOR_GPU] = 1, /* gpu sensor is channel 1 */
> > +	/* cpu, gpu */
> > +	.chn_offset = 0,
> >   	.chn_num = 2, /* two channels for tsadc */
> >   	.tshut_mode = TSHUT_MODE_GPIO, /* default TSHUT via GPIO give PMIC */
> > @@ -1404,7 +1398,7 @@ static int rockchip_thermal_probe(struct platform_device *pdev)
> >   	for (i = 0; i < thermal->chip->chn_num; i++) {
> >   		error = rockchip_thermal_register_sensor(pdev, thermal,
> >   						&thermal->sensors[i],
> > -						thermal->chip->chn_id[i]);
> > +						thermal->chip->chn_offset + i);
> >   		if (error)
> >   			return dev_err_probe(&pdev->dev, error,
> >   				"failed to register sensor[%d].\n", i);
> 
> -- 
> <http://www.linaro.org/> Linaro.org │ Open source software for ARM SoCs
> 
> Follow Linaro:  <http://www.facebook.com/pages/Linaro> Facebook |
> <http://twitter.com/#!/linaroorg> Twitter |
> <http://www.linaro.org/linaro-blog/> Blog
>
Re: [RESEND] [PATCHv3 4/7] thermal: rockchip: Simplify channel id logic
Posted by Daniel Lezcano 2 years, 11 months ago 
Hi Heiko,

On 08/03/2023 19:42, Sebastian Reichel wrote:
> Hi Daniel,
> 
> On Wed, Mar 08, 2023 at 07:13:22PM +0100, Daniel Lezcano wrote:
>> On 08/03/2023 12:22, Sebastian Reichel wrote:
>>> Replace the channel ID lookup table by a simple offset, since
>>> the channel IDs are consecutive.
>>>
>>> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
>>
>> As all the other patches are reviewed by Heiko, is the tag missing here?
> 
> Heiko was not happy with this in PATCHv2, when he reviewed most
> of the patches:
> 
> https://lore.kernel.org/all/3601039.e9J7NaK4W3@phil/
> 
> I replied, but never got a response, so I kept it as is:
> 
> https://lore.kernel.org/all/20221206170232.xsm4kcbfwrmlrriw@mercury.elektranox.org/
> 
> FWIW it is essential for the series and cannot be dropped, because
> RK3588 has more than 2 channels.

Do you have a suggestion to improve the proposed change ?

Thanks
    -- Daniel


>>> ---
>>>    drivers/thermal/rockchip_thermal.c | 48 +++++++++++++-----------------
>>>    1 file changed, 21 insertions(+), 27 deletions(-)
>>>
>>> diff --git a/drivers/thermal/rockchip_thermal.c b/drivers/thermal/rockchip_thermal.c
>>> index 9ed45b318344..bcbdd618daae 100644
>>> --- a/drivers/thermal/rockchip_thermal.c
>>> +++ b/drivers/thermal/rockchip_thermal.c
>>> @@ -39,15 +39,6 @@ enum tshut_polarity {
>>>    	TSHUT_HIGH_ACTIVE,
>>>    };
>>> -/*
>>> - * The system has two Temperature Sensors.
>>> - * sensor0 is for CPU, and sensor1 is for GPU.
>>> - */
>>> -enum sensor_id {
>>> -	SENSOR_CPU = 0,
>>> -	SENSOR_GPU,
>>> -};
>>> -
>>>    /*
>>>     * The conversion table has the adc value and temperature.
>>>     * ADC_DECREMENT: the adc value is of diminishing.(e.g. rk3288_code_table)
>>> @@ -82,7 +73,7 @@ struct chip_tsadc_table {
>>>    /**
>>>     * struct rockchip_tsadc_chip - hold the private data of tsadc chip
>>> - * @chn_id: array of sensor ids of chip corresponding to the channel
>>> + * @chn_offset: the channel offset of the first channel
>>>     * @chn_num: the channel number of tsadc chip
>>>     * @tshut_temp: the hardware-controlled shutdown temperature value
>>>     * @tshut_mode: the hardware-controlled shutdown mode (0:CRU 1:GPIO)
>>> @@ -98,7 +89,7 @@ struct chip_tsadc_table {
>>>     */
>>>    struct rockchip_tsadc_chip {
>>>    	/* The sensor id of chip correspond to the ADC channel */
>>> -	int chn_id[SOC_MAX_SENSORS];
>>> +	int chn_offset;
>>>    	int chn_num;
>>>    	/* The hardware-controlled tshut property */
>>> @@ -925,8 +916,8 @@ static void rk_tsadcv2_tshut_mode(int chn, void __iomem *regs,
>>>    }
>>>    static const struct rockchip_tsadc_chip px30_tsadc_data = {
>>> -	.chn_id[SENSOR_CPU] = 0, /* cpu sensor is channel 0 */
>>> -	.chn_id[SENSOR_GPU] = 1, /* gpu sensor is channel 1 */
>>> +	/* cpu, gpu */
>>> +	.chn_offset = 0,
>>>    	.chn_num = 2, /* 2 channels for tsadc */
>>>    	.tshut_mode = TSHUT_MODE_CRU, /* default TSHUT via CRU */
>>> @@ -949,7 +940,8 @@ static const struct rockchip_tsadc_chip px30_tsadc_data = {
>>>    };
>>>    static const struct rockchip_tsadc_chip rv1108_tsadc_data = {
>>> -	.chn_id[SENSOR_CPU] = 0, /* cpu sensor is channel 0 */
>>> +	/* cpu */
>>> +	.chn_offset = 0,
>>>    	.chn_num = 1, /* one channel for tsadc */
>>>    	.tshut_mode = TSHUT_MODE_GPIO, /* default TSHUT via GPIO give PMIC */
>>> @@ -973,7 +965,8 @@ static const struct rockchip_tsadc_chip rv1108_tsadc_data = {
>>>    };
>>>    static const struct rockchip_tsadc_chip rk3228_tsadc_data = {
>>> -	.chn_id[SENSOR_CPU] = 0, /* cpu sensor is channel 0 */
>>> +	/* cpu */
>>> +	.chn_offset = 0,
>>>    	.chn_num = 1, /* one channel for tsadc */
>>>    	.tshut_mode = TSHUT_MODE_GPIO, /* default TSHUT via GPIO give PMIC */
>>> @@ -997,8 +990,8 @@ static const struct rockchip_tsadc_chip rk3228_tsadc_data = {
>>>    };
>>>    static const struct rockchip_tsadc_chip rk3288_tsadc_data = {
>>> -	.chn_id[SENSOR_CPU] = 1, /* cpu sensor is channel 1 */
>>> -	.chn_id[SENSOR_GPU] = 2, /* gpu sensor is channel 2 */
>>> +	/* cpu, gpu */
>>> +	.chn_offset = 1,
>>>    	.chn_num = 2, /* two channels for tsadc */
>>>    	.tshut_mode = TSHUT_MODE_GPIO, /* default TSHUT via GPIO give PMIC */
>>> @@ -1022,7 +1015,8 @@ static const struct rockchip_tsadc_chip rk3288_tsadc_data = {
>>>    };
>>>    static const struct rockchip_tsadc_chip rk3328_tsadc_data = {
>>> -	.chn_id[SENSOR_CPU] = 0, /* cpu sensor is channel 0 */
>>> +	/* cpu */
>>> +	.chn_offset = 0,
>>>    	.chn_num = 1, /* one channels for tsadc */
>>>    	.tshut_mode = TSHUT_MODE_CRU, /* default TSHUT via CRU */
>>> @@ -1045,8 +1039,8 @@ static const struct rockchip_tsadc_chip rk3328_tsadc_data = {
>>>    };
>>>    static const struct rockchip_tsadc_chip rk3366_tsadc_data = {
>>> -	.chn_id[SENSOR_CPU] = 0, /* cpu sensor is channel 0 */
>>> -	.chn_id[SENSOR_GPU] = 1, /* gpu sensor is channel 1 */
>>> +	/* cpu, gpu */
>>> +	.chn_offset = 0,
>>>    	.chn_num = 2, /* two channels for tsadc */
>>>    	.tshut_mode = TSHUT_MODE_GPIO, /* default TSHUT via GPIO give PMIC */
>>> @@ -1070,8 +1064,8 @@ static const struct rockchip_tsadc_chip rk3366_tsadc_data = {
>>>    };
>>>    static const struct rockchip_tsadc_chip rk3368_tsadc_data = {
>>> -	.chn_id[SENSOR_CPU] = 0, /* cpu sensor is channel 0 */
>>> -	.chn_id[SENSOR_GPU] = 1, /* gpu sensor is channel 1 */
>>> +	/* cpu, gpu */
>>> +	.chn_offset = 0,
>>>    	.chn_num = 2, /* two channels for tsadc */
>>>    	.tshut_mode = TSHUT_MODE_GPIO, /* default TSHUT via GPIO give PMIC */
>>> @@ -1095,8 +1089,8 @@ static const struct rockchip_tsadc_chip rk3368_tsadc_data = {
>>>    };
>>>    static const struct rockchip_tsadc_chip rk3399_tsadc_data = {
>>> -	.chn_id[SENSOR_CPU] = 0, /* cpu sensor is channel 0 */
>>> -	.chn_id[SENSOR_GPU] = 1, /* gpu sensor is channel 1 */
>>> +	/* cpu, gpu */
>>> +	.chn_offset = 0,
>>>    	.chn_num = 2, /* two channels for tsadc */
>>>    	.tshut_mode = TSHUT_MODE_GPIO, /* default TSHUT via GPIO give PMIC */
>>> @@ -1120,8 +1114,8 @@ static const struct rockchip_tsadc_chip rk3399_tsadc_data = {
>>>    };
>>>    static const struct rockchip_tsadc_chip rk3568_tsadc_data = {
>>> -	.chn_id[SENSOR_CPU] = 0, /* cpu sensor is channel 0 */
>>> -	.chn_id[SENSOR_GPU] = 1, /* gpu sensor is channel 1 */
>>> +	/* cpu, gpu */
>>> +	.chn_offset = 0,
>>>    	.chn_num = 2, /* two channels for tsadc */
>>>    	.tshut_mode = TSHUT_MODE_GPIO, /* default TSHUT via GPIO give PMIC */
>>> @@ -1404,7 +1398,7 @@ static int rockchip_thermal_probe(struct platform_device *pdev)
>>>    	for (i = 0; i < thermal->chip->chn_num; i++) {
>>>    		error = rockchip_thermal_register_sensor(pdev, thermal,
>>>    						&thermal->sensors[i],
>>> -						thermal->chip->chn_id[i]);
>>> +						thermal->chip->chn_offset + i);
>>>    		if (error)
>>>    			return dev_err_probe(&pdev->dev, error,
>>>    				"failed to register sensor[%d].\n", i);
>>
>> -- 
>> <http://www.linaro.org/> Linaro.org │ Open source software for ARM SoCs
>>
>> Follow Linaro:  <http://www.facebook.com/pages/Linaro> Facebook |
>> <http://twitter.com/#!/linaroorg> Twitter |
>> <http://www.linaro.org/linaro-blog/> Blog
>>

-- 
<http://www.linaro.org/> Linaro.org │ Open source software for ARM SoCs

Follow Linaro:  <http://www.facebook.com/pages/Linaro> Facebook |
<http://twitter.com/#!/linaroorg> Twitter |
<http://www.linaro.org/linaro-blog/> Blog
Re: [RESEND] [PATCHv3 4/7] thermal: rockchip: Simplify channel id logic
Posted by Heiko Stübner 2 years, 10 months ago 
Am Donnerstag, 16. März 2023, 11:05:25 CEST schrieb Daniel Lezcano:
> 
> Hi Heiko,
> 
> On 08/03/2023 19:42, Sebastian Reichel wrote:
> > Hi Daniel,
> > 
> > On Wed, Mar 08, 2023 at 07:13:22PM +0100, Daniel Lezcano wrote:
> >> On 08/03/2023 12:22, Sebastian Reichel wrote:
> >>> Replace the channel ID lookup table by a simple offset, since
> >>> the channel IDs are consecutive.
> >>>
> >>> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
> >>
> >> As all the other patches are reviewed by Heiko, is the tag missing here?
> > 
> > Heiko was not happy with this in PATCHv2, when he reviewed most
> > of the patches:
> > 
> > https://lore.kernel.org/all/3601039.e9J7NaK4W3@phil/
> > 
> > I replied, but never got a response, so I kept it as is:
> > 
> > https://lore.kernel.org/all/20221206170232.xsm4kcbfwrmlrriw@mercury.elektranox.org/
> > 
> > FWIW it is essential for the series and cannot be dropped, because
> > RK3588 has more than 2 channels.
> 
> Do you have a suggestion to improve the proposed change ?

I guess it's fine after all.

Sebastian's response makes sense and there is not really a reason to keep
infrastructure around for a hypothetical case that may never happen.

If that really changes with some SoC in the far future we can always
re-evaluate.


So,

Reviewed-by: Heiko Stuebner <heiko@sntech.de>

Sorry for dropping the ball on this
Heiko


> >>> ---
> >>>    drivers/thermal/rockchip_thermal.c | 48 +++++++++++++-----------------
> >>>    1 file changed, 21 insertions(+), 27 deletions(-)
> >>>
> >>> diff --git a/drivers/thermal/rockchip_thermal.c b/drivers/thermal/rockchip_thermal.c
> >>> index 9ed45b318344..bcbdd618daae 100644
> >>> --- a/drivers/thermal/rockchip_thermal.c
> >>> +++ b/drivers/thermal/rockchip_thermal.c
> >>> @@ -39,15 +39,6 @@ enum tshut_polarity {
> >>>    	TSHUT_HIGH_ACTIVE,
> >>>    };
> >>> -/*
> >>> - * The system has two Temperature Sensors.
> >>> - * sensor0 is for CPU, and sensor1 is for GPU.
> >>> - */
> >>> -enum sensor_id {
> >>> -	SENSOR_CPU = 0,
> >>> -	SENSOR_GPU,
> >>> -};
> >>> -
> >>>    /*
> >>>     * The conversion table has the adc value and temperature.
> >>>     * ADC_DECREMENT: the adc value is of diminishing.(e.g. rk3288_code_table)
> >>> @@ -82,7 +73,7 @@ struct chip_tsadc_table {
> >>>    /**
> >>>     * struct rockchip_tsadc_chip - hold the private data of tsadc chip
> >>> - * @chn_id: array of sensor ids of chip corresponding to the channel
> >>> + * @chn_offset: the channel offset of the first channel
> >>>     * @chn_num: the channel number of tsadc chip
> >>>     * @tshut_temp: the hardware-controlled shutdown temperature value
> >>>     * @tshut_mode: the hardware-controlled shutdown mode (0:CRU 1:GPIO)
> >>> @@ -98,7 +89,7 @@ struct chip_tsadc_table {
> >>>     */
> >>>    struct rockchip_tsadc_chip {
> >>>    	/* The sensor id of chip correspond to the ADC channel */
> >>> -	int chn_id[SOC_MAX_SENSORS];
> >>> +	int chn_offset;
> >>>    	int chn_num;
> >>>    	/* The hardware-controlled tshut property */
> >>> @@ -925,8 +916,8 @@ static void rk_tsadcv2_tshut_mode(int chn, void __iomem *regs,
> >>>    }
> >>>    static const struct rockchip_tsadc_chip px30_tsadc_data = {
> >>> -	.chn_id[SENSOR_CPU] = 0, /* cpu sensor is channel 0 */
> >>> -	.chn_id[SENSOR_GPU] = 1, /* gpu sensor is channel 1 */
> >>> +	/* cpu, gpu */
> >>> +	.chn_offset = 0,
> >>>    	.chn_num = 2, /* 2 channels for tsadc */
> >>>    	.tshut_mode = TSHUT_MODE_CRU, /* default TSHUT via CRU */
> >>> @@ -949,7 +940,8 @@ static const struct rockchip_tsadc_chip px30_tsadc_data = {
> >>>    };
> >>>    static const struct rockchip_tsadc_chip rv1108_tsadc_data = {
> >>> -	.chn_id[SENSOR_CPU] = 0, /* cpu sensor is channel 0 */
> >>> +	/* cpu */
> >>> +	.chn_offset = 0,
> >>>    	.chn_num = 1, /* one channel for tsadc */
> >>>    	.tshut_mode = TSHUT_MODE_GPIO, /* default TSHUT via GPIO give PMIC */
> >>> @@ -973,7 +965,8 @@ static const struct rockchip_tsadc_chip rv1108_tsadc_data = {
> >>>    };
> >>>    static const struct rockchip_tsadc_chip rk3228_tsadc_data = {
> >>> -	.chn_id[SENSOR_CPU] = 0, /* cpu sensor is channel 0 */
> >>> +	/* cpu */
> >>> +	.chn_offset = 0,
> >>>    	.chn_num = 1, /* one channel for tsadc */
> >>>    	.tshut_mode = TSHUT_MODE_GPIO, /* default TSHUT via GPIO give PMIC */
> >>> @@ -997,8 +990,8 @@ static const struct rockchip_tsadc_chip rk3228_tsadc_data = {
> >>>    };
> >>>    static const struct rockchip_tsadc_chip rk3288_tsadc_data = {
> >>> -	.chn_id[SENSOR_CPU] = 1, /* cpu sensor is channel 1 */
> >>> -	.chn_id[SENSOR_GPU] = 2, /* gpu sensor is channel 2 */
> >>> +	/* cpu, gpu */
> >>> +	.chn_offset = 1,
> >>>    	.chn_num = 2, /* two channels for tsadc */
> >>>    	.tshut_mode = TSHUT_MODE_GPIO, /* default TSHUT via GPIO give PMIC */
> >>> @@ -1022,7 +1015,8 @@ static const struct rockchip_tsadc_chip rk3288_tsadc_data = {
> >>>    };
> >>>    static const struct rockchip_tsadc_chip rk3328_tsadc_data = {
> >>> -	.chn_id[SENSOR_CPU] = 0, /* cpu sensor is channel 0 */
> >>> +	/* cpu */
> >>> +	.chn_offset = 0,
> >>>    	.chn_num = 1, /* one channels for tsadc */
> >>>    	.tshut_mode = TSHUT_MODE_CRU, /* default TSHUT via CRU */
> >>> @@ -1045,8 +1039,8 @@ static const struct rockchip_tsadc_chip rk3328_tsadc_data = {
> >>>    };
> >>>    static const struct rockchip_tsadc_chip rk3366_tsadc_data = {
> >>> -	.chn_id[SENSOR_CPU] = 0, /* cpu sensor is channel 0 */
> >>> -	.chn_id[SENSOR_GPU] = 1, /* gpu sensor is channel 1 */
> >>> +	/* cpu, gpu */
> >>> +	.chn_offset = 0,
> >>>    	.chn_num = 2, /* two channels for tsadc */
> >>>    	.tshut_mode = TSHUT_MODE_GPIO, /* default TSHUT via GPIO give PMIC */
> >>> @@ -1070,8 +1064,8 @@ static const struct rockchip_tsadc_chip rk3366_tsadc_data = {
> >>>    };
> >>>    static const struct rockchip_tsadc_chip rk3368_tsadc_data = {
> >>> -	.chn_id[SENSOR_CPU] = 0, /* cpu sensor is channel 0 */
> >>> -	.chn_id[SENSOR_GPU] = 1, /* gpu sensor is channel 1 */
> >>> +	/* cpu, gpu */
> >>> +	.chn_offset = 0,
> >>>    	.chn_num = 2, /* two channels for tsadc */
> >>>    	.tshut_mode = TSHUT_MODE_GPIO, /* default TSHUT via GPIO give PMIC */
> >>> @@ -1095,8 +1089,8 @@ static const struct rockchip_tsadc_chip rk3368_tsadc_data = {
> >>>    };
> >>>    static const struct rockchip_tsadc_chip rk3399_tsadc_data = {
> >>> -	.chn_id[SENSOR_CPU] = 0, /* cpu sensor is channel 0 */
> >>> -	.chn_id[SENSOR_GPU] = 1, /* gpu sensor is channel 1 */
> >>> +	/* cpu, gpu */
> >>> +	.chn_offset = 0,
> >>>    	.chn_num = 2, /* two channels for tsadc */
> >>>    	.tshut_mode = TSHUT_MODE_GPIO, /* default TSHUT via GPIO give PMIC */
> >>> @@ -1120,8 +1114,8 @@ static const struct rockchip_tsadc_chip rk3399_tsadc_data = {
> >>>    };
> >>>    static const struct rockchip_tsadc_chip rk3568_tsadc_data = {
> >>> -	.chn_id[SENSOR_CPU] = 0, /* cpu sensor is channel 0 */
> >>> -	.chn_id[SENSOR_GPU] = 1, /* gpu sensor is channel 1 */
> >>> +	/* cpu, gpu */
> >>> +	.chn_offset = 0,
> >>>    	.chn_num = 2, /* two channels for tsadc */
> >>>    	.tshut_mode = TSHUT_MODE_GPIO, /* default TSHUT via GPIO give PMIC */
> >>> @@ -1404,7 +1398,7 @@ static int rockchip_thermal_probe(struct platform_device *pdev)
> >>>    	for (i = 0; i < thermal->chip->chn_num; i++) {
> >>>    		error = rockchip_thermal_register_sensor(pdev, thermal,
> >>>    						&thermal->sensors[i],
> >>> -						thermal->chip->chn_id[i]);
> >>> +						thermal->chip->chn_offset + i);
> >>>    		if (error)
> >>>    			return dev_err_probe(&pdev->dev, error,
> >>>    				"failed to register sensor[%d].\n", i);
> >>
> >>
> >> Follow Linaro:  <http://www.facebook.com/pages/Linaro> Facebook |
> >> <http://twitter.com/#!/linaroorg> Twitter |
> >> <http://www.linaro.org/linaro-blog/> Blog
> >>
> 
>
Re: [RESEND] [PATCHv3 4/7] thermal: rockchip: Simplify channel id logic
Posted by Daniel Lezcano 2 years, 10 months ago 
On 30/03/2023 19:07, Heiko Stübner wrote:
> Am Donnerstag, 16. März 2023, 11:05:25 CEST schrieb Daniel Lezcano:
>>
>> Hi Heiko,
>>
>> On 08/03/2023 19:42, Sebastian Reichel wrote:
>>> Hi Daniel,
>>>
>>> On Wed, Mar 08, 2023 at 07:13:22PM +0100, Daniel Lezcano wrote:
>>>> On 08/03/2023 12:22, Sebastian Reichel wrote:
>>>>> Replace the channel ID lookup table by a simple offset, since
>>>>> the channel IDs are consecutive.
>>>>>
>>>>> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
>>>>
>>>> As all the other patches are reviewed by Heiko, is the tag missing here?
>>>
>>> Heiko was not happy with this in PATCHv2, when he reviewed most
>>> of the patches:
>>>
>>> https://lore.kernel.org/all/3601039.e9J7NaK4W3@phil/
>>>
>>> I replied, but never got a response, so I kept it as is:
>>>
>>> https://lore.kernel.org/all/20221206170232.xsm4kcbfwrmlrriw@mercury.elektranox.org/
>>>
>>> FWIW it is essential for the series and cannot be dropped, because
>>> RK3588 has more than 2 channels.
>>
>> Do you have a suggestion to improve the proposed change ?
> 
> I guess it's fine after all.
> 
> Sebastian's response makes sense and there is not really a reason to keep
> infrastructure around for a hypothetical case that may never happen.
> 
> If that really changes with some SoC in the far future we can always
> re-evaluate.

Thanks, I've added your tag


-- 
<http://www.linaro.org/> Linaro.org │ Open source software for ARM SoCs

Follow Linaro:  <http://www.facebook.com/pages/Linaro> Facebook |
<http://twitter.com/#!/linaroorg> Twitter |
<http://www.linaro.org/linaro-blog/> Blog

Patchew 2.1-devel-b67e4c2

© 2016 - 2026 Red Hat, Inc.