In preparation for supporting keepalive clocks which can never be shut off
(as the platform would fall apart otherwise), make the
DEFINE_CLK_SMD_RPM_BRANCH_A macro accept clock flags for the active-only
clock.

Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
---
 drivers/clk/qcom/clk-smd-rpm.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/clk/qcom/clk-smd-rpm.c b/drivers/clk/qcom/clk-smd-rpm.c
index 72b1f010509b..fec6ae4a8989 100644
--- a/drivers/clk/qcom/clk-smd-rpm.c
+++ b/drivers/clk/qcom/clk-smd-rpm.c
@@ -129,10 +129,10 @@
 		_name##_clk, _name##_a_clk,				      \
 		type, r_id, r, QCOM_RPM_SMD_KEY_ENABLE, 0)
 
-#define DEFINE_CLK_SMD_RPM_BRANCH_A(_name, type, r_id, r)		      \
+#define DEFINE_CLK_SMD_RPM_BRANCH_A(_name, type, r_id, r, ao_flags)	      \
 		__DEFINE_CLK_SMD_RPM_BRANCH_PREFIX(branch_,		      \
 		_name, _name##_a, type,					      \
-		r_id, r, QCOM_RPM_SMD_KEY_ENABLE, 0)
+		r_id, r, QCOM_RPM_SMD_KEY_ENABLE, ao_flags)
 
 #define DEFINE_CLK_SMD_RPM_QDSS(_name, type, r_id)			      \
 		__DEFINE_CLK_SMD_RPM(_name##_clk, _name##_a_clk,	      \
@@ -450,10 +450,10 @@ static const struct clk_ops clk_smd_rpm_branch_ops = {
 	.is_prepared	= clk_smd_rpm_is_enabled,
 };
 
-DEFINE_CLK_SMD_RPM_BRANCH_A(bi_tcxo, QCOM_SMD_RPM_MISC_CLK, 0, 19200000);
+DEFINE_CLK_SMD_RPM_BRANCH_A(bi_tcxo, QCOM_SMD_RPM_MISC_CLK, 0, 19200000, 0);
 DEFINE_CLK_SMD_RPM_BRANCH(qdss, QCOM_SMD_RPM_MISC_CLK, 1, 19200000);
 DEFINE_CLK_SMD_RPM_QDSS(qdss, QCOM_SMD_RPM_MISC_CLK, 1);
-DEFINE_CLK_SMD_RPM_BRANCH_A(bimc_freq_log, QCOM_SMD_RPM_MISC_CLK, 4, 1);
+DEFINE_CLK_SMD_RPM_BRANCH_A(bimc_freq_log, QCOM_SMD_RPM_MISC_CLK, 4, 1, 0);
 
 DEFINE_CLK_SMD_RPM_BRANCH(mss_cfg_ahb, QCOM_SMD_RPM_MCFG_CLK, 0, 19200000);
 

-- 
2.39.2

On 08/03/2023 23:35, Konrad Dybcio wrote:
> In preparation for supporting keepalive clocks which can never be shut off
> (as the platform would fall apart otherwise), make the
> DEFINE_CLK_SMD_RPM_BRANCH_A macro accept clock flags for the active-only
> clock.
> 
> Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
> ---
>   drivers/clk/qcom/clk-smd-rpm.c | 8 ++++----
>   1 file changed, 4 insertions(+), 4 deletions(-)

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

-- 
With best wishes
Dmitry