Qcom: Fix PCI I/O range defined in devicetree

[PATCH 09/16] arm64: dts: qcom: qcs404: Use 0x prefix for the PCI I/O and MEM ranges

Posted by Manivannan Sadhasivam 2 years, 9 months ago

To maintain the uniformity, let's use the 0x prefix for the values of
ranges property.

Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
---
 arch/arm64/boot/dts/qcom/qcs404.dtsi | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/qcs404.dtsi b/arch/arm64/boot/dts/qcom/qcs404.dtsi
index bc2ed73afb74..42fc33ab8b2e 100644
--- a/arch/arm64/boot/dts/qcom/qcs404.dtsi
+++ b/arch/arm64/boot/dts/qcom/qcs404.dtsi
@@ -1469,8 +1469,8 @@ pcie: pci@10000000 {
 			#address-cells = <3>;
 			#size-cells = <2>;
 
-			ranges = <0x81000000 0 0          0x10003000 0 0x00010000>, /* I/O */
-				 <0x82000000 0 0x10013000 0x10013000 0 0x007ed000>; /* memory */
+			ranges = <0x81000000 0x0 0x00000000 0x10003000 0x0 0x00010000>, /* I/O */
+				 <0x82000000 0x0 0x10013000 0x10013000 0x0 0x007ed000>; /* memory */
 
 			interrupts = <GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "msi";
-- 
2.25.1