1. Patchew
  2. linux
  3. View series

[PATCH] dmaengine: ti: add null check of devm_kasprintf in edma_probe and udma_probe

Kang Chen posted 1 patch 2 years, 6 months ago 
drivers/dma/ti/edma.c    | 8 ++++++++
drivers/dma/ti/k3-udma.c | 2 ++
2 files changed, 10 insertions(+)
[PATCH] dmaengine: ti: add null check of devm_kasprintf in edma_probe and udma_probe
Posted by Kang Chen 2 years, 6 months ago 
devm_kasprintf may fails, irq_name and uc->name might be null and wrong irq
name will be used in request.

Signed-off-by: Kang Chen <void0red@gmail.com>
---
 drivers/dma/ti/edma.c    | 8 ++++++++
 drivers/dma/ti/k3-udma.c | 2 ++
 2 files changed, 10 insertions(+)

diff --git a/drivers/dma/ti/edma.c b/drivers/dma/ti/edma.c
index fa06d7e6d..85cd72b64 100644
--- a/drivers/dma/ti/edma.c
+++ b/drivers/dma/ti/edma.c
@@ -2413,6 +2413,10 @@ static int edma_probe(struct platform_device *pdev)
 	if (irq >= 0) {
 		irq_name = devm_kasprintf(dev, GFP_KERNEL, "%s_ccint",
 					  dev_name(dev));
+		if (!irq_name) {
+			ret = -ENOMEM;
+			goto err_disable_pm;
+		}
 		ret = devm_request_irq(dev, irq, dma_irq_handler, 0, irq_name,
 				       ecc);
 		if (ret) {
@@ -2429,6 +2433,10 @@ static int edma_probe(struct platform_device *pdev)
 	if (irq >= 0) {
 		irq_name = devm_kasprintf(dev, GFP_KERNEL, "%s_ccerrint",
 					  dev_name(dev));
+		if (!irq_name) {
+			ret = -ENOMEM;
+			goto err_disable_pm;
+		}
 		ret = devm_request_irq(dev, irq, dma_ccerr_handler, 0, irq_name,
 				       ecc);
 		if (ret) {
diff --git a/drivers/dma/ti/k3-udma.c b/drivers/dma/ti/k3-udma.c
index 7e23a6fde..692d1d25c 100644
--- a/drivers/dma/ti/k3-udma.c
+++ b/drivers/dma/ti/k3-udma.c
@@ -5494,6 +5494,8 @@ static int udma_probe(struct platform_device *pdev)
 		uc->config.dir = DMA_MEM_TO_MEM;
 		uc->name = devm_kasprintf(dev, GFP_KERNEL, "%s chan%d",
 					  dev_name(dev), i);
+		if (!uc->name)
+			return -ENOMEM;
 
 		vchan_init(&uc->vc, &ud->ddev);
 		/* Use custom vchan completion handling */
-- 
2.34.1
Re: [PATCH] dmaengine: ti: add null check of devm_kasprintf in edma_probe and udma_probe
Posted by Péter Ujfalusi 2 years, 5 months ago 
Hi,

On 26/02/2023 11:40, Kang Chen wrote:
> devm_kasprintf may fails, irq_name and uc->name might be null and wrong irq
> name will be used in request.

In general, I would have preferred to have separate patches for the two 
drivers to make them easier to backport if one decides.

If you decide to resend, you can add my to them:

Acked-by: Peter Ujfalusi <peter.ujfalusi@gmail.com>

> 
> Signed-off-by: Kang Chen <void0red@gmail.com>
> ---
>   drivers/dma/ti/edma.c    | 8 ++++++++
>   drivers/dma/ti/k3-udma.c | 2 ++
>   2 files changed, 10 insertions(+)
> 
> diff --git a/drivers/dma/ti/edma.c b/drivers/dma/ti/edma.c
> index fa06d7e6d..85cd72b64 100644
> --- a/drivers/dma/ti/edma.c
> +++ b/drivers/dma/ti/edma.c
> @@ -2413,6 +2413,10 @@ static int edma_probe(struct platform_device *pdev)
>   	if (irq >= 0) {
>   		irq_name = devm_kasprintf(dev, GFP_KERNEL, "%s_ccint",
>   					  dev_name(dev));
> +		if (!irq_name) {
> +			ret = -ENOMEM;
> +			goto err_disable_pm;
> +		}
>   		ret = devm_request_irq(dev, irq, dma_irq_handler, 0, irq_name,
>   				       ecc);
>   		if (ret) {
> @@ -2429,6 +2433,10 @@ static int edma_probe(struct platform_device *pdev)
>   	if (irq >= 0) {
>   		irq_name = devm_kasprintf(dev, GFP_KERNEL, "%s_ccerrint",
>   					  dev_name(dev));
> +		if (!irq_name) {
> +			ret = -ENOMEM;
> +			goto err_disable_pm;
> +		}
>   		ret = devm_request_irq(dev, irq, dma_ccerr_handler, 0, irq_name,
>   				       ecc);
>   		if (ret) {
> diff --git a/drivers/dma/ti/k3-udma.c b/drivers/dma/ti/k3-udma.c
> index 7e23a6fde..692d1d25c 100644
> --- a/drivers/dma/ti/k3-udma.c
> +++ b/drivers/dma/ti/k3-udma.c
> @@ -5494,6 +5494,8 @@ static int udma_probe(struct platform_device *pdev)
>   		uc->config.dir = DMA_MEM_TO_MEM;
>   		uc->name = devm_kasprintf(dev, GFP_KERNEL, "%s chan%d",
>   					  dev_name(dev), i);
> +		if (!uc->name)
> +			return -ENOMEM;
>   
>   		vchan_init(&uc->vc, &ud->ddev);
>   		/* Use custom vchan completion handling */

-- 
Péter
Re: [PATCH] dmaengine: ti: add null check of devm_kasprintf in edma_probe and udma_probe
Posted by Vinod Koul 2 years, 5 months ago 
On 14-03-23, 22:01, Péter Ujfalusi wrote:
> Hi,
> 
> On 26/02/2023 11:40, Kang Chen wrote:
> > devm_kasprintf may fails, irq_name and uc->name might be null and wrong irq
> > name will be used in request.
> 
> In general, I would have preferred to have separate patches for the two
> drivers to make them easier to backport if one decides.

Right these should be separate

> 
> If you decide to resend, you can add my to them:
> 
> Acked-by: Peter Ujfalusi <peter.ujfalusi@gmail.com>
> 
> > 
> > Signed-off-by: Kang Chen <void0red@gmail.com>
> > ---
> >   drivers/dma/ti/edma.c    | 8 ++++++++
> >   drivers/dma/ti/k3-udma.c | 2 ++
> >   2 files changed, 10 insertions(+)
> > 
> > diff --git a/drivers/dma/ti/edma.c b/drivers/dma/ti/edma.c
> > index fa06d7e6d..85cd72b64 100644
> > --- a/drivers/dma/ti/edma.c
> > +++ b/drivers/dma/ti/edma.c
> > @@ -2413,6 +2413,10 @@ static int edma_probe(struct platform_device *pdev)
> >   	if (irq >= 0) {
> >   		irq_name = devm_kasprintf(dev, GFP_KERNEL, "%s_ccint",
> >   					  dev_name(dev));
> > +		if (!irq_name) {
> > +			ret = -ENOMEM;
> > +			goto err_disable_pm;
> > +		}
> >   		ret = devm_request_irq(dev, irq, dma_irq_handler, 0, irq_name,
> >   				       ecc);
> >   		if (ret) {
> > @@ -2429,6 +2433,10 @@ static int edma_probe(struct platform_device *pdev)
> >   	if (irq >= 0) {
> >   		irq_name = devm_kasprintf(dev, GFP_KERNEL, "%s_ccerrint",
> >   					  dev_name(dev));
> > +		if (!irq_name) {
> > +			ret = -ENOMEM;
> > +			goto err_disable_pm;
> > +		}
> >   		ret = devm_request_irq(dev, irq, dma_ccerr_handler, 0, irq_name,
> >   				       ecc);
> >   		if (ret) {
> > diff --git a/drivers/dma/ti/k3-udma.c b/drivers/dma/ti/k3-udma.c
> > index 7e23a6fde..692d1d25c 100644
> > --- a/drivers/dma/ti/k3-udma.c
> > +++ b/drivers/dma/ti/k3-udma.c
> > @@ -5494,6 +5494,8 @@ static int udma_probe(struct platform_device *pdev)
> >   		uc->config.dir = DMA_MEM_TO_MEM;
> >   		uc->name = devm_kasprintf(dev, GFP_KERNEL, "%s chan%d",
> >   					  dev_name(dev), i);
> > +		if (!uc->name)
> > +			return -ENOMEM;
> >   		vchan_init(&uc->vc, &ud->ddev);
> >   		/* Use custom vchan completion handling */
> 
> -- 
> Péter

-- 
~Vinod
[PATCH v2 1/2] dmaengine: ti: add null check of devm_kasprintf in udma_probe
Posted by void0red 2 years, 5 months ago 
From: Kang Chen <void0red@gmail.com>

devm_kasprintf may fails, uc->name might be null and wrong irq
name will be used in request.

Fixes: 25dcb5dd7b7c ("dmaengine: ti: New driver for K3 UDMA")
Acked-by: Peter Ujfalusi <peter.ujfalusi@gmail.com>
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Kang Chen <void0red@gmail.com>
---
v2 -> v1: split into two patches and add some tags

 drivers/dma/ti/k3-udma.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/dma/ti/k3-udma.c b/drivers/dma/ti/k3-udma.c
index 7e23a6fdef95..692d1d25c70a 100644
--- a/drivers/dma/ti/k3-udma.c
+++ b/drivers/dma/ti/k3-udma.c
@@ -5494,6 +5494,8 @@ static int udma_probe(struct platform_device *pdev)
 		uc->config.dir = DMA_MEM_TO_MEM;
 		uc->name = devm_kasprintf(dev, GFP_KERNEL, "%s chan%d",
 					  dev_name(dev), i);
+		if (!uc->name)
+			return -ENOMEM;
 
 		vchan_init(&uc->vc, &ud->ddev);
 		/* Use custom vchan completion handling */
-- 
2.34.1
[PATCH v2 2/2] dmaengine: ti: add null check of devm_kasprintf in edma_probe
Posted by void0red 2 years, 5 months ago 
From: Kang Chen <void0red@gmail.com>

devm_kasprintf may fails, irq_name might be null and wrong irq
name will be used in request.

Fixes: 2b6b3b742019 ("ARM/dmaengine: edma: Merge the two drivers under drivers/dma/")
Acked-by: Peter Ujfalusi <peter.ujfalusi@gmail.com>
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Kang Chen <void0red@gmail.com>
---
v2 -> v1: split into two patches and add some tags

 drivers/dma/ti/edma.c | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/drivers/dma/ti/edma.c b/drivers/dma/ti/edma.c
index fa06d7e6d8e3..85cd72b6401a 100644
--- a/drivers/dma/ti/edma.c
+++ b/drivers/dma/ti/edma.c
@@ -2413,6 +2413,10 @@ static int edma_probe(struct platform_device *pdev)
 	if (irq >= 0) {
 		irq_name = devm_kasprintf(dev, GFP_KERNEL, "%s_ccint",
 					  dev_name(dev));
+		if (!irq_name) {
+			ret = -ENOMEM;
+			goto err_disable_pm;
+		}
 		ret = devm_request_irq(dev, irq, dma_irq_handler, 0, irq_name,
 				       ecc);
 		if (ret) {
@@ -2429,6 +2433,10 @@ static int edma_probe(struct platform_device *pdev)
 	if (irq >= 0) {
 		irq_name = devm_kasprintf(dev, GFP_KERNEL, "%s_ccerrint",
 					  dev_name(dev));
+		if (!irq_name) {
+			ret = -ENOMEM;
+			goto err_disable_pm;
+		}
 		ret = devm_request_irq(dev, irq, dma_ccerr_handler, 0, irq_name,
 				       ecc);
 		if (ret) {
-- 
2.34.1

Patchew 2.1-devel-b67e4c2

© 2016 - 2025 Red Hat, Inc.