Throughout the ADT7475 driver, attributes relating to the temperature
sensors are displayed in the order Remote 1, Local, Remote 2.  Make
temp_st_show() conform to this expectation so that values set by
temp_st_store() can be displayed using the correct attribute.

Fixes: 8f05bcc33e74 ("hwmon: (adt7475) temperature smoothing")
Signed-off-by: Tony O'Brien <tony.obrien@alliedtelesis.co.nz>
---
Changes in v2:
- None
 drivers/hwmon/adt7475.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/hwmon/adt7475.c b/drivers/hwmon/adt7475.c
index 51b3d16c3223..77222c35a38e 100644
--- a/drivers/hwmon/adt7475.c
+++ b/drivers/hwmon/adt7475.c
@@ -556,11 +556,11 @@ static ssize_t temp_st_show(struct device *dev, struct device_attribute *attr,
 		val = data->enh_acoustics[0] & 0xf;
 		break;
 	case 1:
-		val = (data->enh_acoustics[1] >> 4) & 0xf;
+		val = data->enh_acoustics[1] & 0xf;
 		break;
 	case 2:
 	default:
-		val = data->enh_acoustics[1] & 0xf;
+		val = (data->enh_acoustics[1] >> 4) & 0xf;
 		break;
 	}
 
-- 
2.39.2

On Wed, Feb 22, 2023 at 01:52:27PM +1300, Tony O'Brien wrote:
> Throughout the ADT7475 driver, attributes relating to the temperature
> sensors are displayed in the order Remote 1, Local, Remote 2.  Make
> temp_st_show() conform to this expectation so that values set by
> temp_st_store() can be displayed using the correct attribute.
> 
> Fixes: 8f05bcc33e74 ("hwmon: (adt7475) temperature smoothing")
> Signed-off-by: Tony O'Brien <tony.obrien@alliedtelesis.co.nz>

Applied.

Thanks,
Guenter

> ---
> Changes in v2:
> - None
>  drivers/hwmon/adt7475.c | 4 ++--
>  1 file changed, 2 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/hwmon/adt7475.c b/drivers/hwmon/adt7475.c
> index 51b3d16c3223..77222c35a38e 100644
> --- a/drivers/hwmon/adt7475.c
> +++ b/drivers/hwmon/adt7475.c
> @@ -556,11 +556,11 @@ static ssize_t temp_st_show(struct device *dev, struct device_attribute *attr,
>  		val = data->enh_acoustics[0] & 0xf;
>  		break;
>  	case 1:
> -		val = (data->enh_acoustics[1] >> 4) & 0xf;
> +		val = data->enh_acoustics[1] & 0xf;
>  		break;
>  	case 2:
>  	default:
> -		val = data->enh_acoustics[1] & 0xf;
> +		val = (data->enh_acoustics[1] >> 4) & 0xf;
>  		break;
>  	}
>