[v2] arm64: dts: qcom: sa8775p-ride: enable relevant QUPv3 IPs

[PATCH v2 0/4] arm64: dts: qcom: sa8775p-ride: enable relevant QUPv3 IPs

Bartosz Golaszewski posted 4 patches 2 years, 6 months ago

Diff against v1 v3 v4 v5
Download series mbox

There is a newer version of this series

arch/arm64/boot/dts/qcom/sa8775p-ride.dts | 100 ++++++++++++++++++++++
arch/arm64/boot/dts/qcom/sa8775p.dtsi     |  87 +++++++++++++++++++
2 files changed, 187 insertions(+)

Expand all Fold all

[PATCH v2 0/4] arm64: dts: qcom: sa8775p-ride: enable relevant QUPv3 IPs

Posted by Bartosz Golaszewski 2 years, 6 months ago

From: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>

This enables the QUPv3 interfaces that are exposed on the sa8775p-ride
board: I2C, SPI and the Bluetooth and GNSS UART ports.

v1 -> v2:
- uart17 is the Bluetooth port, not GNSS
- add uart12 for GNSS too in that case

Bartosz Golaszewski (4):
  arm64: dts: qcom: sa8775p: add the i2c node for sa8775p-ride
  arm64: dts: qcom: sa8775p: add the SPI node for sa8775p-ride
  arm64: dts: qcom: sa8775p: add the GNSS high-speed UART for
    sa8775p-ride
  arm64: dts: qcom: sa8775p: add the BT high-speed UART for sa8775p-ride

 arch/arm64/boot/dts/qcom/sa8775p-ride.dts | 100 ++++++++++++++++++++++
 arch/arm64/boot/dts/qcom/sa8775p.dtsi     |  87 +++++++++++++++++++
 2 files changed, 187 insertions(+)

-- 
2.37.2