1. Patchew
  2. linux
  3. [RFC PATCH 0/5] Add dedicated Qcom ICE driver
  4. View patch

[RFC PATCH 2/5] arm64: dts: qcom: sm8450: Add the Inline Crypto Engine node

Abel Vesa posted 5 patches 2 years, 12 months ago
There is a newer version of this series
[RFC PATCH 2/5] arm64: dts: qcom: sm8450: Add the Inline Crypto Engine node
Posted by Abel Vesa 2 years, 12 months ago 
Drop all values related to the ICE from the UFS HC node and add a
dedicated ICE node. Also enable it in HDK board dts.

Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
---
 arch/arm64/boot/dts/qcom/sm8450-hdk.dts |  4 ++++
 arch/arm64/boot/dts/qcom/sm8450.dtsi    | 24 +++++++++++++++---------
 2 files changed, 19 insertions(+), 9 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sm8450-hdk.dts b/arch/arm64/boot/dts/qcom/sm8450-hdk.dts
index feef3837e4cd..de631deef1e8 100644
--- a/arch/arm64/boot/dts/qcom/sm8450-hdk.dts
+++ b/arch/arm64/boot/dts/qcom/sm8450-hdk.dts
@@ -461,6 +461,10 @@ lt9611_out: endpoint {
 	};
 };
 
+&ice {
+	status = "okay";
+};
+
 &mdss {
 	status = "okay";
 };
diff --git a/arch/arm64/boot/dts/qcom/sm8450.dtsi b/arch/arm64/boot/dts/qcom/sm8450.dtsi
index 1a744a33bcf4..34d569f6c239 100644
--- a/arch/arm64/boot/dts/qcom/sm8450.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8450.dtsi
@@ -3989,9 +3989,8 @@ system-cache-controller@19200000 {
 		ufs_mem_hc: ufshc@1d84000 {
 			compatible = "qcom,sm8450-ufshc", "qcom,ufshc",
 				     "jedec,ufs-2.0";
-			reg = <0 0x01d84000 0 0x3000>,
-			      <0 0x01d88000 0 0x8000>;
-			reg-names = "std", "ice";
+			reg = <0 0x01d84000 0 0x3000>;
+			reg-names = "std";
 			interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>;
 			phys = <&ufs_mem_phy_lanes>;
 			phy-names = "ufsphy";
@@ -4015,8 +4014,7 @@ ufs_mem_hc: ufshc@1d84000 {
 				"ref_clk",
 				"tx_lane0_sync_clk",
 				"rx_lane0_sync_clk",
-				"rx_lane1_sync_clk",
-				"ice_core_clk";
+				"rx_lane1_sync_clk";
 			clocks =
 				<&gcc GCC_UFS_PHY_AXI_CLK>,
 				<&gcc GCC_AGGRE_UFS_PHY_AXI_CLK>,
@@ -4025,8 +4023,7 @@ ufs_mem_hc: ufshc@1d84000 {
 				<&rpmhcc RPMH_CXO_CLK>,
 				<&gcc GCC_UFS_PHY_TX_SYMBOL_0_CLK>,
 				<&gcc GCC_UFS_PHY_RX_SYMBOL_0_CLK>,
-				<&gcc GCC_UFS_PHY_RX_SYMBOL_1_CLK>,
-				<&gcc GCC_UFS_PHY_ICE_CORE_CLK>;
+				<&gcc GCC_UFS_PHY_RX_SYMBOL_1_CLK>;
 			freq-table-hz =
 				<75000000 300000000>,
 				<0 0>,
@@ -4035,8 +4032,17 @@ ufs_mem_hc: ufshc@1d84000 {
 				<75000000 300000000>,
 				<0 0>,
 				<0 0>,
-				<0 0>,
-				<75000000 300000000>;
+				<0 0>;
+			qcom,ice = <&ice>;
+
+			status = "disabled";
+		};
+
+		ice: inline-crypto-engine {
+			compatible = "qcom,inline-crypto-engine";
+			reg = <0 0x01d88000 0 0x8000>;
+			clocks = <&gcc GCC_UFS_PHY_ICE_CORE_CLK>;
+
 			status = "disabled";
 		};
 
-- 
2.34.1
Re: [RFC PATCH 2/5] arm64: dts: qcom: sm8450: Add the Inline Crypto Engine node
Posted by Konrad Dybcio 2 years, 12 months ago 

On 14.02.2023 13:02, Abel Vesa wrote:
> Drop all values related to the ICE from the UFS HC node and add a
> dedicated ICE node. Also enable it in HDK board dts.
> 
> Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
> ---
>  arch/arm64/boot/dts/qcom/sm8450-hdk.dts |  4 ++++
>  arch/arm64/boot/dts/qcom/sm8450.dtsi    | 24 +++++++++++++++---------
>  2 files changed, 19 insertions(+), 9 deletions(-)
> 
> diff --git a/arch/arm64/boot/dts/qcom/sm8450-hdk.dts b/arch/arm64/boot/dts/qcom/sm8450-hdk.dts
> index feef3837e4cd..de631deef1e8 100644
> --- a/arch/arm64/boot/dts/qcom/sm8450-hdk.dts
> +++ b/arch/arm64/boot/dts/qcom/sm8450-hdk.dts
> @@ -461,6 +461,10 @@ lt9611_out: endpoint {
>  	};
>  };
>  
> +&ice {
> +	status = "okay";
> +};
> +
>  &mdss {
>  	status = "okay";
>  };
> diff --git a/arch/arm64/boot/dts/qcom/sm8450.dtsi b/arch/arm64/boot/dts/qcom/sm8450.dtsi
> index 1a744a33bcf4..34d569f6c239 100644
> --- a/arch/arm64/boot/dts/qcom/sm8450.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sm8450.dtsi
> @@ -3989,9 +3989,8 @@ system-cache-controller@19200000 {
>  		ufs_mem_hc: ufshc@1d84000 {
>  			compatible = "qcom,sm8450-ufshc", "qcom,ufshc",
>  				     "jedec,ufs-2.0";
> -			reg = <0 0x01d84000 0 0x3000>,
> -			      <0 0x01d88000 0 0x8000>;
> -			reg-names = "std", "ice";
> +			reg = <0 0x01d84000 0 0x3000>;
> +			reg-names = "std";
>  			interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>;
>  			phys = <&ufs_mem_phy_lanes>;
>  			phy-names = "ufsphy";
> @@ -4015,8 +4014,7 @@ ufs_mem_hc: ufshc@1d84000 {
>  				"ref_clk",
>  				"tx_lane0_sync_clk",
>  				"rx_lane0_sync_clk",
> -				"rx_lane1_sync_clk",
> -				"ice_core_clk";
> +				"rx_lane1_sync_clk";
>  			clocks =
>  				<&gcc GCC_UFS_PHY_AXI_CLK>,
>  				<&gcc GCC_AGGRE_UFS_PHY_AXI_CLK>,
> @@ -4025,8 +4023,7 @@ ufs_mem_hc: ufshc@1d84000 {
>  				<&rpmhcc RPMH_CXO_CLK>,
>  				<&gcc GCC_UFS_PHY_TX_SYMBOL_0_CLK>,
>  				<&gcc GCC_UFS_PHY_RX_SYMBOL_0_CLK>,
> -				<&gcc GCC_UFS_PHY_RX_SYMBOL_1_CLK>,
> -				<&gcc GCC_UFS_PHY_ICE_CORE_CLK>;
> +				<&gcc GCC_UFS_PHY_RX_SYMBOL_1_CLK>;
>  			freq-table-hz =
>  				<75000000 300000000>,
>  				<0 0>,
> @@ -4035,8 +4032,17 @@ ufs_mem_hc: ufshc@1d84000 {
>  				<75000000 300000000>,
>  				<0 0>,
>  				<0 0>,
> -				<0 0>,
> -				<75000000 300000000>;
> +				<0 0>;
> +			qcom,ice = <&ice>;
> +
> +			status = "disabled";
> +		};
> +
> +		ice: inline-crypto-engine {
> +			compatible = "qcom,inline-crypto-engine";
> +			reg = <0 0x01d88000 0 0x8000>;
> +			clocks = <&gcc GCC_UFS_PHY_ICE_CORE_CLK>;
> +
>  			status = "disabled";
Any reason for this guy to be disabled?

Konrad
>  		};
>

Patchew 2.1-devel-b67e4c2

© 2016 - 2026 Red Hat, Inc.