To allow to access system controller registers from watchdog driver code
add a phandle in the watchdog 'wdt' node. This avoid using arch dependent
operations in driver code.

Reviewed-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
---
 arch/mips/boot/dts/ralink/mt7621.dtsi | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/mips/boot/dts/ralink/mt7621.dtsi b/arch/mips/boot/dts/ralink/mt7621.dtsi
index ac818fd721ae..3d16beb77440 100644
--- a/arch/mips/boot/dts/ralink/mt7621.dtsi
+++ b/arch/mips/boot/dts/ralink/mt7621.dtsi
@@ -73,6 +73,7 @@ sysc: syscon@0 {
 		wdt: watchdog@100 {
 			compatible = "mediatek,mt7621-wdt";
 			reg = <0x100 0x100>;
+			mediatek,sysctl = <&sysc>;
 		};
 
 		gpio: gpio@600 {
-- 
2.25.1

On Tue, Feb 14, 2023 at 11:39:34AM +0100, Sergio Paracuellos wrote:
> To allow to access system controller registers from watchdog driver code
> add a phandle in the watchdog 'wdt' node. This avoid using arch dependent
> operations in driver code.
> 
> Reviewed-by: Arınç ÜNAL <arinc.unal@arinc9.com>
> Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
> ---
>  arch/mips/boot/dts/ralink/mt7621.dtsi | 1 +
>  1 file changed, 1 insertion(+)
> 
> diff --git a/arch/mips/boot/dts/ralink/mt7621.dtsi b/arch/mips/boot/dts/ralink/mt7621.dtsi
> index ac818fd721ae..3d16beb77440 100644
> --- a/arch/mips/boot/dts/ralink/mt7621.dtsi
> +++ b/arch/mips/boot/dts/ralink/mt7621.dtsi
> @@ -73,6 +73,7 @@ sysc: syscon@0 {
>  		wdt: watchdog@100 {
>  			compatible = "mediatek,mt7621-wdt";
>  			reg = <0x100 0x100>;
> +			mediatek,sysctl = <&sysc>;
>  		};
>  
>  		gpio: gpio@600 {
> -- 
> 2.25.1

applied to mips-next.

Thomas.

-- 
Crap can work. Given enough thrust pigs will fly, but it's not necessarily a
good idea.                                                [ RFC1925, 2.3 ]

On Tue, Feb 14, 2023 at 11:39:34AM +0100, Sergio Paracuellos wrote:
> To allow to access system controller registers from watchdog driver code
> add a phandle in the watchdog 'wdt' node. This avoid using arch dependent
> operations in driver code.
> 
> Reviewed-by: Arınç ÜNAL <arinc.unal@arinc9.com>
> Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>

Acked-by: Guenter Roeck <linux@roeck-us.net>

> ---
>  arch/mips/boot/dts/ralink/mt7621.dtsi | 1 +
>  1 file changed, 1 insertion(+)
> 
> diff --git a/arch/mips/boot/dts/ralink/mt7621.dtsi b/arch/mips/boot/dts/ralink/mt7621.dtsi
> index ac818fd721ae..3d16beb77440 100644
> --- a/arch/mips/boot/dts/ralink/mt7621.dtsi
> +++ b/arch/mips/boot/dts/ralink/mt7621.dtsi
> @@ -73,6 +73,7 @@ sysc: syscon@0 {
>  		wdt: watchdog@100 {
>  			compatible = "mediatek,mt7621-wdt";
>  			reg = <0x100 0x100>;
> +			mediatek,sysctl = <&sysc>;
>  		};
>  
>  		gpio: gpio@600 {
> -- 
> 2.25.1
>