1. Patchew
  2. linux
  3. View series

[PATCH v2] arm64: dts: qcom: sm6115: Add geni debug uart node for qup0

Bhupesh Sharma posted 1 patch 2 years, 7 months ago 
arch/arm64/boot/dts/qcom/sm6115.dtsi | 10 +++++++++-
1 file changed, 9 insertions(+), 1 deletion(-)
[PATCH v2] arm64: dts: qcom: sm6115: Add geni debug uart node for qup0
Posted by Bhupesh Sharma 2 years, 7 months ago 
qup0 on sm6115 / sm4250 has 6 SEs, with SE4 as debug uart.
Add the debug uart node in sm6115 dtsi file.

Cc: Bjorn Andersson <andersson@kernel.org>
Cc: Rob Herring <robh+dt@kernel.org>
Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org>
---
 Changes since v1:
  - v1 can be viewed here: https://lore.kernel.org/linux-arm-msm/20221128171215.1768745-1-bhupesh.sharma@linaro.org/
  - Addressed Konrad's review comments on v1.
  - Rebased againt latest linux-next/master which now has the 'qupv3_id_0' node
    already in the dtsi file, so just add the debug uart node in v2.

 arch/arm64/boot/dts/qcom/sm6115.dtsi | 10 +++++++++-
 1 file changed, 9 insertions(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/qcom/sm6115.dtsi b/arch/arm64/boot/dts/qcom/sm6115.dtsi
index 50cb8a82ecd5..3eccfb8c16ce 100644
--- a/arch/arm64/boot/dts/qcom/sm6115.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm6115.dtsi
@@ -963,6 +963,15 @@ spi4: spi@4a90000 {
 				status = "disabled";
 			};
 
+			uart4: serial@4a90000 {
+				compatible = "qcom,geni-debug-uart";
+				reg = <0x04a90000 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>;
+				interrupts = <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
+
 			i2c5: i2c@4a94000 {
 				compatible = "qcom,geni-i2c";
 				reg = <0x04a94000 0x4000>;
@@ -992,7 +1001,6 @@ spi5: spi@4a94000 {
 				dma-names = "tx", "rx";
 				#address-cells = <1>;
 				#size-cells = <0>;
-				status = "disabled";
 			};
 		};
 
-- 
2.38.1
Re: [PATCH v2] arm64: dts: qcom: sm6115: Add geni debug uart node for qup0
Posted by Matthias Kaehlcke 2 years, 7 months ago 
On Wed, Feb 08, 2023 at 05:57:18PM +0530, Bhupesh Sharma wrote:
> qup0 on sm6115 / sm4250 has 6 SEs, with SE4 as debug uart.
> Add the debug uart node in sm6115 dtsi file.

Is there anything special about SE4 that makes it *the* debug
UART or does it just happen to be the UART that is used by the
reference board? I suspect the latter, in which case the
"qcom,geni-debug-uart" string should be set/overwritten in the
board file as in sc7280-qcard.dtsi or sc8280xp-crd.dts.

> Cc: Bjorn Andersson <andersson@kernel.org>
> Cc: Rob Herring <robh+dt@kernel.org>
> Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org>
> ---
>  Changes since v1:
>   - v1 can be viewed here: https://lore.kernel.org/linux-arm-msm/20221128171215.1768745-1-bhupesh.sharma@linaro.org/
>   - Addressed Konrad's review comments on v1.
>   - Rebased againt latest linux-next/master which now has the 'qupv3_id_0' node
>     already in the dtsi file, so just add the debug uart node in v2.
> 
>  arch/arm64/boot/dts/qcom/sm6115.dtsi | 10 +++++++++-
>  1 file changed, 9 insertions(+), 1 deletion(-)
> 
> diff --git a/arch/arm64/boot/dts/qcom/sm6115.dtsi b/arch/arm64/boot/dts/qcom/sm6115.dtsi
> index 50cb8a82ecd5..3eccfb8c16ce 100644
> --- a/arch/arm64/boot/dts/qcom/sm6115.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sm6115.dtsi
> @@ -963,6 +963,15 @@ spi4: spi@4a90000 {
>  				status = "disabled";
>  			};
>  
> +			uart4: serial@4a90000 {
> +				compatible = "qcom,geni-debug-uart";
> +				reg = <0x04a90000 0x4000>;
> +				clock-names = "se";
> +				clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>;
> +				interrupts = <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>;
> +				status = "disabled";
> +			};
> +
>  			i2c5: i2c@4a94000 {
>  				compatible = "qcom,geni-i2c";
>  				reg = <0x04a94000 0x4000>;
> @@ -992,7 +1001,6 @@ spi5: spi@4a94000 {
>  				dma-names = "tx", "rx";
>  				#address-cells = <1>;
>  				#size-cells = <0>;
> -				status = "disabled";
>  			};
>  		};
>  
> -- 
> 2.38.1
>
Re: [PATCH v2] arm64: dts: qcom: sm6115: Add geni debug uart node for qup0
Posted by Krzysztof Kozlowski 2 years, 7 months ago 
On 08/02/2023 13:27, Bhupesh Sharma wrote:
> qup0 on sm6115 / sm4250 has 6 SEs, with SE4 as debug uart.
> Add the debug uart node in sm6115 dtsi file.
> 
> Cc: Bjorn Andersson <andersson@kernel.org>
> Cc: Rob Herring <robh+dt@kernel.org>
> Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org>
> ---
>  Changes since v1:
>   - v1 can be viewed here: https://lore.kernel.org/linux-arm-msm/20221128171215.1768745-1-bhupesh.sharma@linaro.org/
>   - Addressed Konrad's review comments on v1.
>   - Rebased againt latest linux-next/master which now has the 'qupv3_id_0' node
>     already in the dtsi file, so just add the debug uart node in v2.
> 
>  arch/arm64/boot/dts/qcom/sm6115.dtsi | 10 +++++++++-
>  1 file changed, 9 insertions(+), 1 deletion(-)
> 
> diff --git a/arch/arm64/boot/dts/qcom/sm6115.dtsi b/arch/arm64/boot/dts/qcom/sm6115.dtsi
> index 50cb8a82ecd5..3eccfb8c16ce 100644
> --- a/arch/arm64/boot/dts/qcom/sm6115.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sm6115.dtsi
> @@ -963,6 +963,15 @@ spi4: spi@4a90000 {
>  				status = "disabled";
>  			};
>  
> +			uart4: serial@4a90000 {
> +				compatible = "qcom,geni-debug-uart";
> +				reg = <0x04a90000 0x4000>;
> +				clock-names = "se";
> +				clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>;
> +				interrupts = <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>;
> +				status = "disabled";
> +			};
> +
>  			i2c5: i2c@4a94000 {
>  				compatible = "qcom,geni-i2c";
>  				reg = <0x04a94000 0x4000>;
> @@ -992,7 +1001,6 @@ spi5: spi@4a94000 {
>  				dma-names = "tx", "rx";
>  				#address-cells = <1>;
>  				#size-cells = <0>;
> -				status = "disabled";

Why do you enable SPI? The commit msg is not explaining it.

Best regards
Re: [PATCH v2] arm64: dts: qcom: sm6115: Add geni debug uart node for qup0
Posted by Krzysztof Kozlowski 2 years, 7 months ago 
On 09/02/2023 16:11, Krzysztof Kozlowski wrote:
> On 08/02/2023 13:27, Bhupesh Sharma wrote:
>> qup0 on sm6115 / sm4250 has 6 SEs, with SE4 as debug uart.
>> Add the debug uart node in sm6115 dtsi file.
>>
>> Cc: Bjorn Andersson <andersson@kernel.org>
>> Cc: Rob Herring <robh+dt@kernel.org>
>> Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org>
>> ---
>>  Changes since v1:
>>   - v1 can be viewed here: https://lore.kernel.org/linux-arm-msm/20221128171215.1768745-1-bhupesh.sharma@linaro.org/
>>   - Addressed Konrad's review comments on v1.
>>   - Rebased againt latest linux-next/master which now has the 'qupv3_id_0' node
>>     already in the dtsi file, so just add the debug uart node in v2.
>>
>>  arch/arm64/boot/dts/qcom/sm6115.dtsi | 10 +++++++++-
>>  1 file changed, 9 insertions(+), 1 deletion(-)
>>
>> diff --git a/arch/arm64/boot/dts/qcom/sm6115.dtsi b/arch/arm64/boot/dts/qcom/sm6115.dtsi
>> index 50cb8a82ecd5..3eccfb8c16ce 100644
>> --- a/arch/arm64/boot/dts/qcom/sm6115.dtsi
>> +++ b/arch/arm64/boot/dts/qcom/sm6115.dtsi
>> @@ -963,6 +963,15 @@ spi4: spi@4a90000 {
>>  				status = "disabled";
>>  			};
>>  
>> +			uart4: serial@4a90000 {
>> +				compatible = "qcom,geni-debug-uart";
>> +				reg = <0x04a90000 0x4000>;
>> +				clock-names = "se";
>> +				clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>;
>> +				interrupts = <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>;
>> +				status = "disabled";
>> +			};
>> +
>>  			i2c5: i2c@4a94000 {
>>  				compatible = "qcom,geni-i2c";
>>  				reg = <0x04a94000 0x4000>;
>> @@ -992,7 +1001,6 @@ spi5: spi@4a94000 {
>>  				dma-names = "tx", "rx";
>>  				#address-cells = <1>;
>>  				#size-cells = <0>;
>> -				status = "disabled";
> 
> Why do you enable SPI? The commit msg is not explaining it.

Sent fixup:
https://lore.kernel.org/linux-arm-msm/20230209155831.100066-1-krzysztof.kozlowski@linaro.org/T/#u

Best regards,
Krzysztof
Re: [PATCH v2] arm64: dts: qcom: sm6115: Add geni debug uart node for qup0
Posted by Bjorn Andersson 2 years, 7 months ago 
On Wed, 8 Feb 2023 17:57:18 +0530, Bhupesh Sharma wrote:
> qup0 on sm6115 / sm4250 has 6 SEs, with SE4 as debug uart.
> Add the debug uart node in sm6115 dtsi file.
> 
> 

Applied, thanks!

[1/1] arm64: dts: qcom: sm6115: Add geni debug uart node for qup0
      commit: 25aab0b852d63784586ed99148d9af37a820a0c8

Best regards,
-- 
Bjorn Andersson <andersson@kernel.org>

Patchew 2.1-devel-b67e4c2

© 2016 - 2025 Red Hat, Inc.