The phy pattern property will be used for providing eUSB2 repeater
functionality. This will be modelled as a Qualcomm PHY driver.

Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
---
 Documentation/devicetree/bindings/mfd/qcom,spmi-pmic.yaml | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/Documentation/devicetree/bindings/mfd/qcom,spmi-pmic.yaml b/Documentation/devicetree/bindings/mfd/qcom,spmi-pmic.yaml
index adf88245c409..1e6fadec1301 100644
--- a/Documentation/devicetree/bindings/mfd/qcom,spmi-pmic.yaml
+++ b/Documentation/devicetree/bindings/mfd/qcom,spmi-pmic.yaml
@@ -135,6 +135,10 @@ patternProperties:
     type: object
     $ref: /schemas/pinctrl/qcom,pmic-gpio.yaml#
 
+  "phy@[0-9a-f]+$":
+    type: object
+    $ref: /schemas/phy/qcom,snps-eusb2-repeater.yaml#
+
   "pon@[0-9a-f]+$":
     type: object
     $ref: /schemas/power/reset/qcom,pon.yaml#
-- 
2.34.1

On 02/02/2023 14:38, Abel Vesa wrote:
> The phy pattern property will be used for providing eUSB2 repeater
> functionality. This will be modelled as a Qualcomm PHY driver.
> 
> Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
> ---
>  Documentation/devicetree/bindings/mfd/qcom,spmi-pmic.yaml | 4 ++++

You need to re-order your patches to keep everything bisectable.

Best regards,
Krzysztof

On Thu, 02 Feb 2023 15:38:10 +0200, Abel Vesa wrote:
> The phy pattern property will be used for providing eUSB2 repeater
> functionality. This will be modelled as a Qualcomm PHY driver.
> 
> Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
> ---
>  Documentation/devicetree/bindings/mfd/qcom,spmi-pmic.yaml | 4 ++++
>  1 file changed, 4 insertions(+)
> 

My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
on your patch (DT_CHECKER_FLAGS is new in v5.13):

yamllint warnings/errors:

dtschema/dtc warnings/errors:
./Documentation/devicetree/bindings/mfd/qcom,spmi-pmic.yaml: Unable to find schema file matching $id: http://devicetree.org/schemas/phy/qcom,snps-eusb2-repeater.yaml

doc reference errors (make refcheckdocs):

See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20230202133816.4026990-2-abel.vesa@linaro.org

The base for the series is generally the latest rc1. A different dependency
should be noted in *this* patch.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit after running the above command yourself. Note
that DT_SCHEMA_FILES can be set to your schema file to speed up checking
your schema. However, it must be unset to test all examples with your schema.