From: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>

Enable the pinctrl, GCC clock and interconnect drivers in order to allow
booting SA8775P boards. The drivers need to be built-in for QUPv3 and
subsequently UART console to work.

Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
---
All drivers are now in next so let's enable them.

 arch/arm64/configs/defconfig | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig
index 984553d55e17..998ca0e07689 100644
--- a/arch/arm64/configs/defconfig
+++ b/arch/arm64/configs/defconfig
@@ -560,6 +560,7 @@ CONFIG_PINCTRL_QCM2290=y
 CONFIG_PINCTRL_QCS404=y
 CONFIG_PINCTRL_QDF2XXX=y
 CONFIG_PINCTRL_QCOM_SPMI_PMIC=y
+CONFIG_PINCTRL_SA8775P=y
 CONFIG_PINCTRL_SC7180=y
 CONFIG_PINCTRL_SC7280=y
 CONFIG_PINCTRL_SC8180X=y
@@ -1352,6 +1353,7 @@ CONFIG_INTERCONNECT_QCOM_MSM8916=m
 CONFIG_INTERCONNECT_QCOM_MSM8996=m
 CONFIG_INTERCONNECT_QCOM_OSM_L3=m
 CONFIG_INTERCONNECT_QCOM_QCS404=m
+CONFIG_INTERCONNECT_QCOM_SA8775P=y
 CONFIG_INTERCONNECT_QCOM_SC7180=y
 CONFIG_INTERCONNECT_QCOM_SC7280=y
 CONFIG_INTERCONNECT_QCOM_SC8180X=y
-- 
2.37.2

On 02/02/2023 10:59, Bartosz Golaszewski wrote:
> From: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
> 
> Enable the pinctrl, GCC clock and interconnect drivers in order to allow
> booting SA8775P boards. The drivers need to be built-in for QUPv3 and
> subsequently UART console to work.
> 
> Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

Note, you didn't include linux-arm-msm into the To/Cc, so this patch 
might miss Bjorn's patchwork.

> ---
> All drivers are now in next so let's enable them.
> 
>   arch/arm64/configs/defconfig | 2 ++
>   1 file changed, 2 insertions(+)
> 
> diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig
> index 984553d55e17..998ca0e07689 100644
> --- a/arch/arm64/configs/defconfig
> +++ b/arch/arm64/configs/defconfig
> @@ -560,6 +560,7 @@ CONFIG_PINCTRL_QCM2290=y
>   CONFIG_PINCTRL_QCS404=y
>   CONFIG_PINCTRL_QDF2XXX=y
>   CONFIG_PINCTRL_QCOM_SPMI_PMIC=y
> +CONFIG_PINCTRL_SA8775P=y
>   CONFIG_PINCTRL_SC7180=y
>   CONFIG_PINCTRL_SC7280=y
>   CONFIG_PINCTRL_SC8180X=y
> @@ -1352,6 +1353,7 @@ CONFIG_INTERCONNECT_QCOM_MSM8916=m
>   CONFIG_INTERCONNECT_QCOM_MSM8996=m
>   CONFIG_INTERCONNECT_QCOM_OSM_L3=m
>   CONFIG_INTERCONNECT_QCOM_QCS404=m
> +CONFIG_INTERCONNECT_QCOM_SA8775P=y
>   CONFIG_INTERCONNECT_QCOM_SC7180=y
>   CONFIG_INTERCONNECT_QCOM_SC7280=y
>   CONFIG_INTERCONNECT_QCOM_SC8180X=y

-- 
With best wishes
Dmitry

On Thu, 2 Feb 2023 at 10:23, Dmitry Baryshkov
<dmitry.baryshkov@linaro.org> wrote:
>
> On 02/02/2023 10:59, Bartosz Golaszewski wrote:
> > From: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
> >
> > Enable the pinctrl, GCC clock and interconnect drivers in order to allow
> > booting SA8775P boards. The drivers need to be built-in for QUPv3 and
> > subsequently UART console to work.
> >
> > Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
>
> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
>
> Note, you didn't include linux-arm-msm into the To/Cc, so this patch
> might miss Bjorn's patchwork.
>

Thanks for the heads-up, I'll resend it if he doesn't pick it up in
the following days.

Bart

On 02/02/2023 09:59, Bartosz Golaszewski wrote:
> From: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
> 
> Enable the pinctrl, GCC clock and interconnect drivers in order to allow
> booting SA8775P boards. The drivers need to be built-in for QUPv3 and
> subsequently UART console to work.
> 
> Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
> ---


Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

Best regards,
Krzysztof