1. Patchew
  2. linux
  3. View series

[PATCH] thermal: intel_powerclamp: Return last requested state as cur_state

Srinivas Pandruvada posted 1 patch 3 years ago
There is a newer version of this series
drivers/thermal/intel/intel_powerclamp.c | 12 +-----------
1 file changed, 1 insertion(+), 11 deletions(-)
[PATCH] thermal: intel_powerclamp: Return last requested state as cur_state
Posted by Srinivas Pandruvada 3 years ago 
When the user is reading cur_state from the thermal cooling device for
Intel powerclamp device:
- It returns the idle ratio from Package C-state counters when
there is active idle injection session.
- -1, when there is no active idle injection session.

This information is not very useful as the package C-state counters vary
a lot from read to read. Instead just return the last requested cur_state.

Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
---
 drivers/thermal/intel/intel_powerclamp.c | 12 +-----------
 1 file changed, 1 insertion(+), 11 deletions(-)

diff --git a/drivers/thermal/intel/intel_powerclamp.c b/drivers/thermal/intel/intel_powerclamp.c
index 2f4cbfdf26a0..72a45cf2708c 100644
--- a/drivers/thermal/intel/intel_powerclamp.c
+++ b/drivers/thermal/intel/intel_powerclamp.c
@@ -590,17 +590,7 @@ static int powerclamp_get_max_state(struct thermal_cooling_device *cdev,
 static int powerclamp_get_cur_state(struct thermal_cooling_device *cdev,
 				 unsigned long *state)
 {
-	if (clamping) {
-		if (poll_pkg_cstate_enable)
-			*state = pkg_cstate_ratio_cur;
-		else
-			*state = set_target_ratio;
-	} else {
-		/* to save power, do not poll idle ratio while not clamping */
-		*state = -1; /* indicates invalid state */
-	}
-
-	return 0;
+	return set_target_ratio;
 }
 
 static int powerclamp_set_cur_state(struct thermal_cooling_device *cdev,
-- 
2.39.1
Re: [PATCH] thermal: intel_powerclamp: Return last requested state as cur_state
Posted by Rafael J. Wysocki 3 years ago 
On Wed, Feb 1, 2023 at 10:07 PM Srinivas Pandruvada
<srinivas.pandruvada@linux.intel.com> wrote:
>
> When the user is reading cur_state from the thermal cooling device for
> Intel powerclamp device:
> - It returns the idle ratio from Package C-state counters when
> there is active idle injection session.
> - -1, when there is no active idle injection session.
>
> This information is not very useful as the package C-state counters vary
> a lot from read to read. Instead just return the last requested cur_state.
>
> Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
> ---
>  drivers/thermal/intel/intel_powerclamp.c | 12 +-----------
>  1 file changed, 1 insertion(+), 11 deletions(-)
>
> diff --git a/drivers/thermal/intel/intel_powerclamp.c b/drivers/thermal/intel/intel_powerclamp.c
> index 2f4cbfdf26a0..72a45cf2708c 100644
> --- a/drivers/thermal/intel/intel_powerclamp.c
> +++ b/drivers/thermal/intel/intel_powerclamp.c
> @@ -590,17 +590,7 @@ static int powerclamp_get_max_state(struct thermal_cooling_device *cdev,
>  static int powerclamp_get_cur_state(struct thermal_cooling_device *cdev,
>                                  unsigned long *state)
>  {
> -       if (clamping) {
> -               if (poll_pkg_cstate_enable)
> -                       *state = pkg_cstate_ratio_cur;
> -               else
> -                       *state = set_target_ratio;
> -       } else {
> -               /* to save power, do not poll idle ratio while not clamping */
> -               *state = -1; /* indicates invalid state */
> -       }
> -
> -       return 0;
> +       return set_target_ratio;

*state = set_target_ratio;
return 0;

>  }
>
>  static int powerclamp_set_cur_state(struct thermal_cooling_device *cdev,
> --

And please rebase it on top of the idle_inject series (which is being
added to my bleeding-edge branch right now).
Re: [PATCH] thermal: intel_powerclamp: Return last requested state as cur_state
Posted by srinivas pandruvada 3 years ago 
On Thu, 2023-02-02 at 17:44 +0100, Rafael J. Wysocki wrote:
> On Wed, Feb 1, 2023 at 10:07 PM Srinivas Pandruvada
> <srinivas.pandruvada@linux.intel.com> wrote:
> > 
> > When the user is reading cur_state from the thermal cooling device
> > for
> > Intel powerclamp device:
> > - It returns the idle ratio from Package C-state counters when
> > there is active idle injection session.
> > - -1, when there is no active idle injection session.
> > 
> > This information is not very useful as the package C-state counters
> > vary
> > a lot from read to read. Instead just return the last requested
> > cur_state.
> > 
> > Signed-off-by: Srinivas Pandruvada
> > <srinivas.pandruvada@linux.intel.com>
> > ---
> >  drivers/thermal/intel/intel_powerclamp.c | 12 +-----------
> >  1 file changed, 1 insertion(+), 11 deletions(-)
> > 
> > diff --git a/drivers/thermal/intel/intel_powerclamp.c
> > b/drivers/thermal/intel/intel_powerclamp.c
> > index 2f4cbfdf26a0..72a45cf2708c 100644
> > --- a/drivers/thermal/intel/intel_powerclamp.c
> > +++ b/drivers/thermal/intel/intel_powerclamp.c
> > @@ -590,17 +590,7 @@ static int powerclamp_get_max_state(struct
> > thermal_cooling_device *cdev,
> >  static int powerclamp_get_cur_state(struct thermal_cooling_device
> > *cdev,
> >                                  unsigned long *state)
> >  {
> > -       if (clamping) {
> > -               if (poll_pkg_cstate_enable)
> > -                       *state = pkg_cstate_ratio_cur;
> > -               else
> > -                       *state = set_target_ratio;
> > -       } else {
> > -               /* to save power, do not poll idle ratio while not
> > clamping */
> > -               *state = -1; /* indicates invalid state */
> > -       }
> > -
> > -       return 0;
> > +       return set_target_ratio;
> 
> *state = set_target_ratio;
> return 0;
> 
Sorry.

What a blunder! Sent patch from 37000 ft. Should never do that.

Thanks,
Srinivas


> >  }
> > 
> >  static int powerclamp_set_cur_state(struct thermal_cooling_device
> > *cdev,
> > --
> 
> And please rebase it on top of the idle_inject series (which is being
> added to my bleeding-edge branch right now).
Re: [PATCH] thermal: intel_powerclamp: Return last requested state as cur_state
Posted by Rafael J. Wysocki 3 years ago 
On Thu, Feb 2, 2023 at 11:21 PM srinivas pandruvada
<srinivas.pandruvada@linux.intel.com> wrote:
>
> On Thu, 2023-02-02 at 17:44 +0100, Rafael J. Wysocki wrote:
> > On Wed, Feb 1, 2023 at 10:07 PM Srinivas Pandruvada
> > <srinivas.pandruvada@linux.intel.com> wrote:
> > >
> > > When the user is reading cur_state from the thermal cooling device
> > > for
> > > Intel powerclamp device:
> > > - It returns the idle ratio from Package C-state counters when
> > > there is active idle injection session.
> > > - -1, when there is no active idle injection session.
> > >
> > > This information is not very useful as the package C-state counters
> > > vary
> > > a lot from read to read. Instead just return the last requested
> > > cur_state.
> > >
> > > Signed-off-by: Srinivas Pandruvada
> > > <srinivas.pandruvada@linux.intel.com>
> > > ---
> > >  drivers/thermal/intel/intel_powerclamp.c | 12 +-----------
> > >  1 file changed, 1 insertion(+), 11 deletions(-)
> > >
> > > diff --git a/drivers/thermal/intel/intel_powerclamp.c
> > > b/drivers/thermal/intel/intel_powerclamp.c
> > > index 2f4cbfdf26a0..72a45cf2708c 100644
> > > --- a/drivers/thermal/intel/intel_powerclamp.c
> > > +++ b/drivers/thermal/intel/intel_powerclamp.c
> > > @@ -590,17 +590,7 @@ static int powerclamp_get_max_state(struct
> > > thermal_cooling_device *cdev,
> > >  static int powerclamp_get_cur_state(struct thermal_cooling_device
> > > *cdev,
> > >                                  unsigned long *state)
> > >  {
> > > -       if (clamping) {
> > > -               if (poll_pkg_cstate_enable)
> > > -                       *state = pkg_cstate_ratio_cur;
> > > -               else
> > > -                       *state = set_target_ratio;
> > > -       } else {
> > > -               /* to save power, do not poll idle ratio while not
> > > clamping */
> > > -               *state = -1; /* indicates invalid state */
> > > -       }
> > > -
> > > -       return 0;
> > > +       return set_target_ratio;
> >
> > *state = set_target_ratio;
> > return 0;
> >
> Sorry.
>
> What a blunder! Sent patch from 37000 ft. Should never do that.

No worries.

I didn't realize that you were traveling.

I can prepare this patch myself just fine if that helps.

Patchew 2.1-devel-b67e4c2

© 2016 - 2026 Red Hat, Inc.