[PATCH 13/23] interconnect: qcom: sm8550: fix registration race

Johan Hovold posted 23 patches 2 years, 7 months ago
There is a newer version of this series
[PATCH 13/23] interconnect: qcom: sm8550: fix registration race
Posted by Johan Hovold 2 years, 7 months ago
The current interconnect provider registration interface is inherently
racy as nodes are not added until the after adding the provider. This
can specifically cause racing DT lookups to fail.

Switch to using the new API where the provider is not registered until
after it has been fully initialised.

Fixes: e6f0d6a30f73 ("interconnect: qcom: Add SM8550 interconnect provider driver")
Cc: Abel Vesa <abel.vesa@linaro.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
---
 drivers/interconnect/qcom/sm8550.c | 22 +++++++++++-----------
 1 file changed, 11 insertions(+), 11 deletions(-)

diff --git a/drivers/interconnect/qcom/sm8550.c b/drivers/interconnect/qcom/sm8550.c
index 54fa027ab961..7ab492ca8fe0 100644
--- a/drivers/interconnect/qcom/sm8550.c
+++ b/drivers/interconnect/qcom/sm8550.c
@@ -2197,9 +2197,10 @@ static int qnoc_probe(struct platform_device *pdev)
 	provider->pre_aggregate = qcom_icc_pre_aggregate;
 	provider->aggregate = qcom_icc_aggregate;
 	provider->xlate_extended = qcom_icc_xlate_extended;
-	INIT_LIST_HEAD(&provider->nodes);
 	provider->data = data;
 
+	icc_provider_init(provider);
+
 	qp->dev = &pdev->dev;
 	qp->bcms = desc->bcms;
 	qp->num_bcms = desc->num_bcms;
@@ -2208,12 +2209,6 @@ static int qnoc_probe(struct platform_device *pdev)
 	if (IS_ERR(qp->voter))
 		return PTR_ERR(qp->voter);
 
-	ret = icc_provider_add(provider);
-	if (ret) {
-		dev_err_probe(&pdev->dev, ret,
-			      "error adding interconnect provider\n");
-		return ret;
-	}
 
 	for (i = 0; i < qp->num_bcms; i++)
 		qcom_icc_bcm_init(qp->bcms[i], &pdev->dev);
@@ -2227,7 +2222,7 @@ static int qnoc_probe(struct platform_device *pdev)
 		node = icc_node_create(qnodes[i]->id);
 		if (IS_ERR(node)) {
 			ret = PTR_ERR(node);
-			goto err;
+			goto err_remove_nodes;
 		}
 
 		node->name = qnodes[i]->name;
@@ -2241,12 +2236,17 @@ static int qnoc_probe(struct platform_device *pdev)
 	}
 	data->num_nodes = num_nodes;
 
+	ret = icc_provider_register(provider);
+	if (ret)
+		goto err_remove_nodes;
+
 	platform_set_drvdata(pdev, qp);
 
 	return 0;
-err:
+
+err_remove_nodes:
 	icc_nodes_remove(provider);
-	icc_provider_del(provider);
+
 	return ret;
 }
 
@@ -2254,8 +2254,8 @@ static int qnoc_remove(struct platform_device *pdev)
 {
 	struct qcom_icc_provider *qp = platform_get_drvdata(pdev);
 
+	icc_provider_deregister(&qp->provider);
 	icc_nodes_remove(&qp->provider);
-	icc_provider_del(&qp->provider);
 
 	return 0;
 }
-- 
2.39.1
Re: [PATCH 13/23] interconnect: qcom: sm8550: fix registration race
Posted by Konrad Dybcio 2 years, 7 months ago

On 1.02.2023 11:15, Johan Hovold wrote:
> The current interconnect provider registration interface is inherently
> racy as nodes are not added until the after adding the provider. This
> can specifically cause racing DT lookups to fail.
> 
> Switch to using the new API where the provider is not registered until
> after it has been fully initialised.
> 
> Fixes: e6f0d6a30f73 ("interconnect: qcom: Add SM8550 interconnect provider driver")
> Cc: Abel Vesa <abel.vesa@linaro.org>
> Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
> ---
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>

Konrad
>  drivers/interconnect/qcom/sm8550.c | 22 +++++++++++-----------
>  1 file changed, 11 insertions(+), 11 deletions(-)
> 
> diff --git a/drivers/interconnect/qcom/sm8550.c b/drivers/interconnect/qcom/sm8550.c
> index 54fa027ab961..7ab492ca8fe0 100644
> --- a/drivers/interconnect/qcom/sm8550.c
> +++ b/drivers/interconnect/qcom/sm8550.c
> @@ -2197,9 +2197,10 @@ static int qnoc_probe(struct platform_device *pdev)
>  	provider->pre_aggregate = qcom_icc_pre_aggregate;
>  	provider->aggregate = qcom_icc_aggregate;
>  	provider->xlate_extended = qcom_icc_xlate_extended;
> -	INIT_LIST_HEAD(&provider->nodes);
>  	provider->data = data;
>  
> +	icc_provider_init(provider);
> +
>  	qp->dev = &pdev->dev;
>  	qp->bcms = desc->bcms;
>  	qp->num_bcms = desc->num_bcms;
> @@ -2208,12 +2209,6 @@ static int qnoc_probe(struct platform_device *pdev)
>  	if (IS_ERR(qp->voter))
>  		return PTR_ERR(qp->voter);
>  
> -	ret = icc_provider_add(provider);
> -	if (ret) {
> -		dev_err_probe(&pdev->dev, ret,
> -			      "error adding interconnect provider\n");
> -		return ret;
> -	}
>  
>  	for (i = 0; i < qp->num_bcms; i++)
>  		qcom_icc_bcm_init(qp->bcms[i], &pdev->dev);
> @@ -2227,7 +2222,7 @@ static int qnoc_probe(struct platform_device *pdev)
>  		node = icc_node_create(qnodes[i]->id);
>  		if (IS_ERR(node)) {
>  			ret = PTR_ERR(node);
> -			goto err;
> +			goto err_remove_nodes;
>  		}
>  
>  		node->name = qnodes[i]->name;
> @@ -2241,12 +2236,17 @@ static int qnoc_probe(struct platform_device *pdev)
>  	}
>  	data->num_nodes = num_nodes;
>  
> +	ret = icc_provider_register(provider);
> +	if (ret)
> +		goto err_remove_nodes;
> +
>  	platform_set_drvdata(pdev, qp);
>  
>  	return 0;
> -err:
> +
> +err_remove_nodes:
>  	icc_nodes_remove(provider);
> -	icc_provider_del(provider);
> +
>  	return ret;
>  }
>  
> @@ -2254,8 +2254,8 @@ static int qnoc_remove(struct platform_device *pdev)
>  {
>  	struct qcom_icc_provider *qp = platform_get_drvdata(pdev);
>  
> +	icc_provider_deregister(&qp->provider);
>  	icc_nodes_remove(&qp->provider);
> -	icc_provider_del(&qp->provider);
>  
>  	return 0;
>  }
Re: [PATCH 13/23] interconnect: qcom: sm8550: fix registration race
Posted by Abel Vesa 2 years, 7 months ago
On 23-02-01 11:15:49, Johan Hovold wrote:
> The current interconnect provider registration interface is inherently
> racy as nodes are not added until the after adding the provider. This
> can specifically cause racing DT lookups to fail.
> 
> Switch to using the new API where the provider is not registered until
> after it has been fully initialised.

Sounds good to me.

> 
> Fixes: e6f0d6a30f73 ("interconnect: qcom: Add SM8550 interconnect provider driver")
> Cc: Abel Vesa <abel.vesa@linaro.org>
> Signed-off-by: Johan Hovold <johan+linaro@kernel.org>

Reviewed-by: Abel Vesa <abel.vesa@linaro.org>

> ---
>  drivers/interconnect/qcom/sm8550.c | 22 +++++++++++-----------
>  1 file changed, 11 insertions(+), 11 deletions(-)
> 
> diff --git a/drivers/interconnect/qcom/sm8550.c b/drivers/interconnect/qcom/sm8550.c
> index 54fa027ab961..7ab492ca8fe0 100644
> --- a/drivers/interconnect/qcom/sm8550.c
> +++ b/drivers/interconnect/qcom/sm8550.c
> @@ -2197,9 +2197,10 @@ static int qnoc_probe(struct platform_device *pdev)
>  	provider->pre_aggregate = qcom_icc_pre_aggregate;
>  	provider->aggregate = qcom_icc_aggregate;
>  	provider->xlate_extended = qcom_icc_xlate_extended;
> -	INIT_LIST_HEAD(&provider->nodes);
>  	provider->data = data;
>  
> +	icc_provider_init(provider);
> +
>  	qp->dev = &pdev->dev;
>  	qp->bcms = desc->bcms;
>  	qp->num_bcms = desc->num_bcms;
> @@ -2208,12 +2209,6 @@ static int qnoc_probe(struct platform_device *pdev)
>  	if (IS_ERR(qp->voter))
>  		return PTR_ERR(qp->voter);
>  
> -	ret = icc_provider_add(provider);
> -	if (ret) {
> -		dev_err_probe(&pdev->dev, ret,
> -			      "error adding interconnect provider\n");
> -		return ret;
> -	}
>  
>  	for (i = 0; i < qp->num_bcms; i++)
>  		qcom_icc_bcm_init(qp->bcms[i], &pdev->dev);
> @@ -2227,7 +2222,7 @@ static int qnoc_probe(struct platform_device *pdev)
>  		node = icc_node_create(qnodes[i]->id);
>  		if (IS_ERR(node)) {
>  			ret = PTR_ERR(node);
> -			goto err;
> +			goto err_remove_nodes;
>  		}
>  
>  		node->name = qnodes[i]->name;
> @@ -2241,12 +2236,17 @@ static int qnoc_probe(struct platform_device *pdev)
>  	}
>  	data->num_nodes = num_nodes;
>  
> +	ret = icc_provider_register(provider);
> +	if (ret)
> +		goto err_remove_nodes;
> +
>  	platform_set_drvdata(pdev, qp);
>  
>  	return 0;
> -err:
> +
> +err_remove_nodes:
>  	icc_nodes_remove(provider);
> -	icc_provider_del(provider);
> +
>  	return ret;
>  }
>  
> @@ -2254,8 +2254,8 @@ static int qnoc_remove(struct platform_device *pdev)
>  {
>  	struct qcom_icc_provider *qp = platform_get_drvdata(pdev);
>  
> +	icc_provider_deregister(&qp->provider);
>  	icc_nodes_remove(&qp->provider);
> -	icc_provider_del(&qp->provider);
>  
>  	return 0;
>  }
> -- 
> 2.39.1
>