This patch series split from bellow series which pick-up spi relevant patches
https://lore.kernel.org/all/20230130030656.12127-1-xiangsheng.hou@mediatek.com.
This series add MediaTek MT7986 SPI NAND controller support, add read latch
latency, smaple delay adjust and add optional nfi_hclk.

Changes since V5:
 - Split spi relevant patches from previous series V4

Changes since V4:
 - none

Changes since V3:
 - none

Changes since V2:
 - Change snfi mediatek,rx-latch-latency to mediatek,rx-latch-latency-ns.

Changes since V1:
 - Use existing sample delay property.
 - Add restricting for optional nfi_hclk.
 - Improve and perfect dt-bindings documentation.

Xiangsheng Hou (5):
  spi: mtk-snfi: Change default page format to setup default setting
  spi: mtk-snfi: Add optional nfi_hclk which is needed for MT7986
  dt-bindings: spi: mtk-snfi: Add compatible for MT7986
  spi: mtk-snfi: Add snfi sample delay and read latency adjustment
  dt-bindings: spi: mtk-snfi: Add read latch latency property

 .../bindings/spi/mediatek,spi-mtk-snfi.yaml   | 54 +++++++++++++++----
 drivers/spi/spi-mtk-snfi.c                    | 41 +++++++++++++-
 2 files changed, 84 insertions(+), 11 deletions(-)

-- 
2.25.1

On Wed, 01 Feb 2023 10:09:16 +0800, Xiangsheng Hou wrote:
> This patch series split from bellow series which pick-up spi relevant patches
> https://lore.kernel.org/all/20230130030656.12127-1-xiangsheng.hou@mediatek.com.
> This series add MediaTek MT7986 SPI NAND controller support, add read latch
> latency, smaple delay adjust and add optional nfi_hclk.
> 
> Changes since V5:
>  - Split spi relevant patches from previous series V4
> 
> [...]

Applied to

   https://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi.git for-next

Thanks!

[1/5] spi: mtk-snfi: Change default page format to setup default setting
      commit: 2b1e19811a8ecc776d15da4ca89df48db6974d66
[2/5] spi: mtk-snfi: Add optional nfi_hclk which is needed for MT7986
      commit: e40fa328551dd67d14e5dc3e4ed82b5b770f027f
[3/5] dt-bindings: spi: mtk-snfi: Add compatible for MT7986
      commit: 8aa2ef233fa3b985ced1ed31b86fddddfd6be4b2
[4/5] spi: mtk-snfi: Add snfi sample delay and read latency adjustment
      commit: 1d36c99062bf4e809271cc534486342442508d4a
[5/5] dt-bindings: spi: mtk-snfi: Add read latch latency property
      commit: 351c02cb740472c659145b0027e77a3353e58185

All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.

You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying
to this mail.

Thanks,
Mark