1. Patchew
  2. linux
  3. View series

[PATCH v2] arm64: dts: renesas: v2mevk2: Add uSD card and eMMC support

Fabrizio Castro posted 1 patch 2 years, 7 months ago 
.../boot/dts/renesas/r9a09g011-v2mevk2.dts    | 124 ++++++++++++++++++
1 file changed, 124 insertions(+)
[PATCH v2] arm64: dts: renesas: v2mevk2: Add uSD card and eMMC support
Posted by Fabrizio Castro 2 years, 7 months ago 
The RZ/V2M EVK comes with a slot for a uSD card, and an eMMC.
Add support for the both of them.

Please note that the pinctrl driver for RZ/V2M doesn't support
interrupts yet, therefore the card detect pin has been connected
to the SDHI IP directly in this patch.
We'll connect the card detect pin to its corresponding GPIO when
we'll have driver support for interrupts in the RZ/V2M pinctrl
driver.

Signed-off-by: Fabrizio Castro <fabrizio.castro.jz@renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
---
v1->v2: Add properties no-sd; and no-sdio; to emmc node
	Moved emmc_pins to respect sort order
	Added Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>

 .../boot/dts/renesas/r9a09g011-v2mevk2.dts    | 124 ++++++++++++++++++
 1 file changed, 124 insertions(+)

diff --git a/arch/arm64/boot/dts/renesas/r9a09g011-v2mevk2.dts b/arch/arm64/boot/dts/renesas/r9a09g011-v2mevk2.dts
index d6737395df67..36a2afeb6c74 100644
--- a/arch/arm64/boot/dts/renesas/r9a09g011-v2mevk2.dts
+++ b/arch/arm64/boot/dts/renesas/r9a09g011-v2mevk2.dts
@@ -7,6 +7,7 @@
 
 /dts-v1/;
 #include "r9a09g011.dtsi"
+#include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/pinctrl/rzv2m-pinctrl.h>
 
 / {
@@ -35,6 +36,36 @@ memory@180000000 {
 		device_type = "memory";
 		reg = <0x1 0x80000000 0x0 0x80000000>;
 	};
+
+	reg_1v8: regulator-1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed-1.8V";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	reg_3v3: regulator-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed-3.3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	vccq_sdhi0: regulator-vccq-sdhi0 {
+		compatible = "regulator-gpio";
+
+		regulator-name = "SDHI0 VccQ";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpios = <&pwc 0 GPIO_ACTIVE_HIGH>;
+		gpios-states = <1>;
+		states = <3300000 0>, <1800000 1>;
+	};
 };
 
 &avb {
@@ -50,6 +81,24 @@ phy0: ethernet-phy@0 {
 	};
 };
 
+&emmc {
+	pinctrl-0 = <&emmc_pins>;
+	pinctrl-1 = <&emmc_pins>;
+	pinctrl-names = "default", "state_uhs";
+
+	vmmc-supply = <&reg_3v3>;
+	vqmmc-supply = <&reg_1v8>;
+	bus-width = <8>;
+	mmc-hs200-1_8v;
+	no-sd;
+	no-sdio;
+	non-removable;
+	fixed-emmc-driver-type = <1>;
+	max-frequency = <200000000>;
+	status = "okay";
+};
+
+
 &extal_clk {
 	clock-frequency = <48000000>;
 };
@@ -69,6 +118,26 @@ &i2c2 {
 };
 
 &pinctrl {
+	emmc_pins: emmc {
+		emmc_pins_data {
+			pinmux = <RZV2M_PORT_PINMUX(0, 0, 2)>, /* MMDAT0 */
+				 <RZV2M_PORT_PINMUX(0, 1, 2)>, /* MMDAT1 */
+				 <RZV2M_PORT_PINMUX(0, 2, 2)>, /* MMDAT2 */
+				 <RZV2M_PORT_PINMUX(0, 3, 2)>, /* MMDAT3 */
+				 <RZV2M_PORT_PINMUX(0, 4, 2)>, /* MMDAT4 */
+				 <RZV2M_PORT_PINMUX(0, 5, 2)>, /* MMDAT5 */
+				 <RZV2M_PORT_PINMUX(0, 6, 2)>, /* MMDAT6 */
+				 <RZV2M_PORT_PINMUX(0, 7, 2)>; /* MMDAT7 */
+			power-source = <1800>;
+		};
+
+		emmc_pins_ctrl {
+			pinmux = <RZV2M_PORT_PINMUX(0, 10, 2)>, /* MMCMD */
+				 <RZV2M_PORT_PINMUX(0, 11, 2)>; /* MMCLK */
+			power-source = <1800>;
+		};
+	};
+
 	i2c0_pins: i2c0 {
 		pinmux = <RZV2M_PORT_PINMUX(5, 0, 2)>, /* SDA */
 			 <RZV2M_PORT_PINMUX(5, 1, 2)>; /* SCL */
@@ -78,6 +147,48 @@ i2c2_pins: i2c2 {
 		pinmux = <RZV2M_PORT_PINMUX(3, 8, 2)>, /* SDA */
 			 <RZV2M_PORT_PINMUX(3, 9, 2)>; /* SCL */
 	};
+
+	sdhi0_pins: sd0 {
+		sd0_data {
+			pinmux = <RZV2M_PORT_PINMUX(8, 2, 1)>, /* SD0DAT0 */
+				 <RZV2M_PORT_PINMUX(8, 3, 1)>, /* SD0DAT1 */
+				 <RZV2M_PORT_PINMUX(8, 4, 1)>, /* SD0DAT2 */
+				 <RZV2M_PORT_PINMUX(8, 5, 1)>; /* SD0DAT3 */
+			power-source = <3300>;
+		};
+
+		sd0_ctrl {
+			pinmux = <RZV2M_PORT_PINMUX(8, 0, 1)>, /* SD0CMD */
+				 <RZV2M_PORT_PINMUX(8, 1, 1)>; /* SD0CLK */
+			power-source = <3300>;
+		};
+
+		sd0_cd {
+			pinmux = <RZV2M_PORT_PINMUX(8, 7, 1)>; /* SD0CD */
+			power-source = <3300>;
+		};
+	};
+
+	sdhi0_pins_uhs: sd0_uhs {
+		sd0_data_uhs {
+			pinmux = <RZV2M_PORT_PINMUX(8, 2, 1)>, /* SD0DAT0 */
+				 <RZV2M_PORT_PINMUX(8, 3, 1)>, /* SD0DAT1 */
+				 <RZV2M_PORT_PINMUX(8, 4, 1)>, /* SD0DAT2 */
+				 <RZV2M_PORT_PINMUX(8, 5, 1)>; /* SD0DAT3 */
+			power-source = <1800>;
+		};
+
+		sd0_ctrl_uhs {
+			pinmux = <RZV2M_PORT_PINMUX(8, 0, 1)>, /* SD0CMD */
+				 <RZV2M_PORT_PINMUX(8, 1, 1)>; /* SD0CLK */
+			power-source = <1800>;
+		};
+
+		sd0_cd_uhs {
+			pinmux = <RZV2M_PORT_PINMUX(8, 7, 1)>; /* SD0CD */
+			power-source = <1800>;
+		};
+	};
 };
 
 &pwc {
@@ -85,6 +196,19 @@ &pwc {
 	status = "okay";
 };
 
+&sdhi0 {
+	pinctrl-0 = <&sdhi0_pins>;
+	pinctrl-1 = <&sdhi0_pins_uhs>;
+	pinctrl-names = "default", "state_uhs";
+
+	vmmc-supply = <&reg_3v3>;
+	vqmmc-supply = <&vccq_sdhi0>;
+	bus-width = <4>;
+	sd-uhs-sdr50;
+	sd-uhs-sdr104;
+	status = "okay";
+};
+
 &uart0 {
 	status = "okay";
 };
-- 
2.34.1
Re: [PATCH v2] arm64: dts: renesas: v2mevk2: Add uSD card and eMMC support
Posted by Krzysztof Kozlowski 2 years, 7 months ago 
On 30/01/2023 20:11, Fabrizio Castro wrote:
> The RZ/V2M EVK comes with a slot for a uSD card, and an eMMC.
> Add support for the both of them.
> 
> Please note that the pinctrl driver for RZ/V2M doesn't support
> interrupts yet, therefore the card detect pin has been connected
> to the SDHI IP directly in this patch.
> We'll connect the card detect pin to its corresponding GPIO when
> we'll have driver support for interrupts in the RZ/V2M pinctrl
> driver.
> 
> Signed-off-by: Fabrizio Castro <fabrizio.castro.jz@renesas.com>
> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
> ---

> +
> +

Just one blank line

>  &extal_clk {
>  	clock-frequency = <48000000>;
>  };
> @@ -69,6 +118,26 @@ &i2c2 {
>  };
>  
>  &pinctrl {
> +	emmc_pins: emmc {
> +		emmc_pins_data {

No underscores in node names.

Best regards,
Krzysztof
Re: [PATCH v2] arm64: dts: renesas: v2mevk2: Add uSD card and eMMC support
Posted by Geert Uytterhoeven 2 years, 7 months ago 
On Thu, Feb 2, 2023 at 9:48 AM Krzysztof Kozlowski
<krzysztof.kozlowski@linaro.org> wrote:
> On 30/01/2023 20:11, Fabrizio Castro wrote:
> > The RZ/V2M EVK comes with a slot for a uSD card, and an eMMC.
> > Add support for the both of them.
> >
> > Please note that the pinctrl driver for RZ/V2M doesn't support
> > interrupts yet, therefore the card detect pin has been connected
> > to the SDHI IP directly in this patch.
> > We'll connect the card detect pin to its corresponding GPIO when
> > we'll have driver support for interrupts in the RZ/V2M pinctrl
> > driver.
> >
> > Signed-off-by: Fabrizio Castro <fabrizio.castro.jz@renesas.com>
> > Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
> > ---
>
> > +
> > +
>
> Just one blank line

Fixing...

> >  &extal_clk {
> >       clock-frequency = <48000000>;
> >  };
> > @@ -69,6 +118,26 @@ &i2c2 {
> >  };
> >
> >  &pinctrl {
> > +     emmc_pins: emmc {
> > +             emmc_pins_data {
>
> No underscores in node names.

... and renaming to "data" etc. while queuing in renesas-devel for v6.4.

Gr{oetje,eeting}s,

                        Geert

-- 
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds

Patchew 2.1-devel-b67e4c2

© 2016 - 2025 Red Hat, Inc.