1. Patchew
  2. linux
  3. View series

[PATCH] x86/tdx: Do not corrupt frame-pointer in __tdx_hypercall()

Kirill A. Shutemov posted 1 patch 2 years, 7 months ago
There is a newer version of this series
arch/x86/coco/tdx/tdcall.S | 12 ++++++------
1 file changed, 6 insertions(+), 6 deletions(-)
[PATCH] x86/tdx: Do not corrupt frame-pointer in __tdx_hypercall()
Posted by Kirill A. Shutemov 2 years, 7 months ago 
If compiled with CONFIG_FRAME_POINTER=y, objtool in not happy that
__tdx_hypercall() messes up RBP.

  objtool: __tdx_hypercall+0x7f: return with modified stack frame

Rework the function to store TDX_HCALL_ flags on stack instead of RBP.

Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Fixes: c30c4b2555ba ("x86/tdx: Refactor __tdx_hypercall() to allow pass down more arguments")
Link: https://lore.kernel.org/all/202301290255.buUBs99R-lkp@intel.com
Reported-by: kernel test robot <lkp@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
---

The patch is against tip/x86/tdx. tip/sched/core removes
TDX_HCALL_ISSUE_STI. The trird hunk of the patch is not relevant
after that.

---
 arch/x86/coco/tdx/tdcall.S | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

diff --git a/arch/x86/coco/tdx/tdcall.S b/arch/x86/coco/tdx/tdcall.S
index 5da06d1a9ba3..2bd436a4790d 100644
--- a/arch/x86/coco/tdx/tdcall.S
+++ b/arch/x86/coco/tdx/tdcall.S
@@ -131,11 +131,10 @@ SYM_FUNC_START(__tdx_hypercall)
 	push %r13
 	push %r12
 	push %rbx
-	push %rbp
 
 	/* Free RDI and RSI to be used as TDVMCALL arguments */
 	movq %rdi, %rax
-	movq %rsi, %rbp
+	push %rsi
 
 	/* Copy hypercall registers from arg struct: */
 	movq TDX_HYPERCALL_r8(%rax),  %r8
@@ -168,7 +167,7 @@ SYM_FUNC_START(__tdx_hypercall)
 	 * HLT operation indefinitely. Since this is the not the desired
 	 * result, conditionally call STI before TDCALL.
 	 */
-	testq $TDX_HCALL_ISSUE_STI, %rbp
+	testq $TDX_HCALL_ISSUE_STI, 8(%rsp)
 	jz .Lskip_sti
 	sti
 .Lskip_sti:
@@ -188,7 +187,7 @@ SYM_FUNC_START(__tdx_hypercall)
 	pop %rax
 
 	/* Copy hypercall result registers to arg struct if needed */
-	testq $TDX_HCALL_HAS_OUTPUT, %rbp
+	testq $TDX_HCALL_HAS_OUTPUT, (%rsp)
 	jz .Lout
 
 	movq %r8,  TDX_HYPERCALL_r8(%rax)
@@ -218,11 +217,12 @@ SYM_FUNC_START(__tdx_hypercall)
 	xor %r10d, %r10d
 	xor %r11d, %r11d
 	xor %rdi,  %rdi
-	xor %rsi,  %rsi
 	xor %rdx,  %rdx
 
+	/* Remove TDX_HCALL_* flags from the stack */
+	pop %rsi
+
 	/* Restore callee-saved GPRs as mandated by the x86_64 ABI */
-	pop %rbp
 	pop %rbx
 	pop %r12
 	pop %r13
-- 
2.39.1
Re: [PATCH] x86/tdx: Do not corrupt frame-pointer in __tdx_hypercall()
Posted by Peter Zijlstra 2 years, 7 months ago 
On Mon, Jan 30, 2023 at 04:53:54PM +0300, Kirill A. Shutemov wrote:
> If compiled with CONFIG_FRAME_POINTER=y, objtool in not happy that
> __tdx_hypercall() messes up RBP.
> 
>   objtool: __tdx_hypercall+0x7f: return with modified stack frame
> 
> Rework the function to store TDX_HCALL_ flags on stack instead of RBP.

Also, on IRC you mentioned that per TDX spec, BP is a valid argument
register too and you were going to raise this and get it fixed, TDX
hypercalls must not use BP to pass data.
Re: [PATCH] x86/tdx: Do not corrupt frame-pointer in __tdx_hypercall()
Posted by Kirill A. Shutemov 2 years, 7 months ago 
On Tue, Jan 31, 2023 at 09:34:12AM +0100, Peter Zijlstra wrote:
> On Mon, Jan 30, 2023 at 04:53:54PM +0300, Kirill A. Shutemov wrote:
> > If compiled with CONFIG_FRAME_POINTER=y, objtool in not happy that
> > __tdx_hypercall() messes up RBP.
> > 
> >   objtool: __tdx_hypercall+0x7f: return with modified stack frame
> > 
> > Rework the function to store TDX_HCALL_ flags on stack instead of RBP.
> 
> Also, on IRC you mentioned that per TDX spec, BP is a valid argument
> register too and you were going to raise this and get it fixed, TDX
> hypercalls must not use BP to pass data.

I've raised the question yesterday. No progress so far. It will take time
to get it into the public spec.

-- 
  Kiryl Shutsemau / Kirill A. Shutemov
Re: [PATCH] x86/tdx: Do not corrupt frame-pointer in __tdx_hypercall()
Posted by Peter Zijlstra 2 years, 7 months ago 
On Tue, Jan 31, 2023 at 11:39:01AM +0300, Kirill A. Shutemov wrote:
> On Tue, Jan 31, 2023 at 09:34:12AM +0100, Peter Zijlstra wrote:
> > On Mon, Jan 30, 2023 at 04:53:54PM +0300, Kirill A. Shutemov wrote:
> > > If compiled with CONFIG_FRAME_POINTER=y, objtool in not happy that
> > > __tdx_hypercall() messes up RBP.
> > > 
> > >   objtool: __tdx_hypercall+0x7f: return with modified stack frame
> > > 
> > > Rework the function to store TDX_HCALL_ flags on stack instead of RBP.
> > 
> > Also, on IRC you mentioned that per TDX spec, BP is a valid argument
> > register too and you were going to raise this and get it fixed, TDX
> > hypercalls must not use BP to pass data.
> 
> I've raised the question yesterday. No progress so far. It will take time
> to get it into the public spec.

Sure, just making sure it's not forgotten about. Thanks!
Re: [PATCH] x86/tdx: Do not corrupt frame-pointer in __tdx_hypercall()
Posted by Peter Zijlstra 2 years, 7 months ago 
On Mon, Jan 30, 2023 at 04:53:54PM +0300, Kirill A. Shutemov wrote:
> If compiled with CONFIG_FRAME_POINTER=y, objtool in not happy that
> __tdx_hypercall() messes up RBP.
> 
>   objtool: __tdx_hypercall+0x7f: return with modified stack frame
> 
> Rework the function to store TDX_HCALL_ flags on stack instead of RBP.
> 
> Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
> Fixes: c30c4b2555ba ("x86/tdx: Refactor __tdx_hypercall() to allow pass down more arguments")
> Link: https://lore.kernel.org/all/202301290255.buUBs99R-lkp@intel.com
> Reported-by: kernel test robot <lkp@intel.com>
> Cc: Peter Zijlstra <peterz@infradead.org>
> ---
> 
> The patch is against tip/x86/tdx. tip/sched/core removes
> TDX_HCALL_ISSUE_STI. The trird hunk of the patch is not relevant
> after that.

Right, this should work. But it does leave me wondering, should we
perhaps strive to completely remove the flags thing and move to
__tdx_hypercall() and __tdx_hypercall_ret() or something? That is,
simply have two different functions, one with and one without return
data.

It should be trivial to generate that without actual code duplication.
Re: [PATCH] x86/tdx: Do not corrupt frame-pointer in __tdx_hypercall()
Posted by Kirill A. Shutemov 2 years, 7 months ago 
On Tue, Jan 31, 2023 at 09:32:37AM +0100, Peter Zijlstra wrote:
> On Mon, Jan 30, 2023 at 04:53:54PM +0300, Kirill A. Shutemov wrote:
> > If compiled with CONFIG_FRAME_POINTER=y, objtool in not happy that

Oops, just noticed a typo. s/in/is/

> > __tdx_hypercall() messes up RBP.
> > 
> >   objtool: __tdx_hypercall+0x7f: return with modified stack frame
> > 
> > Rework the function to store TDX_HCALL_ flags on stack instead of RBP.
> > 
> > Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
> > Fixes: c30c4b2555ba ("x86/tdx: Refactor __tdx_hypercall() to allow pass down more arguments")
> > Link: https://lore.kernel.org/all/202301290255.buUBs99R-lkp@intel.com
> > Reported-by: kernel test robot <lkp@intel.com>
> > Cc: Peter Zijlstra <peterz@infradead.org>
> > ---
> > 
> > The patch is against tip/x86/tdx. tip/sched/core removes
> > TDX_HCALL_ISSUE_STI. The trird hunk of the patch is not relevant
> > after that.
> 
> Right, this should work. But it does leave me wondering, should we
> perhaps strive to completely remove the flags thing and move to
> __tdx_hypercall() and __tdx_hypercall_ret() or something? That is,
> simply have two different functions, one with and one without return
> data.
> 
> It should be trivial to generate that without actual code duplication.

Yeah, that's doable. I will give it a try. I guess on top this one (plus
sched/core changes) should be.

-- 
  Kiryl Shutsemau / Kirill A. Shutemov

Patchew 2.1-devel-b67e4c2

© 2016 - 2025 Red Hat, Inc.