If the sensor doens't power up correctly, for example due to incorrect
devicetree description, the power up i2c writes will fail.

Add an error print for this situation.

Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
---
 drivers/media/i2c/ov2685.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/media/i2c/ov2685.c b/drivers/media/i2c/ov2685.c
index a422f4c8a2eb..844a91dbc8e5 100644
--- a/drivers/media/i2c/ov2685.c
+++ b/drivers/media/i2c/ov2685.c
@@ -419,8 +419,10 @@ static int __ov2685_power_on(struct ov2685 *ov2685)
 	 * writing register before .s_stream() as a workaround
 	 */
 	ret = ov2685_write_array(ov2685->client, ov2685->cur_mode->reg_list);
-	if (ret)
+	if (ret) {
+		dev_err(dev, "Failed to set regs for power on\n");
 		goto disable_supplies;
+	}
 
 	return 0;
 

-- 
2.39.1