Hi Luca,
On Sun, Jan 29, 2023 at 10:42:37AM +0100, Luca Weiss wrote:
> Add V4L2_CID_CAMERA_ORIENTATION and V4L2_CID_CAMERA_SENSOR_ROTATION
> controls to the ov2685 driver by attempting to parse them from firmware.
>
> Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
> ---
> drivers/media/i2c/ov2685.c | 11 +++++++++++
> 1 file changed, 11 insertions(+)
>
> diff --git a/drivers/media/i2c/ov2685.c b/drivers/media/i2c/ov2685.c
> index 844a91dbc8e5..bfced11b178b 100644
> --- a/drivers/media/i2c/ov2685.c
> +++ b/drivers/media/i2c/ov2685.c
> @@ -17,6 +17,7 @@
> #include <media/media-entity.h>
> #include <media/v4l2-async.h>
> #include <media/v4l2-ctrls.h>
> +#include <media/v4l2-fwnode.h>
> #include <media/v4l2-subdev.h>
>
> #define CHIP_ID 0x2685
> @@ -613,6 +614,7 @@ static int ov2685_initialize_controls(struct ov2685 *ov2685)
> const struct ov2685_mode *mode;
> struct v4l2_ctrl_handler *handler;
> struct v4l2_ctrl *ctrl;
> + struct v4l2_fwnode_device_properties props;
> u64 exposure_max;
> u32 pixel_rate, h_blank;
> int ret;
> @@ -661,6 +663,15 @@ static int ov2685_initialize_controls(struct ov2685 *ov2685)
> ARRAY_SIZE(ov2685_test_pattern_menu) - 1,
> 0, 0, ov2685_test_pattern_menu);
>
As the below function can register up to 2 controls, you should also
reserve space for them when initializing the control handler to avoid
relocations
- ret = v4l2_ctrl_handler_init(handler, 8);
+ ret = v4l2_ctrl_handler_init(handler, 10);
> + /* set properties from fwnode (e.g. rotation, orientation) */
> + ret = v4l2_fwnode_device_parse(&ov2685->client->dev, &props);
> + if (ret)
> + goto err_free_handler;
> +
> + ret = v4l2_ctrl_new_fwnode_properties(handler, &ov2685_ctrl_ops, &props);
> + if (ret)
> + goto err_free_handler;
> +
> if (handler->error) {
> ret = handler->error;
> dev_err(&ov2685->client->dev,
>
> --
> 2.39.1
>