Document STM32 System Bus. This bus is intended to control firewall
access for the peripherals connected to it.
Signed-off-by: Gatien Chevallier <gatien.chevallier@foss.st.com>
Signed-off-by: Loic PALLARDY <loic.pallardy@st.com>
---
Changes in V2:
- Corrected errors highlighted by Rob's robot
- Re-ordered Signed-off-by tags
Changes in V3:
- Correct #feature-domain-cells
- Declare 1 as minimum number of arguments for feature-domains property
in bus subnodes and 3 as maximum.
- Change example to be a real usecase.
.../devicetree/bindings/bus/st,sys-bus.yaml | 127 ++++++++++++++++++
1 file changed, 127 insertions(+)
create mode 100644 Documentation/devicetree/bindings/bus/st,sys-bus.yaml
diff --git a/Documentation/devicetree/bindings/bus/st,sys-bus.yaml b/Documentation/devicetree/bindings/bus/st,sys-bus.yaml
new file mode 100644
index 000000000000..c1510784b79b
--- /dev/null
+++ b/Documentation/devicetree/bindings/bus/st,sys-bus.yaml
@@ -0,0 +1,127 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/bus/st,sys-bus.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: STM32 System Bus
+
+description: |
+ The STM32 System Bus is an internal bus to which some internal peripherals
+ are connected. STM32 System Bus integrates a firewall controlling access to each
+ device. This bus prevents non-accessible devices to be probed.
+
+ To see which peripherals are securable, please check the SoC reference manual.
+
+maintainers:
+ - Gatien Chevallier <gatien.chevallier@foss.st.com>
+
+allOf:
+ - $ref: /schemas/feature-controllers/feature-domain-controller.yaml#
+
+properties:
+ compatible:
+ enum:
+ - st,stm32mp13-sys-bus
+ - st,stm32mp15-sys-bus
+
+ reg:
+ maxItems: 1
+
+ "#address-cells":
+ const: 1
+
+ "#size-cells":
+ const: 1
+
+ "#feature-domain-cells":
+ const: 1
+
+ ranges: true
+
+ feature-domain-controller: true
+
+patternProperties:
+ "^.*@[0-9a-f]+$":
+ description: Devices attached to system bus
+ type: object
+ properties:
+ feature-domains:
+ $ref: /schemas/feature-controllers/feature-domain-controller.yaml#/properties/feature-domains
+ minItems: 1
+ maxItems: 3
+
+required:
+ - compatible
+ - reg
+ - "#address-cells"
+ - "#size-cells"
+ - feature-domain-controller
+ - "#feature-domain-cells"
+ - ranges
+
+additionalProperties: false
+
+examples:
+ - |
+ // In this example, the rng1 device refers to etzpc as its domain controller.
+ // Same goes for fmc.
+ // Access rights are verified before creating devices.
+
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/clock/stm32mp1-clks.h>
+ #include <dt-bindings/reset/stm32mp1-resets.h>
+
+ etzpc: bus@5c007000 {
+ compatible = "st,stm32mp15-sys-bus";
+ reg = <0x5c007000 0x400>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+ feature-domain-controller;
+ #feature-domain-cells = <1>;
+
+ rng1: rng@54003000 {
+ compatible = "st,stm32-rng";
+ reg = <0x54003000 0x400>;
+ clocks = <&rcc RNG1_K>;
+ resets = <&rcc RNG1_R>;
+ feature-domains = <&etzpc 7>;
+ status = "disabled";
+ };
+
+ fmc: memory-controller@58002000 {
+ #address-cells = <2>;
+ #size-cells = <1>;
+ compatible = "st,stm32mp1-fmc2-ebi";
+ reg = <0x58002000 0x1000>;
+ clocks = <&rcc FMC_K>;
+ resets = <&rcc FMC_R>;
+ feature-domains = <&etzpc 91>;
+ status = "disabled";
+
+ ranges = <0 0 0x60000000 0x04000000>, /* EBI CS 1 */
+ <1 0 0x64000000 0x04000000>, /* EBI CS 2 */
+ <2 0 0x68000000 0x04000000>, /* EBI CS 3 */
+ <3 0 0x6c000000 0x04000000>, /* EBI CS 4 */
+ <4 0 0x80000000 0x10000000>; /* NAND */
+
+ nand-controller@4,0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "st,stm32mp1-fmc2-nfc";
+ reg = <4 0x00000000 0x1000>,
+ <4 0x08010000 0x1000>,
+ <4 0x08020000 0x1000>,
+ <4 0x01000000 0x1000>,
+ <4 0x09010000 0x1000>,
+ <4 0x09020000 0x1000>;
+ interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&mdma1 20 0x2 0x12000a02 0x0 0x0>,
+ <&mdma1 20 0x2 0x12000a08 0x0 0x0>,
+ <&mdma1 21 0x2 0x12000a0a 0x0 0x0>;
+ dma-names = "tx", "rx", "ecc";
+ status = "disabled";
+ };
+ };
+ };
--
2.35.3On Fri, 27 Jan 2023 17:40:37 +0100
Gatien Chevallier <gatien.chevallier@foss.st.com> wrote:
> Document STM32 System Bus. This bus is intended to control firewall
> access for the peripherals connected to it.
>
> Signed-off-by: Gatien Chevallier <gatien.chevallier@foss.st.com>
> Signed-off-by: Loic PALLARDY <loic.pallardy@st.com>
Trivial comment on formatting.
> +
> +examples:
> + - |
> + // In this example, the rng1 device refers to etzpc as its domain controller.
> + // Same goes for fmc.
> + // Access rights are verified before creating devices.
> +
> + #include <dt-bindings/interrupt-controller/arm-gic.h>
> + #include <dt-bindings/clock/stm32mp1-clks.h>
> + #include <dt-bindings/reset/stm32mp1-resets.h>
> +
> + etzpc: bus@5c007000 {
> + compatible = "st,stm32mp15-sys-bus";
> + reg = <0x5c007000 0x400>;
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges;
> + feature-domain-controller;
> + #feature-domain-cells = <1>;
> +
> + rng1: rng@54003000 {
Odd mixture of 4 spacing and 2 spacing in this example.
I'd suggest one or the other (slight preference for 4 space indents).
> + compatible = "st,stm32-rng";
> + reg = <0x54003000 0x400>;
> + clocks = <&rcc RNG1_K>;
> + resets = <&rcc RNG1_R>;
> + feature-domains = <&etzpc 7>;
> + status = "disabled";
> + };
Hello Jonathan,
On 1/28/23 16:48, Jonathan Cameron wrote:
> On Fri, 27 Jan 2023 17:40:37 +0100
> Gatien Chevallier <gatien.chevallier@foss.st.com> wrote:
>
>> Document STM32 System Bus. This bus is intended to control firewall
>> access for the peripherals connected to it.
>>
>> Signed-off-by: Gatien Chevallier <gatien.chevallier@foss.st.com>
>> Signed-off-by: Loic PALLARDY <loic.pallardy@st.com>
> Trivial comment on formatting.
>
>> +
>> +examples:
>> + - |
>> + // In this example, the rng1 device refers to etzpc as its domain controller.
>> + // Same goes for fmc.
>> + // Access rights are verified before creating devices.
>> +
>> + #include <dt-bindings/interrupt-controller/arm-gic.h>
>> + #include <dt-bindings/clock/stm32mp1-clks.h>
>> + #include <dt-bindings/reset/stm32mp1-resets.h>
>> +
>> + etzpc: bus@5c007000 {
>> + compatible = "st,stm32mp15-sys-bus";
>> + reg = <0x5c007000 0x400>;
>> + #address-cells = <1>;
>> + #size-cells = <1>;
>> + ranges;
>> + feature-domain-controller;
>> + #feature-domain-cells = <1>;
>> +
>> + rng1: rng@54003000 {
>
> Odd mixture of 4 spacing and 2 spacing in this example.
> I'd suggest one or the other (slight preference for 4 space indents).
>
Thank you for spotting this, I'll change to 4 space indents
>
>> + compatible = "st,stm32-rng";
>> + reg = <0x54003000 0x400>;
>> + clocks = <&rcc RNG1_K>;
>> + resets = <&rcc RNG1_R>;
>> + feature-domains = <&etzpc 7>;
>> + status = "disabled";
>> + };
Best regards,
Gatien
© 2016 - 2025 Red Hat, Inc.