From: Arnd Bergmann <arnd@arndb.de>
gpio_set_debounce() only has a single user, which is trivially
converted to gpiod_set_debounce().
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
---
Documentation/driver-api/gpio/legacy.rst | 2 --
.../zh_CN/driver-api/gpio/legacy.rst | 1 -
Documentation/translations/zh_TW/gpio.txt | 1 -
drivers/input/touchscreen/ads7846.c | 25 ++++++++++---------
include/linux/gpio.h | 10 --------
5 files changed, 13 insertions(+), 26 deletions(-)
diff --git a/Documentation/driver-api/gpio/legacy.rst b/Documentation/driver-api/gpio/legacy.rst
index a0559d93efd1..e0306e78e34b 100644
--- a/Documentation/driver-api/gpio/legacy.rst
+++ b/Documentation/driver-api/gpio/legacy.rst
@@ -238,8 +238,6 @@ setup or driver probe/teardown code, so this is an easy constraint.)::
## gpio_free_array()
gpio_free()
- gpio_set_debounce()
-
Claiming and Releasing GPIOs
diff --git a/Documentation/translations/zh_CN/driver-api/gpio/legacy.rst b/Documentation/translations/zh_CN/driver-api/gpio/legacy.rst
index 74fa473bb504..dee2a0517c1c 100644
--- a/Documentation/translations/zh_CN/driver-api/gpio/legacy.rst
+++ b/Documentation/translations/zh_CN/driver-api/gpio/legacy.rst
@@ -219,7 +219,6 @@ GPIO 值的命令需要等待其信息排到队首才发送命令，再获得其
## gpio_free_array()
gpio_free()
- gpio_set_debounce()
diff --git a/Documentation/translations/zh_TW/gpio.txt b/Documentation/translations/zh_TW/gpio.txt
index 1b986bbb0909..dc608358d90a 100644
--- a/Documentation/translations/zh_TW/gpio.txt
+++ b/Documentation/translations/zh_TW/gpio.txt
@@ -226,7 +226,6 @@ GPIO 值的命令需要等待其信息排到隊首才發送命令，再獲得其
## gpio_free_array()
gpio_free()
- gpio_set_debounce()
diff --git a/drivers/input/touchscreen/ads7846.c b/drivers/input/touchscreen/ads7846.c
index 4c3dd01902d0..da3c55d9cb98 100644
--- a/drivers/input/touchscreen/ads7846.c
+++ b/drivers/input/touchscreen/ads7846.c
@@ -25,8 +25,8 @@
#include <linux/slab.h>
#include <linux/pm.h>
#include <linux/of.h>
-#include <linux/of_gpio.h>
#include <linux/of_device.h>
+#include <linux/gpio/consumer.h>
#include <linux/gpio.h>
#include <linux/spi/spi.h>
#include <linux/spi/ads7846.h>
@@ -139,7 +139,7 @@ struct ads7846 {
int (*filter)(void *data, int data_idx, int *val);
void *filter_data;
int (*get_pendown_state)(void);
- int gpio_pendown;
+ struct gpio_desc *gpio_pendown;
void (*wait_for_sync)(void);
};
@@ -222,7 +222,7 @@ static int get_pendown_state(struct ads7846 *ts)
if (ts->get_pendown_state)
return ts->get_pendown_state();
- return !gpio_get_value(ts->gpio_pendown);
+ return !gpiod_get_value(ts->gpio_pendown);
}
static void ads7846_report_pen_up(struct ads7846 *ts)
@@ -1005,7 +1005,6 @@ static int ads7846_setup_pendown(struct spi_device *spi,
if (pdata->get_pendown_state) {
ts->get_pendown_state = pdata->get_pendown_state;
} else if (gpio_is_valid(pdata->gpio_pendown)) {
-
err = devm_gpio_request_one(&spi->dev, pdata->gpio_pendown,
GPIOF_IN, "ads7846_pendown");
if (err) {
@@ -1015,15 +1014,17 @@ static int ads7846_setup_pendown(struct spi_device *spi,
return err;
}
- ts->gpio_pendown = pdata->gpio_pendown;
-
- if (pdata->gpio_pendown_debounce)
- gpio_set_debounce(pdata->gpio_pendown,
- pdata->gpio_pendown_debounce);
+ ts->gpio_pendown = gpio_to_desc(pdata->gpio_pendown);
} else {
- dev_err(&spi->dev, "no get_pendown_state nor gpio_pendown?\n");
- return -EINVAL;
+ ts->gpio_pendown = gpiod_get(&spi->dev, "pendown-gpio", GPIOD_IN);
+ if (IS_ERR(ts->gpio_pendown)) {
+ dev_err(&spi->dev, "no get_pendown_state nor gpio_pendown?\n");
+ return PTR_ERR(ts->gpio_pendown);
+ }
}
+ if (pdata->gpio_pendown_debounce)
+ gpiod_set_debounce(ts->gpio_pendown,
+ pdata->gpio_pendown_debounce);
return 0;
}
@@ -1192,7 +1193,7 @@ static const struct ads7846_platform_data *ads7846_probe_dt(struct device *dev)
pdata->wakeup = of_property_read_bool(node, "wakeup-source") ||
of_property_read_bool(node, "linux,wakeup");
- pdata->gpio_pendown = of_get_named_gpio(dev->of_node, "pendown-gpio", 0);
+ pdata->gpio_pendown = -1;
return pdata;
}
diff --git a/include/linux/gpio.h b/include/linux/gpio.h
index 6719a82eeec5..220e8656f2ab 100644
--- a/include/linux/gpio.h
+++ b/include/linux/gpio.h
@@ -100,11 +100,6 @@ static inline int gpio_direction_output(unsigned gpio, int value)
return gpiod_direction_output_raw(gpio_to_desc(gpio), value);
}
-static inline int gpio_set_debounce(unsigned gpio, unsigned debounce)
-{
- return gpiod_set_debounce(gpio_to_desc(gpio), debounce);
-}
-
static inline int gpio_get_value_cansleep(unsigned gpio)
{
return gpiod_get_raw_value_cansleep(gpio_to_desc(gpio));
@@ -215,11 +210,6 @@ static inline int gpio_direction_output(unsigned gpio, int value)
return -ENOSYS;
}
-static inline int gpio_set_debounce(unsigned gpio, unsigned debounce)
-{
- return -ENOSYS;
-}
-
static inline int gpio_get_value(unsigned gpio)
{
/* GPIO can never have been requested or set as {in,out}put */
--
2.39.0
On Fri, Jan 27, 2023 at 11:11:46AM +0100, Arnd Bergmann wrote:
> From: Arnd Bergmann <arnd@arndb.de>
>
> gpio_set_debounce() only has a single user, which is trivially
> converted to gpiod_set_debounce().
>
> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
> ---
> Documentation/driver-api/gpio/legacy.rst | 2 --
> .../zh_CN/driver-api/gpio/legacy.rst | 1 -
> Documentation/translations/zh_TW/gpio.txt | 1 -
> drivers/input/touchscreen/ads7846.c | 25 ++++++++++---------
> include/linux/gpio.h | 10 --------
> 5 files changed, 13 insertions(+), 26 deletions(-)
>
> diff --git a/Documentation/driver-api/gpio/legacy.rst b/Documentation/driver-api/gpio/legacy.rst
> index a0559d93efd1..e0306e78e34b 100644
> --- a/Documentation/driver-api/gpio/legacy.rst
> +++ b/Documentation/driver-api/gpio/legacy.rst
> @@ -238,8 +238,6 @@ setup or driver probe/teardown code, so this is an easy constraint.)::
> ## gpio_free_array()
>
> gpio_free()
> - gpio_set_debounce()
> -
>
>
> Claiming and Releasing GPIOs
> diff --git a/Documentation/translations/zh_CN/driver-api/gpio/legacy.rst b/Documentation/translations/zh_CN/driver-api/gpio/legacy.rst
> index 74fa473bb504..dee2a0517c1c 100644
> --- a/Documentation/translations/zh_CN/driver-api/gpio/legacy.rst
> +++ b/Documentation/translations/zh_CN/driver-api/gpio/legacy.rst
> @@ -219,7 +219,6 @@ GPIO 值的命令需要等待其信息排到队首才发送命令，再获得其
> ## gpio_free_array()
>
> gpio_free()
> - gpio_set_debounce()
>
>
>
> diff --git a/Documentation/translations/zh_TW/gpio.txt b/Documentation/translations/zh_TW/gpio.txt
> index 1b986bbb0909..dc608358d90a 100644
> --- a/Documentation/translations/zh_TW/gpio.txt
> +++ b/Documentation/translations/zh_TW/gpio.txt
> @@ -226,7 +226,6 @@ GPIO 值的命令需要等待其信息排到隊首才發送命令，再獲得其
> ## gpio_free_array()
>
> gpio_free()
> - gpio_set_debounce()
>
>
>
> diff --git a/drivers/input/touchscreen/ads7846.c b/drivers/input/touchscreen/ads7846.c
> index 4c3dd01902d0..da3c55d9cb98 100644
> --- a/drivers/input/touchscreen/ads7846.c
> +++ b/drivers/input/touchscreen/ads7846.c
> @@ -25,8 +25,8 @@
> #include <linux/slab.h>
> #include <linux/pm.h>
> #include <linux/of.h>
> -#include <linux/of_gpio.h>
> #include <linux/of_device.h>
> +#include <linux/gpio/consumer.h>
> #include <linux/gpio.h>
> #include <linux/spi/spi.h>
> #include <linux/spi/ads7846.h>
> @@ -139,7 +139,7 @@ struct ads7846 {
> int (*filter)(void *data, int data_idx, int *val);
> void *filter_data;
> int (*get_pendown_state)(void);
> - int gpio_pendown;
> + struct gpio_desc *gpio_pendown;
>
> void (*wait_for_sync)(void);
> };
> @@ -222,7 +222,7 @@ static int get_pendown_state(struct ads7846 *ts)
> if (ts->get_pendown_state)
> return ts->get_pendown_state();
>
> - return !gpio_get_value(ts->gpio_pendown);
> + return !gpiod_get_value(ts->gpio_pendown);
No, we can not blindly do that without checking annotations on GPIOs.
> + ts->gpio_pendown = gpiod_get(&spi->dev, "pendown-gpio", GPIOD_IN);
Wrong name, you will be looking for "pendown-gpio-gpios".
Sorry, but I have to NAK this in the current form.
Thanks.
--
Dmitry
On Tue, Jan 31, 2023 at 09:44:31PM -0800, Dmitry Torokhov wrote: > On Fri, Jan 27, 2023 at 11:11:46AM +0100, Arnd Bergmann wrote: ... > > - return !gpio_get_value(ts->gpio_pendown); > > + return !gpiod_get_value(ts->gpio_pendown); > > No, we can not blindly do that without checking annotations on GPIOs. But this is easy to fix, i.e. use raw API, no? > > + ts->gpio_pendown = gpiod_get(&spi->dev, "pendown-gpio", GPIOD_IN); > > Wrong name, you will be looking for "pendown-gpio-gpios". > > Sorry, but I have to NAK this in the current form. Oh, indeed. On top of that the conversion missing the label to be set. -- With Best Regards, Andy Shevchenko
On Wed, Feb 01, 2023 at 08:32:06PM +0200, Andy Shevchenko wrote: > On Tue, Jan 31, 2023 at 09:44:31PM -0800, Dmitry Torokhov wrote: > > On Fri, Jan 27, 2023 at 11:11:46AM +0100, Arnd Bergmann wrote: > > ... > > > > - return !gpio_get_value(ts->gpio_pendown); > > > + return !gpiod_get_value(ts->gpio_pendown); > > > > No, we can not blindly do that without checking annotations on GPIOs. > > But this is easy to fix, i.e. use raw API, no? I'd rather not (I hope I can make this driver respect declared polarity at some point), so for debounce we could do: gpiod_set_debounce(gpio_to_gpiod(), ...); in ads7846 for now, and get rid of gpio_set_debounce() as a publc API. Thanks. -- Dmitry
On Wed, Feb 01, 2023 at 11:07:35AM -0800, Dmitry Torokhov wrote: > On Wed, Feb 01, 2023 at 08:32:06PM +0200, Andy Shevchenko wrote: > > On Tue, Jan 31, 2023 at 09:44:31PM -0800, Dmitry Torokhov wrote: > > > On Fri, Jan 27, 2023 at 11:11:46AM +0100, Arnd Bergmann wrote: ... > > > > - return !gpio_get_value(ts->gpio_pendown); > > > > + return !gpiod_get_value(ts->gpio_pendown); > > > > > > No, we can not blindly do that without checking annotations on GPIOs. > > > > But this is easy to fix, i.e. use raw API, no? > > I'd rather not (I hope I can make this driver respect declared polarity > at some point), so for debounce we could do: > > gpiod_set_debounce(gpio_to_gpiod(), ...); > > in ads7846 for now, and get rid of gpio_set_debounce() as a publc API. This will work and we can keep it for a while (gpio_to_desc(), I believe you meant this one, is part of the new API to keep this bridge for the cases like this). Arnd, are you going to send a v3? It would be really nice to have less collisions next cycle if your series is applied. -- With Best Regards, Andy Shevchenko
On Tue, Feb 7, 2023, at 12:25, Andy Shevchenko wrote:
> On Wed, Feb 01, 2023 at 11:07:35AM -0800, Dmitry Torokhov wrote:
>> On Wed, Feb 01, 2023 at 08:32:06PM +0200, Andy Shevchenko wrote:
>> > On Tue, Jan 31, 2023 at 09:44:31PM -0800, Dmitry Torokhov wrote:
>> > > On Fri, Jan 27, 2023 at 11:11:46AM +0100, Arnd Bergmann wrote:
>
> ...
>
>> > > > - return !gpio_get_value(ts->gpio_pendown);
>> > > > + return !gpiod_get_value(ts->gpio_pendown);
>> > >
>> > > No, we can not blindly do that without checking annotations on GPIOs.
>> >
>> > But this is easy to fix, i.e. use raw API, no?
>>
>> I'd rather not (I hope I can make this driver respect declared polarity
>> at some point), so for debounce we could do:
>>
>> gpiod_set_debounce(gpio_to_gpiod(), ...);
>>
>> in ads7846 for now, and get rid of gpio_set_debounce() as a publc API.
>
> This will work and we can keep it for a while (gpio_to_desc(), I believe you
> meant this one, is part of the new API to keep this bridge for the cases like
> this).
>
> Arnd, are you going to send a v3? It would be really nice to have less
> collisions next cycle if your series is applied.
I was planning to, but I see you beat me to it already, sorry for
dropping the ball here and thanks for picking it up!
Arnd
On Fri, Jan 27, 2023 at 11:12 AM Arnd Bergmann <arnd@kernel.org> wrote: > From: Arnd Bergmann <arnd@arndb.de> > > gpio_set_debounce() only has a single user, which is trivially > converted to gpiod_set_debounce(). > > Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Yours, Linus Walleij
On Fri, Jan 27, 2023 at 11:11:46AM +0100, Arnd Bergmann wrote:
> From: Arnd Bergmann <arnd@arndb.de>
>
> gpio_set_debounce() only has a single user, which is trivially
> converted to gpiod_set_debounce().
LGTM, thanks!
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
> ---
> Documentation/driver-api/gpio/legacy.rst | 2 --
> .../zh_CN/driver-api/gpio/legacy.rst | 1 -
> Documentation/translations/zh_TW/gpio.txt | 1 -
> drivers/input/touchscreen/ads7846.c | 25 ++++++++++---------
> include/linux/gpio.h | 10 --------
> 5 files changed, 13 insertions(+), 26 deletions(-)
>
> diff --git a/Documentation/driver-api/gpio/legacy.rst b/Documentation/driver-api/gpio/legacy.rst
> index a0559d93efd1..e0306e78e34b 100644
> --- a/Documentation/driver-api/gpio/legacy.rst
> +++ b/Documentation/driver-api/gpio/legacy.rst
> @@ -238,8 +238,6 @@ setup or driver probe/teardown code, so this is an easy constraint.)::
> ## gpio_free_array()
>
> gpio_free()
> - gpio_set_debounce()
> -
>
>
> Claiming and Releasing GPIOs
> diff --git a/Documentation/translations/zh_CN/driver-api/gpio/legacy.rst b/Documentation/translations/zh_CN/driver-api/gpio/legacy.rst
> index 74fa473bb504..dee2a0517c1c 100644
> --- a/Documentation/translations/zh_CN/driver-api/gpio/legacy.rst
> +++ b/Documentation/translations/zh_CN/driver-api/gpio/legacy.rst
> @@ -219,7 +219,6 @@ GPIO 值的命令需要等待其信息排到队首才发送命令，再获得其
> ## gpio_free_array()
>
> gpio_free()
> - gpio_set_debounce()
>
>
>
> diff --git a/Documentation/translations/zh_TW/gpio.txt b/Documentation/translations/zh_TW/gpio.txt
> index 1b986bbb0909..dc608358d90a 100644
> --- a/Documentation/translations/zh_TW/gpio.txt
> +++ b/Documentation/translations/zh_TW/gpio.txt
> @@ -226,7 +226,6 @@ GPIO 值的命令需要等待其信息排到隊首才發送命令，再獲得其
> ## gpio_free_array()
>
> gpio_free()
> - gpio_set_debounce()
>
>
>
> diff --git a/drivers/input/touchscreen/ads7846.c b/drivers/input/touchscreen/ads7846.c
> index 4c3dd01902d0..da3c55d9cb98 100644
> --- a/drivers/input/touchscreen/ads7846.c
> +++ b/drivers/input/touchscreen/ads7846.c
> @@ -25,8 +25,8 @@
> #include <linux/slab.h>
> #include <linux/pm.h>
> #include <linux/of.h>
> -#include <linux/of_gpio.h>
> #include <linux/of_device.h>
> +#include <linux/gpio/consumer.h>
> #include <linux/gpio.h>
> #include <linux/spi/spi.h>
> #include <linux/spi/ads7846.h>
> @@ -139,7 +139,7 @@ struct ads7846 {
> int (*filter)(void *data, int data_idx, int *val);
> void *filter_data;
> int (*get_pendown_state)(void);
> - int gpio_pendown;
> + struct gpio_desc *gpio_pendown;
>
> void (*wait_for_sync)(void);
> };
> @@ -222,7 +222,7 @@ static int get_pendown_state(struct ads7846 *ts)
> if (ts->get_pendown_state)
> return ts->get_pendown_state();
>
> - return !gpio_get_value(ts->gpio_pendown);
> + return !gpiod_get_value(ts->gpio_pendown);
> }
>
> static void ads7846_report_pen_up(struct ads7846 *ts)
> @@ -1005,7 +1005,6 @@ static int ads7846_setup_pendown(struct spi_device *spi,
> if (pdata->get_pendown_state) {
> ts->get_pendown_state = pdata->get_pendown_state;
> } else if (gpio_is_valid(pdata->gpio_pendown)) {
> -
> err = devm_gpio_request_one(&spi->dev, pdata->gpio_pendown,
> GPIOF_IN, "ads7846_pendown");
> if (err) {
> @@ -1015,15 +1014,17 @@ static int ads7846_setup_pendown(struct spi_device *spi,
> return err;
> }
>
> - ts->gpio_pendown = pdata->gpio_pendown;
> -
> - if (pdata->gpio_pendown_debounce)
> - gpio_set_debounce(pdata->gpio_pendown,
> - pdata->gpio_pendown_debounce);
> + ts->gpio_pendown = gpio_to_desc(pdata->gpio_pendown);
> } else {
> - dev_err(&spi->dev, "no get_pendown_state nor gpio_pendown?\n");
> - return -EINVAL;
> + ts->gpio_pendown = gpiod_get(&spi->dev, "pendown-gpio", GPIOD_IN);
> + if (IS_ERR(ts->gpio_pendown)) {
> + dev_err(&spi->dev, "no get_pendown_state nor gpio_pendown?\n");
> + return PTR_ERR(ts->gpio_pendown);
> + }
> }
> + if (pdata->gpio_pendown_debounce)
> + gpiod_set_debounce(ts->gpio_pendown,
> + pdata->gpio_pendown_debounce);
>
> return 0;
> }
> @@ -1192,7 +1193,7 @@ static const struct ads7846_platform_data *ads7846_probe_dt(struct device *dev)
> pdata->wakeup = of_property_read_bool(node, "wakeup-source") ||
> of_property_read_bool(node, "linux,wakeup");
>
> - pdata->gpio_pendown = of_get_named_gpio(dev->of_node, "pendown-gpio", 0);
> + pdata->gpio_pendown = -1;
>
> return pdata;
> }
> diff --git a/include/linux/gpio.h b/include/linux/gpio.h
> index 6719a82eeec5..220e8656f2ab 100644
> --- a/include/linux/gpio.h
> +++ b/include/linux/gpio.h
> @@ -100,11 +100,6 @@ static inline int gpio_direction_output(unsigned gpio, int value)
> return gpiod_direction_output_raw(gpio_to_desc(gpio), value);
> }
>
> -static inline int gpio_set_debounce(unsigned gpio, unsigned debounce)
> -{
> - return gpiod_set_debounce(gpio_to_desc(gpio), debounce);
> -}
> -
> static inline int gpio_get_value_cansleep(unsigned gpio)
> {
> return gpiod_get_raw_value_cansleep(gpio_to_desc(gpio));
> @@ -215,11 +210,6 @@ static inline int gpio_direction_output(unsigned gpio, int value)
> return -ENOSYS;
> }
>
> -static inline int gpio_set_debounce(unsigned gpio, unsigned debounce)
> -{
> - return -ENOSYS;
> -}
> -
> static inline int gpio_get_value(unsigned gpio)
> {
> /* GPIO can never have been requested or set as {in,out}put */
> --
> 2.39.0
>
--
With Best Regards,
Andy Shevchenko
© 2016 - 2025 Red Hat, Inc.