[PATCH v8 0/9] Add minimal MT8365 and MT8365-EVK support

Bernhard Rosenkränzer posted 9 patches 1 year, 9 months ago
There is a newer version of this series
.../devicetree/bindings/arm/mediatek.yaml     |   4 +
.../interrupt-controller/mediatek,sysirq.txt  |   1 +
.../devicetree/bindings/mfd/syscon.yaml       |   1 +
.../pinctrl/mediatek,mt8365-pinctrl.yaml      | 197 +++++++++
.../bindings/serial/mediatek,uart.yaml        |   1 +
.../bindings/timer/mediatek,mtk-timer.txt     |   1 +
.../bindings/usb/mediatek,mtk-xhci.yaml       |   1 +
.../bindings/usb/mediatek,mtu3.yaml           |   1 +
arch/arm64/boot/dts/mediatek/Makefile         |   1 +
arch/arm64/boot/dts/mediatek/mt8365-evk.dts   | 169 ++++++++
arch/arm64/boot/dts/mediatek/mt8365.dtsi      | 378 ++++++++++++++++++
11 files changed, 755 insertions(+)
create mode 100644 Documentation/devicetree/bindings/pinctrl/mediatek,mt8365-pinctrl.yaml
create mode 100644 arch/arm64/boot/dts/mediatek/mt8365-evk.dts
create mode 100644 arch/arm64/boot/dts/mediatek/mt8365.dtsi
[PATCH v8 0/9] Add minimal MT8365 and MT8365-EVK support
Posted by Bernhard Rosenkränzer 1 year, 9 months ago
v8:
  - Add binding descriptions for mediatek,mt8365-systimer and
    mediatek,mt8365-uart
  - Specify ranges with parameters for u3phy

v7:
  - Update GIC information in mt8365.dtsi (thanks to Marc Zyngier for
    pointing out the problem)
  - Adjust the timer to match the updated GIC information

v6:
  - Add systimer in mt8365.dtsi
  - Add I/D caches and L2 cache details in mt8365.dtsi
  - Move bl31_secmon_reserved from mt8365.dtsi to mt8365-evk.dts
  - Fix inconsistent indentation in mt8365-pinctrl example
  - Further mt8365.dtsi cleanups
  - Submit to additional maintainers spotted by get_maintainer.pl

v5:
  - Reorder top-level entries in mediatek,mt8365-pinctrl.yaml to match
    example-schema
  - Use consistent quotes

v4:
  - Remove pins-are-numbered references that have been holding things up
    now that the patches removing it from dt-bindings have landed in linux-next

v3:
  - Remove a number of components that are not yet supported (they will
    come back alongside the corresponding drivers)
  - Address issues found by dt_binding_check (mostly fixing pinctrl
    bindings)
  - Address issues pointed out in comments
  - Reorder patches

v2:
  - Add missing dt-bindings documentation
  - Small cleanups addressing issues in v1 pointed out by Krzysztof Kozlowski


Bernhard Rosenkränzer (6):
  dt-bindings: arm64: dts: mediatek: Add mt8365-evk board
  dt-bindings: irq: mtk, sysirq: add support for mt8365
  dt-bindings: mfd: syscon: Add mt8365-syscfg
  dt-bindings: pinctrl: add bindings for Mediatek MT8365 SoC
  dt-bindings: timer: mediatek,mtk-timer: add MT8365 SoC bindings
  dt-bindings: serial: mediatek,uart: add MT8365 SoC bindings

Fabien Parent (3):
  dt-bindings: usb: mediatek,mtu3: add MT8365 SoC bindings
  dt-bindings: usb: mediatek,mtk-xhci: add MT8365 SoC bindings
  arm64: dts: mediatek: Initial mt8365-evk support

 .../devicetree/bindings/arm/mediatek.yaml     |   4 +
 .../interrupt-controller/mediatek,sysirq.txt  |   1 +
 .../devicetree/bindings/mfd/syscon.yaml       |   1 +
 .../pinctrl/mediatek,mt8365-pinctrl.yaml      | 197 +++++++++
 .../bindings/serial/mediatek,uart.yaml        |   1 +
 .../bindings/timer/mediatek,mtk-timer.txt     |   1 +
 .../bindings/usb/mediatek,mtk-xhci.yaml       |   1 +
 .../bindings/usb/mediatek,mtu3.yaml           |   1 +
 arch/arm64/boot/dts/mediatek/Makefile         |   1 +
 arch/arm64/boot/dts/mediatek/mt8365-evk.dts   | 169 ++++++++
 arch/arm64/boot/dts/mediatek/mt8365.dtsi      | 378 ++++++++++++++++++
 11 files changed, 755 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/pinctrl/mediatek,mt8365-pinctrl.yaml
 create mode 100644 arch/arm64/boot/dts/mediatek/mt8365-evk.dts
 create mode 100644 arch/arm64/boot/dts/mediatek/mt8365.dtsi

-- 
2.39.1

Re: [PATCH v8 0/9] Add minimal MT8365 and MT8365-EVK support
Posted by Kevin Hilman 1 year, 9 months ago
Bernhard Rosenkränzer <bero@baylibre.com> writes:

> v8:
>   - Add binding descriptions for mediatek,mt8365-systimer and
>     mediatek,mt8365-uart
>   - Specify ranges with parameters for u3phy

Built this series on top of v6.2-rc1 and boot tested on mt8365-evk board
locally.

Tested-by: Kevin Hilman <khilman@baylibre.com>

Kevin