[PATCH v4 07/14] soc: mediatek: mtk-svs: keep svs alive if CONFIG_DEBUG_FS not supported

Roger Lu posted 14 patches 1 year, 10 months ago
[PATCH v4 07/14] soc: mediatek: mtk-svs: keep svs alive if CONFIG_DEBUG_FS not supported
Posted by Roger Lu 1 year, 10 months ago
Some projects might not support CONFIG_DEBUG_FS but still needs svs to be
alive. Therefore, enclose debug cmd codes with CONFIG_DEBUG_FS to make sure
svs can be alive when CONFIG_DEBUG_FS not supported.

Signed-off-by: Roger Lu <roger.lu@mediatek.com>
---
 drivers/soc/mediatek/mtk-svs.c | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/drivers/soc/mediatek/mtk-svs.c b/drivers/soc/mediatek/mtk-svs.c
index a3c84e819bc5..70ca9c9acae0 100644
--- a/drivers/soc/mediatek/mtk-svs.c
+++ b/drivers/soc/mediatek/mtk-svs.c
@@ -138,6 +138,7 @@
 
 static DEFINE_SPINLOCK(svs_lock);
 
+#ifdef CONFIG_DEBUG_FS
 #define debug_fops_ro(name)						\
 	static int svs_##name##_debug_open(struct inode *inode,		\
 					   struct file *filp)		\
@@ -170,6 +171,7 @@ static DEFINE_SPINLOCK(svs_lock);
 	}
 
 #define svs_dentry_data(name)	{__stringify(name), &svs_##name##_debug_fops}
+#endif
 
 /**
  * enum svsb_phase - svs bank phase enumeration
@@ -652,6 +654,7 @@ static int svs_adjust_pm_opp_volts(struct svs_bank *svsb)
 	return ret;
 }
 
+#ifdef CONFIG_DEBUG_FS
 static int svs_dump_debug_show(struct seq_file *m, void *p)
 {
 	struct svs_platform *svsp = (struct svs_platform *)m->private;
@@ -867,6 +870,7 @@ static int svs_create_debug_cmds(struct svs_platform *svsp)
 
 	return 0;
 }
+#endif /* CONFIG_DEBUG_FS */
 
 static u32 interpolate(u32 f0, u32 f1, u32 v0, u32 v1, u32 fx)
 {
@@ -2476,11 +2480,13 @@ static int svs_probe(struct platform_device *pdev)
 		goto svs_probe_iounmap;
 	}
 
+#ifdef CONFIG_DEBUG_FS
 	ret = svs_create_debug_cmds(svsp);
 	if (ret) {
 		dev_err(svsp->dev, "svs create debug cmds fail: %d\n", ret);
 		goto svs_probe_iounmap;
 	}
+#endif
 
 	return 0;
 
-- 
2.18.0
Re: [PATCH v4 07/14] soc: mediatek: mtk-svs: keep svs alive if CONFIG_DEBUG_FS not supported
Posted by Matthias Brugger 1 year, 9 months ago

On 11/01/2023 08:45, Roger Lu wrote:
> Some projects might not support CONFIG_DEBUG_FS but still needs svs to be
> alive. Therefore, enclose debug cmd codes with CONFIG_DEBUG_FS to make sure
> svs can be alive when CONFIG_DEBUG_FS not supported.
> 
> Signed-off-by: Roger Lu <roger.lu@mediatek.com>

Applied, thanks!

> ---
>   drivers/soc/mediatek/mtk-svs.c | 6 ++++++
>   1 file changed, 6 insertions(+)
> 
> diff --git a/drivers/soc/mediatek/mtk-svs.c b/drivers/soc/mediatek/mtk-svs.c
> index a3c84e819bc5..70ca9c9acae0 100644
> --- a/drivers/soc/mediatek/mtk-svs.c
> +++ b/drivers/soc/mediatek/mtk-svs.c
> @@ -138,6 +138,7 @@
>   
>   static DEFINE_SPINLOCK(svs_lock);
>   
> +#ifdef CONFIG_DEBUG_FS
>   #define debug_fops_ro(name)						\
>   	static int svs_##name##_debug_open(struct inode *inode,		\
>   					   struct file *filp)		\
> @@ -170,6 +171,7 @@ static DEFINE_SPINLOCK(svs_lock);
>   	}
>   
>   #define svs_dentry_data(name)	{__stringify(name), &svs_##name##_debug_fops}
> +#endif
>   
>   /**
>    * enum svsb_phase - svs bank phase enumeration
> @@ -652,6 +654,7 @@ static int svs_adjust_pm_opp_volts(struct svs_bank *svsb)
>   	return ret;
>   }
>   
> +#ifdef CONFIG_DEBUG_FS
>   static int svs_dump_debug_show(struct seq_file *m, void *p)
>   {
>   	struct svs_platform *svsp = (struct svs_platform *)m->private;
> @@ -867,6 +870,7 @@ static int svs_create_debug_cmds(struct svs_platform *svsp)
>   
>   	return 0;
>   }
> +#endif /* CONFIG_DEBUG_FS */
>   
>   static u32 interpolate(u32 f0, u32 f1, u32 v0, u32 v1, u32 fx)
>   {
> @@ -2476,11 +2480,13 @@ static int svs_probe(struct platform_device *pdev)
>   		goto svs_probe_iounmap;
>   	}
>   
> +#ifdef CONFIG_DEBUG_FS
>   	ret = svs_create_debug_cmds(svsp);
>   	if (ret) {
>   		dev_err(svsp->dev, "svs create debug cmds fail: %d\n", ret);
>   		goto svs_probe_iounmap;
>   	}
> +#endif
>   
>   	return 0;
>