From: Hugo Villeneuve <hvilleneuve@dimonoff.com>
Add device tree bindings document for the Texas Instruments ADS7924
ADC.
Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com>
---
.../bindings/iio/adc/ti,ads7924.yaml | 104 ++++++++++++++++++
1 file changed, 104 insertions(+)
create mode 100644 Documentation/devicetree/bindings/iio/adc/ti,ads7924.yaml
diff --git a/Documentation/devicetree/bindings/iio/adc/ti,ads7924.yaml b/Documentation/devicetree/bindings/iio/adc/ti,ads7924.yaml
new file mode 100644
index 000000000000..a9d3e8778d11
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/ti,ads7924.yaml
@@ -0,0 +1,104 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/ti,ads7924.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TI ADS7924 4 channels 12 bits I2C analog to digital converter
+
+maintainers:
+ - Hugo Villeneuve <hvilleneuve@dimonoff.com>
+
+description: |
+ Texas Instruments ADS7924 4 channels 12 bits I2C analog to digital converter
+
+ Specifications:
+ https://www.ti.com/lit/gpn/ads7924
+
+properties:
+ compatible:
+ const: ti,ads7924
+
+ reg:
+ maxItems: 1
+
+ vref-supply:
+ description:
+ The regulator supply for the ADC reference voltage (AVDD)
+
+ reset-gpios:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ "#address-cells":
+ const: 1
+
+ "#size-cells":
+ const: 0
+
+ "#io-channel-cells":
+ const: 1
+
+required:
+ - compatible
+ - reg
+ - vref-supply
+ - "#address-cells"
+ - "#size-cells"
+
+patternProperties:
+ "^channel@[0-3]+$":
+ $ref: "adc.yaml"
+ type: object
+ description: |
+ Represents the external channels which are connected to the ADC.
+
+ properties:
+ reg:
+ description: |
+ The channel number. It can have up to 4 channels numbered from 0 to 3.
+ items:
+ - minimum: 0
+ maximum: 3
+
+ required:
+ - reg
+
+ additionalProperties: false
+
+examples:
+ - |
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ adc@48 {
+ compatible = "ti,ads7924";
+ reg = <0x48>;
+ vref-supply = <&ads7924_reg>;
+ reset-gpios = <&gpio 5 GPIO_ACTIVE_LOW>;
+ interrupts = <25 IRQ_TYPE_EDGE_FALLING>;
+ interrupt-parent = <&gpio>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ channel@0 {
+ reg = <0>;
+ label = "CH0";
+ };
+ channel@1 {
+ reg = <1>;
+ label = "CH1";
+ };
+ channel@2 {
+ reg = <2>;
+ label = "CH2";
+ };
+ channel@3 {
+ reg = <3>;
+ label = "CH3";
+ };
+ };
+ };
+...
--
2.30.2On 10/01/2023 17:01, Hugo Villeneuve wrote:
> From: Hugo Villeneuve <hvilleneuve@dimonoff.com>
>
> Add device tree bindings document for the Texas Instruments ADS7924
> ADC.
>
> Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com>
Please test the bindings before sending. It's better to use tools for
review than humans... we are all quite busy.
> ---
> .../bindings/iio/adc/ti,ads7924.yaml | 104 ++++++++++++++++++
> 1 file changed, 104 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/iio/adc/ti,ads7924.yaml
>
> diff --git a/Documentation/devicetree/bindings/iio/adc/ti,ads7924.yaml b/Documentation/devicetree/bindings/iio/adc/ti,ads7924.yaml
> new file mode 100644
> index 000000000000..a9d3e8778d11
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/iio/adc/ti,ads7924.yaml
> @@ -0,0 +1,104 @@
> +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/iio/adc/ti,ads7924.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: TI ADS7924 4 channels 12 bits I2C analog to digital converter
> +
> +maintainers:
> + - Hugo Villeneuve <hvilleneuve@dimonoff.com>
> +
> +description: |
> + Texas Instruments ADS7924 4 channels 12 bits I2C analog to digital converter
> +
> + Specifications:
> + https://www.ti.com/lit/gpn/ads7924
> +
> +properties:
> + compatible:
> + const: ti,ads7924
> +
> + reg:
> + maxItems: 1
> +
> + vref-supply:
> + description:
> + The regulator supply for the ADC reference voltage (AVDD)
> +
> + reset-gpios:
> + maxItems: 1
> +
> + interrupts:
> + maxItems: 1
> +
> + "#address-cells":
> + const: 1
> +
> + "#size-cells":
> + const: 0
> +
> + "#io-channel-cells":
> + const: 1
> +
> +required:
> + - compatible
> + - reg
> + - vref-supply
> + - "#address-cells"
> + - "#size-cells"
> +
> +patternProperties:
Put it before "required:" block.
> + "^channel@[0-3]+$":
> + $ref: "adc.yaml"
Drop quotes.
> + type: object
> + description: |
> + Represents the external channels which are connected to the ADC.
> +
> + properties:
> + reg:
> + description: |
> + The channel number. It can have up to 4 channels numbered from 0 to 3.
> + items:
> + - minimum: 0
> + maximum: 3
Test your bindings, so you will see error here of missing label: true.
> +
> + required:
> + - reg
> +
> + additionalProperties: false
> +
Missing additionalProperties: false.
> +examples:
> + - |
> + i2c {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + adc@48 {
> + compatible = "ti,ads7924";
> + reg = <0x48>;
> + vref-supply = <&ads7924_reg>;
> + reset-gpios = <&gpio 5 GPIO_ACTIVE_LOW>;
> + interrupts = <25 IRQ_TYPE_EDGE_FALLING>;
> + interrupt-parent = <&gpio>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + channel@0 {
> + reg = <0>;
> + label = "CH0";
> + };
> + channel@1 {
> + reg = <1>;
> + label = "CH1";
> + };
> + channel@2 {
> + reg = <2>;
> + label = "CH2";
> + };
> + channel@3 {
> + reg = <3>;
> + label = "CH3";
> + };
> + };
> + };
> +...
Best regards,
Krzysztof
On Wed, 11 Jan 2023 10:23:20 +0100
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> wrote:
> On 10/01/2023 17:01, Hugo Villeneuve wrote:
> > From: Hugo Villeneuve <hvilleneuve@dimonoff.com>
> >
> > Add device tree bindings document for the Texas Instruments ADS7924
> > ADC.
> >
> > Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com>
>
> Please test the bindings before sending. It's better to use tools for
> review than humans... we are all quite busy.
Hi,
will do from now on.
> > ---
> > .../bindings/iio/adc/ti,ads7924.yaml | 104 ++++++++++++++++++
> > 1 file changed, 104 insertions(+)
> > create mode 100644 Documentation/devicetree/bindings/iio/adc/ti,ads7924.yaml
> >
> > diff --git a/Documentation/devicetree/bindings/iio/adc/ti,ads7924.yaml b/Documentation/devicetree/bindings/iio/adc/ti,ads7924.yaml
> > new file mode 100644
> > index 000000000000..a9d3e8778d11
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/iio/adc/ti,ads7924.yaml
> > @@ -0,0 +1,104 @@
> > +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> > +%YAML 1.2
> > +---
> > +$id: http://devicetree.org/schemas/iio/adc/ti,ads7924.yaml#
> > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > +
> > +title: TI ADS7924 4 channels 12 bits I2C analog to digital converter
> > +
> > +maintainers:
> > + - Hugo Villeneuve <hvilleneuve@dimonoff.com>
> > +
> > +description: |
> > + Texas Instruments ADS7924 4 channels 12 bits I2C analog to digital converter
> > +
> > + Specifications:
> > + https://www.ti.com/lit/gpn/ads7924
> > +
> > +properties:
> > + compatible:
> > + const: ti,ads7924
> > +
> > + reg:
> > + maxItems: 1
> > +
> > + vref-supply:
> > + description:
> > + The regulator supply for the ADC reference voltage (AVDD)
> > +
> > + reset-gpios:
> > + maxItems: 1
> > +
> > + interrupts:
> > + maxItems: 1
> > +
> > + "#address-cells":
> > + const: 1
> > +
> > + "#size-cells":
> > + const: 0
> > +
> > + "#io-channel-cells":
> > + const: 1
> > +
> > +required:
> > + - compatible
> > + - reg
> > + - vref-supply
> > + - "#address-cells"
> > + - "#size-cells"
> > +
> > +patternProperties:
>
> Put it before "required:" block.
Done.
>
> > + "^channel@[0-3]+$":
> > + $ref: "adc.yaml"
>
> Drop quotes.
Done.
>
> > + type: object
> > + description: |
> > + Represents the external channels which are connected to the ADC.
> > +
> > + properties:
> > + reg:
> > + description: |
> > + The channel number. It can have up to 4 channels numbered from 0 to 3.
> > + items:
> > + - minimum: 0
> > + maximum: 3
>
> Test your bindings, so you will see error here of missing label: true.
Added label.
>
> > +
> > + required:
> > + - reg
> > +
> > + additionalProperties: false
> > +
>
> Missing additionalProperties: false.
Added.
>
> > +examples:
> > + - |
> > + i2c {
> > + #address-cells = <1>;
> > + #size-cells = <0>;
> > +
> > + adc@48 {
> > + compatible = "ti,ads7924";
> > + reg = <0x48>;
> > + vref-supply = <&ads7924_reg>;
> > + reset-gpios = <&gpio 5 GPIO_ACTIVE_LOW>;
> > + interrupts = <25 IRQ_TYPE_EDGE_FALLING>;
> > + interrupt-parent = <&gpio>;
> > + #address-cells = <1>;
> > + #size-cells = <0>;
> > + channel@0 {
> > + reg = <0>;
> > + label = "CH0";
> > + };
> > + channel@1 {
> > + reg = <1>;
> > + label = "CH1";
> > + };
> > + channel@2 {
> > + reg = <2>;
> > + label = "CH2";
> > + };
> > + channel@3 {
> > + reg = <3>;
> > + label = "CH3";
> > + };
> > + };
> > + };
> > +...
>
> Best regards,
> Krzysztof
--
Hugo Villeneuve <hugo@hugovil.com>
On Tue, 10 Jan 2023 11:01:24 -0500, Hugo Villeneuve wrote: > From: Hugo Villeneuve <hvilleneuve@dimonoff.com> > > Add device tree bindings document for the Texas Instruments ADS7924 > ADC. > > Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com> > --- > .../bindings/iio/adc/ti,ads7924.yaml | 104 ++++++++++++++++++ > 1 file changed, 104 insertions(+) > create mode 100644 Documentation/devicetree/bindings/iio/adc/ti,ads7924.yaml > My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check' on your patch (DT_CHECKER_FLAGS is new in v5.13): yamllint warnings/errors: dtschema/dtc warnings/errors: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/iio/adc/ti,ads7924.yaml: 'oneOf' conditional failed, one must be fixed: 'unevaluatedProperties' is a required property 'additionalProperties' is a required property hint: Either unevaluatedProperties or additionalProperties must be present from schema $id: http://devicetree.org/meta-schemas/core.yaml# Error: Documentation/devicetree/bindings/iio/adc/ti,ads7924.example.dts:29.40-41 syntax error FATAL ERROR: Unable to parse input tree make[1]: *** [scripts/Makefile.lib:434: Documentation/devicetree/bindings/iio/adc/ti,ads7924.example.dtb] Error 1 make[1]: *** Waiting for unfinished jobs.... make: *** [Makefile:1508: dt_binding_check] Error 2 doc reference errors (make refcheckdocs): See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20230110160124.3853593-3-hugo@hugovil.com The base for the series is generally the latest rc1. A different dependency should be noted in *this* patch. If you already ran 'make dt_binding_check' and didn't see the above error(s), then make sure 'yamllint' is installed and dt-schema is up to date: pip3 install dtschema --upgrade Please check and re-submit after running the above command yourself. Note that DT_SCHEMA_FILES can be set to your schema file to speed up checking your schema. However, it must be unset to test all examples with your schema.
On Tue, 10 Jan 2023 19:34:56 -0600
Rob Herring <robh@kernel.org> wrote:
>
> On Tue, 10 Jan 2023 11:01:24 -0500, Hugo Villeneuve wrote:
> > From: Hugo Villeneuve <hvilleneuve@dimonoff.com>
> >
> > Add device tree bindings document for the Texas Instruments ADS7924
> > ADC.
> >
> > Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com>
> > ---
> > .../bindings/iio/adc/ti,ads7924.yaml | 104 ++++++++++++++++++
> > 1 file changed, 104 insertions(+)
> > create mode 100644 Documentation/devicetree/bindings/iio/adc/ti,ads7924.yaml
> >
>
> My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
> on your patch (DT_CHECKER_FLAGS is new in v5.13):
>
> yamllint warnings/errors:
>
> dtschema/dtc warnings/errors:
> /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/iio/adc/ti,ads7924.yaml: 'oneOf' conditional failed, one must be fixed:
> 'unevaluatedProperties' is a required property
> 'additionalProperties' is a required property
> hint: Either unevaluatedProperties or additionalProperties must be present
> from schema $id: http://devicetree.org/meta-schemas/core.yaml#
> Error: Documentation/devicetree/bindings/iio/adc/ti,ads7924.example.dts:29.40-41 syntax error
> FATAL ERROR: Unable to parse input tree
> make[1]: *** [scripts/Makefile.lib:434: Documentation/devicetree/bindings/iio/adc/ti,ads7924.example.dtb] Error 1
> make[1]: *** Waiting for unfinished jobs....
> make: *** [Makefile:1508: dt_binding_check] Error 2
>
> doc reference errors (make refcheckdocs):
>
> See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20230110160124.3853593-3-hugo@hugovil.com
>
> The base for the series is generally the latest rc1. A different dependency
> should be noted in *this* patch.
Hi Rob,
I already did specify the base-commit in the first patch of the series (cover letter). Do you also want me to add an additional message in *this* commit to specify the git repos and branch that were used? Or put this comment in the cover letter?
I tried to follow the documentation here:
https://www.kernel.org/doc/html/v6.2-rc3/process/submitting-patches.html
but it was not clear as to what base branch to use when no "T:" field is found in the MAINTAINERS file.
>
> If you already ran 'make dt_binding_check' and didn't see the above
> error(s), then make sure 'yamllint' is installed and dt-schema is up to
> date:
>
> pip3 install dtschema --upgrade
I didn't run it for this series, my bad, I now have added it to my automated scripts to not forget it next time.
>
> Please check and re-submit after running the above command yourself. Note
> that DT_SCHEMA_FILES can be set to your schema file to speed up checking
> your schema. However, it must be unset to test all examples with your schema.
Done, thank you for your suggestions.
Hugo Villeneuve <hugo@hugovil.com>
© 2016 - 2025 Red Hat, Inc.