This series introduces basic support for two Galaxy Tab A
tablets: 8 and 10 inch variants. They share most of the
hardware and are mainly dffernet by the display.
With this series both tablets gain support for things like
- SDHCI (internal and external storage)
- USB Device Mode
- UART
- Regulators
- WCNSS (WiFi/BT)
- GPIO keys
- Fuel gauge
- Touchscreen
- Accelerometer
In fact, with some additional patches like display and
modem support, that are not included as part of this
series, these tablets can actually reach one's expectations
of what a "normal" tablet should be able to do.
Changes in v2:
- Squashed the commits.
Changes in v3:
- Address Konrad's review comments.
Jasper Korten (1):
arm64: dts: qcom: Add device tree for Samsung Galaxy Tab A 9.7 (2015)
Nikita Travkin (1):
dt-bindings: qcom: Document samsung,gt58 and gt510
Siddharth Manthan (1):
arm64: dts: qcom: Add device tree for Samsung Galaxy Tab A 8.0 (2015)
.../devicetree/bindings/arm/qcom.yaml | 2 +
arch/arm64/boot/dts/qcom/Makefile | 2 +
.../dts/qcom/msm8916-samsung-gt5-common.dtsi | 296 ++++++++++++++++++
.../boot/dts/qcom/msm8916-samsung-gt510.dts | 113 +++++++
.../boot/dts/qcom/msm8916-samsung-gt58.dts | 75 +++++
5 files changed, 488 insertions(+)
create mode 100644 arch/arm64/boot/dts/qcom/msm8916-samsung-gt5-common.dtsi
create mode 100644 arch/arm64/boot/dts/qcom/msm8916-samsung-gt510.dts
create mode 100644 arch/arm64/boot/dts/qcom/msm8916-samsung-gt58.dts
--
2.38.1