1. Patchew
  2. linux
  3. [PATCH v1 0/4] add i.MX93 TMU support
  4. View patch

[PATCH v1 4/4] arm64: dts: imx93: Add CPU thermal zone

Alice Guo (OSS) posted 4 patches 2 years, 8 months ago
[PATCH v1 4/4] arm64: dts: imx93: Add CPU thermal zone
Posted by Alice Guo (OSS) 2 years, 8 months ago 
From: Alice Guo <alice.guo@nxp.com>

Add CPU thermal zone and attach it to the TMU which monitors the CPU
temperature.

Signed-off-by: Alice Guo <alice.guo@nxp.com>
Reviewed-by: Jacky Bai <ping.bai@nxp.com>
Reviewed-by: Ye Li <ye.li@nxp.com>
Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com>
---
 arch/arm64/boot/dts/freescale/imx93.dtsi | 48 ++++++++++++++++++++++++
 1 file changed, 48 insertions(+)

diff --git a/arch/arm64/boot/dts/freescale/imx93.dtsi b/arch/arm64/boot/dts/freescale/imx93.dtsi
index 6808321ed809..60306f3c5e7f 100644
--- a/arch/arm64/boot/dts/freescale/imx93.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx93.dtsi
@@ -8,6 +8,7 @@
 #include <dt-bindings/input/input.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/power/fsl,imx93-power.h>
+#include <dt-bindings/thermal/thermal.h>
 
 #include "imx93-pinfunc.h"
 
@@ -116,6 +117,38 @@
 		interrupt-parent = <&gic>;
 	};
 
+	thermal-zones {
+		cpu-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <2000>;
+
+			thermal-sensors = <&tmu 0>;
+
+			trips {
+				cpu_alert: cpu-alert {
+					temperature = <80000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu_crit: cpu-crit {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+		};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu_alert>;
+					cooling-device =
+						<&A55_0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+						<&A55_1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+	};
+
 	soc@0 {
 		compatible = "simple-bus";
 		#address-cells = <1>;
@@ -280,6 +313,21 @@
 				compatible = "fsl,imx93-anatop", "syscon";
 				reg = <0x44480000 0x10000>;
 			};
+
+			tmu: tmu@44482000 {
+				compatible = "fsl,imx93-tmu";
+				reg = <0x44482000 0x1000>;
+				clocks = <&clk IMX93_CLK_TMC_GATE>;
+				little-endian;
+				fsl,tmu-calibration = <0x0000000e 0x800000da
+						       0x00000029 0x800000e9
+						       0x00000056 0x80000102
+						       0x000000a2 0x8000012a
+						       0x00000116 0x80000166
+						       0x00000195 0x800001a7
+						       0x000001b2 0x800001b6>;
+				#thermal-sensor-cells = <1>;
+			};
 		};
 
 		aips2: bus@42000000 {
-- 
2.17.1
Re: [PATCH v1 4/4] arm64: dts: imx93: Add CPU thermal zone
Posted by Alexander Stein 2 years, 6 months ago 
Hi,

Am Donnerstag, 5. Januar 2023, 11:17:48 CET schrieb Alice Guo (OSS):
> From: Alice Guo <alice.guo@nxp.com>
> 
> Add CPU thermal zone and attach it to the TMU which monitors the CPU
> temperature.
> 
> Signed-off-by: Alice Guo <alice.guo@nxp.com>
> Reviewed-by: Jacky Bai <ping.bai@nxp.com>
> Reviewed-by: Ye Li <ye.li@nxp.com>
> Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com>
> ---
>  arch/arm64/boot/dts/freescale/imx93.dtsi | 48 ++++++++++++++++++++++++
>  1 file changed, 48 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/freescale/imx93.dtsi
> b/arch/arm64/boot/dts/freescale/imx93.dtsi index 6808321ed809..60306f3c5e7f
> 100644
> --- a/arch/arm64/boot/dts/freescale/imx93.dtsi
> +++ b/arch/arm64/boot/dts/freescale/imx93.dtsi
> @@ -8,6 +8,7 @@
>  #include <dt-bindings/input/input.h>
>  #include <dt-bindings/interrupt-controller/arm-gic.h>
>  #include <dt-bindings/power/fsl,imx93-power.h>
> +#include <dt-bindings/thermal/thermal.h>
> 
>  #include "imx93-pinfunc.h"
> 
> @@ -116,6 +117,38 @@
>  		interrupt-parent = <&gic>;
>  	};
> 
> +	thermal-zones {
> +		cpu-thermal {
> +			polling-delay-passive = <250>;
> +			polling-delay = <2000>;
> +
> +			thermal-sensors = <&tmu 0>;
> +
> +			trips {
> +				cpu_alert: cpu-alert {
> +					temperature = <80000>;
> +					hysteresis = <2000>;
> +					type = "passive";
> +				};
> +
> +				cpu_crit: cpu-crit {
> +					temperature = <90000>;
> +					hysteresis = <2000>;
> +					type = "critical";
> +				};
> +		};

This brace needs an additional indent.

Best regards,
Alexander

> +
> +			cooling-maps {
> +				map0 {
> +					trip = <&cpu_alert>;
> +					cooling-device =
> +						<&A55_0 
THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> +						<&A55_1 
THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
> +				};
> +			};
> +		};
> +	};
> +
>  	soc@0 {
>  		compatible = "simple-bus";
>  		#address-cells = <1>;
> @@ -280,6 +313,21 @@
>  				compatible = "fsl,imx93-anatop", 
"syscon";
>  				reg = <0x44480000 0x10000>;
>  			};
> +
> +			tmu: tmu@44482000 {
> +				compatible = "fsl,imx93-tmu";
> +				reg = <0x44482000 0x1000>;
> +				clocks = <&clk IMX93_CLK_TMC_GATE>;
> +				little-endian;
> +				fsl,tmu-calibration = <0x0000000e 
0x800000da
> +						       0x00000029 
0x800000e9
> +						       0x00000056 
0x80000102
> +						       0x000000a2 
0x8000012a
> +						       0x00000116 
0x80000166
> +						       0x00000195 
0x800001a7
> +						       0x000001b2 
0x800001b6>;
> +				#thermal-sensor-cells = <1>;
> +			};
>  		};
> 
>  		aips2: bus@42000000 {


-- 
TQ-Systems GmbH | Mühlstraße 2, Gut Delling | 82229 Seefeld, Germany
Amtsgericht München, HRB 105018
Geschäftsführer: Detlef Schneider, Rüdiger Stahl, Stefan Schneider
http://www.tq-group.com/
Re: [PATCH v1 4/4] arm64: dts: imx93: Add CPU thermal zone
Posted by Krzysztof Kozlowski 2 years, 8 months ago 
On 05/01/2023 11:17, Alice Guo (OSS) wrote:
> From: Alice Guo <alice.guo@nxp.com>
> 
> Add CPU thermal zone and attach it to the TMU which monitors the CPU
> temperature.
> 
> Signed-off-by: Alice Guo <alice.guo@nxp.com>
> Reviewed-by: Jacky Bai <ping.bai@nxp.com>
> Reviewed-by: Ye Li <ye.li@nxp.com>
> Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com>
> ---
>  arch/arm64/boot/dts/freescale/imx93.dtsi | 48 ++++++++++++++++++++++++
>  1 file changed, 48 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/freescale/imx93.dtsi b/arch/arm64/boot/dts/freescale/imx93.dtsi
> index 6808321ed809..60306f3c5e7f 100644
> --- a/arch/arm64/boot/dts/freescale/imx93.dtsi
> +++ b/arch/arm64/boot/dts/freescale/imx93.dtsi
> @@ -8,6 +8,7 @@
>  #include <dt-bindings/input/input.h>
>  #include <dt-bindings/interrupt-controller/arm-gic.h>
>  #include <dt-bindings/power/fsl,imx93-power.h>
> +#include <dt-bindings/thermal/thermal.h>
>  
>  #include "imx93-pinfunc.h"
>  
> @@ -116,6 +117,38 @@
>  		interrupt-parent = <&gic>;
>  	};
>  
> +	thermal-zones {
> +		cpu-thermal {
> +			polling-delay-passive = <250>;
> +			polling-delay = <2000>;
> +
> +			thermal-sensors = <&tmu 0>;
> +
> +			trips {
> +				cpu_alert: cpu-alert {
> +					temperature = <80000>;
> +					hysteresis = <2000>;
> +					type = "passive";
> +				};
> +
> +				cpu_crit: cpu-crit {
> +					temperature = <90000>;
> +					hysteresis = <2000>;
> +					type = "critical";
> +				};
> +		};

Wrong indentation.

Best regards,
Krzysztof

Patchew 2.1-devel-b67e4c2

© 2016 - 2025 Red Hat, Inc.