[v2] clocksource/drivers/riscv: Get rid of clocksource_arch_init() callback

[PATCH v2] clocksource/drivers/riscv: Get rid of clocksource_arch_init() callback

Posted by Prabhakar 2 years, 8 months ago

From: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>

Having a clocksource_arch_init() callback always sets vdso_clock_mode to
VDSO_CLOCKMODE_ARCHTIMER if GENERIC_GETTIMEOFDAY is enabled, this is
required for the riscv-timer.

This works for platforms where just riscv-timer clocksource is present.
On platforms where other clock sources are available we want them to
register with vdso_clock_mode set to VDSO_CLOCKMODE_NONE.

On the Renesas RZ/Five SoC OSTM block can be used as clocksource [0], to
avoid multiple clock sources being registered as VDSO_CLOCKMODE_ARCHTIMER
move setting of vdso_clock_mode in the riscv-timer driver instead of doing
this in clocksource_arch_init() callback as done similarly for ARM/64
architecture.

[0] drivers/clocksource/renesas-ostm.c

Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Tested-by: Samuel Holland <samuel@sholland.org>
---
RFC -> v2
* Dropped vdso_default static global variable
* Used IS_ENABLED() macro
* Included Tested-by from Samuel

RFC:
https://patchwork.kernel.org/project/linux-renesas-soc/patch/20221211215843.24024-1-prabhakar.mahadev-lad.rj@bp.renesas.com/
---
 arch/riscv/Kconfig                | 1 -
 arch/riscv/kernel/time.c          | 9 ---------
 drivers/clocksource/timer-riscv.c | 5 +++++
 3 files changed, 5 insertions(+), 10 deletions(-)

diff --git a/arch/riscv/Kconfig b/arch/riscv/Kconfig
index e2b656043abf..9c687da7756d 100644
--- a/arch/riscv/Kconfig
+++ b/arch/riscv/Kconfig
@@ -12,7 +12,6 @@ config 32BIT
 
 config RISCV
 	def_bool y
-	select ARCH_CLOCKSOURCE_INIT
 	select ARCH_ENABLE_HUGEPAGE_MIGRATION if HUGETLB_PAGE && MIGRATION
 	select ARCH_ENABLE_SPLIT_PMD_PTLOCK if PGTABLE_LEVELS > 2
 	select ARCH_HAS_BINFMT_FLAT
diff --git a/arch/riscv/kernel/time.c b/arch/riscv/kernel/time.c
index 8217b0f67c6c..42bee305e997 100644
--- a/arch/riscv/kernel/time.c
+++ b/arch/riscv/kernel/time.c
@@ -30,12 +30,3 @@ void __init time_init(void)
 	of_clk_init(NULL);
 	timer_probe();
 }
-
-void clocksource_arch_init(struct clocksource *cs)
-{
-#ifdef CONFIG_GENERIC_GETTIMEOFDAY
-	cs->vdso_clock_mode = VDSO_CLOCKMODE_ARCHTIMER;
-#else
-	cs->vdso_clock_mode = VDSO_CLOCKMODE_NONE;
-#endif
-}
diff --git a/drivers/clocksource/timer-riscv.c b/drivers/clocksource/timer-riscv.c
index 55dad7965f43..c416e5e934bf 100644
--- a/drivers/clocksource/timer-riscv.c
+++ b/drivers/clocksource/timer-riscv.c
@@ -77,6 +77,11 @@ static struct clocksource riscv_clocksource = {
 	.mask		= CLOCKSOURCE_MASK(64),
 	.flags		= CLOCK_SOURCE_IS_CONTINUOUS,
 	.read		= riscv_clocksource_rdtime,
+#if IS_ENABLED(CONFIG_GENERIC_GETTIMEOFDAY)
+	.vdso_clock_mode = VDSO_CLOCKMODE_ARCHTIMER,
+#else
+	.vdso_clock_mode = VDSO_CLOCKMODE_NONE,
+#endif
 };
 
 static int riscv_timer_starting_cpu(unsigned int cpu)
-- 
2.25.1

Re: [PATCH v2] clocksource/drivers/riscv: Get rid of clocksource_arch_init() callback

Posted by Daniel Lezcano 2 years, 7 months ago

On 29/12/2022 23:46, Prabhakar wrote:
> From: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
> 
> Having a clocksource_arch_init() callback always sets vdso_clock_mode to
> VDSO_CLOCKMODE_ARCHTIMER if GENERIC_GETTIMEOFDAY is enabled, this is
> required for the riscv-timer.
> 
> This works for platforms where just riscv-timer clocksource is present.
> On platforms where other clock sources are available we want them to
> register with vdso_clock_mode set to VDSO_CLOCKMODE_NONE.
> 
> On the Renesas RZ/Five SoC OSTM block can be used as clocksource [0], to
> avoid multiple clock sources being registered as VDSO_CLOCKMODE_ARCHTIMER
> move setting of vdso_clock_mode in the riscv-timer driver instead of doing
> this in clocksource_arch_init() callback as done similarly for ARM/64
> architecture.
> 
> [0] drivers/clocksource/renesas-ostm.c
> 
> Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
> Tested-by: Samuel Holland <samuel@sholland.org>
> ---

Applied, I had a trivial conflict which was fixed. Please have a look on 
the patch once it is push in the timers/next branch

Thanks

-- 
<http://www.linaro.org/> Linaro.org │ Open source software for ARM SoCs

Follow Linaro:  <http://www.facebook.com/pages/Linaro> Facebook |
<http://twitter.com/#!/linaroorg> Twitter |
<http://www.linaro.org/linaro-blog/> Blog

Re: [PATCH v2] clocksource/drivers/riscv: Get rid of clocksource_arch_init() callback

Posted by Conor Dooley 2 years, 7 months ago

On Thu, Dec 29, 2022 at 10:46:01PM +0000, Prabhakar wrote:
> From: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
> 
> Having a clocksource_arch_init() callback always sets vdso_clock_mode to
> VDSO_CLOCKMODE_ARCHTIMER if GENERIC_GETTIMEOFDAY is enabled, this is
> required for the riscv-timer.
> 
> This works for platforms where just riscv-timer clocksource is present.
> On platforms where other clock sources are available we want them to
> register with vdso_clock_mode set to VDSO_CLOCKMODE_NONE.
> 
> On the Renesas RZ/Five SoC OSTM block can be used as clocksource [0], to
> avoid multiple clock sources being registered as VDSO_CLOCKMODE_ARCHTIMER
> move setting of vdso_clock_mode in the riscv-timer driver instead of doing
> this in clocksource_arch_init() callback as done similarly for ARM/64
> architecture.
> 
> [0] drivers/clocksource/renesas-ostm.c
> 
> Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
> Tested-by: Samuel Holland <samuel@sholland.org>
> ---
> RFC -> v2
> * Dropped vdso_default static global variable

> * Used IS_ENABLED() macro

Not sure it really makes much difference here either way, but increased
coverage is always good I suppose.

rv32 is the user for the !GENERIC_GETTIMEOFDAY patch IIRC and nothing
seemed obviously amiss there to me either.

Reviewed-by: Conor Dooley <conor.dooley@microchip.com>

Re: [PATCH v2] clocksource/drivers/riscv: Get rid of clocksource_arch_init() callback

Posted by Lad, Prabhakar 2 years, 8 months ago

On Thu, Dec 29, 2022 at 10:50 PM Prabhakar <prabhakar.csengg@gmail.com> wrote:
>
> From: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
>
> Having a clocksource_arch_init() callback always sets vdso_clock_mode to
> VDSO_CLOCKMODE_ARCHTIMER if GENERIC_GETTIMEOFDAY is enabled, this is
> required for the riscv-timer.
>
> This works for platforms where just riscv-timer clocksource is present.
> On platforms where other clock sources are available we want them to
> register with vdso_clock_mode set to VDSO_CLOCKMODE_NONE.
>
> On the Renesas RZ/Five SoC OSTM block can be used as clocksource [0], to
> avoid multiple clock sources being registered as VDSO_CLOCKMODE_ARCHTIMER
> move setting of vdso_clock_mode in the riscv-timer driver instead of doing
> this in clocksource_arch_init() callback as done similarly for ARM/64
> architecture.
>
> [0] drivers/clocksource/renesas-ostm.c
>
> Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
> Tested-by: Samuel Holland <samuel@sholland.org>
> ---
> RFC -> v2
> * Dropped vdso_default static global variable
> * Used IS_ENABLED() macro
> * Included Tested-by from Samuel
>
> RFC:
> https://patchwork.kernel.org/project/linux-renesas-soc/patch/20221211215843.24024-1-prabhakar.mahadev-lad.rj@bp.renesas.com/
> ---
>  arch/riscv/Kconfig                | 1 -
>  arch/riscv/kernel/time.c          | 9 ---------
>  drivers/clocksource/timer-riscv.c | 5 +++++
>  3 files changed, 5 insertions(+), 10 deletions(-)
>
Gentle ping.

Cheers,
Prabhakar

> diff --git a/arch/riscv/Kconfig b/arch/riscv/Kconfig
> index e2b656043abf..9c687da7756d 100644
> --- a/arch/riscv/Kconfig
> +++ b/arch/riscv/Kconfig
> @@ -12,7 +12,6 @@ config 32BIT
>
>  config RISCV
>         def_bool y
> -       select ARCH_CLOCKSOURCE_INIT
>         select ARCH_ENABLE_HUGEPAGE_MIGRATION if HUGETLB_PAGE && MIGRATION
>         select ARCH_ENABLE_SPLIT_PMD_PTLOCK if PGTABLE_LEVELS > 2
>         select ARCH_HAS_BINFMT_FLAT
> diff --git a/arch/riscv/kernel/time.c b/arch/riscv/kernel/time.c
> index 8217b0f67c6c..42bee305e997 100644
> --- a/arch/riscv/kernel/time.c
> +++ b/arch/riscv/kernel/time.c
> @@ -30,12 +30,3 @@ void __init time_init(void)
>         of_clk_init(NULL);
>         timer_probe();
>  }
> -
> -void clocksource_arch_init(struct clocksource *cs)
> -{
> -#ifdef CONFIG_GENERIC_GETTIMEOFDAY
> -       cs->vdso_clock_mode = VDSO_CLOCKMODE_ARCHTIMER;
> -#else
> -       cs->vdso_clock_mode = VDSO_CLOCKMODE_NONE;
> -#endif
> -}
> diff --git a/drivers/clocksource/timer-riscv.c b/drivers/clocksource/timer-riscv.c
> index 55dad7965f43..c416e5e934bf 100644
> --- a/drivers/clocksource/timer-riscv.c
> +++ b/drivers/clocksource/timer-riscv.c
> @@ -77,6 +77,11 @@ static struct clocksource riscv_clocksource = {
>         .mask           = CLOCKSOURCE_MASK(64),
>         .flags          = CLOCK_SOURCE_IS_CONTINUOUS,
>         .read           = riscv_clocksource_rdtime,
> +#if IS_ENABLED(CONFIG_GENERIC_GETTIMEOFDAY)
> +       .vdso_clock_mode = VDSO_CLOCKMODE_ARCHTIMER,
> +#else
> +       .vdso_clock_mode = VDSO_CLOCKMODE_NONE,
> +#endif
>  };
>
>  static int riscv_timer_starting_cpu(unsigned int cpu)
> --
> 2.25.1
>

Re: [PATCH v2] clocksource/drivers/riscv: Get rid of clocksource_arch_init() callback

Posted by Samuel Holland 2 years, 8 months ago

On 12/29/22 16:46, Prabhakar wrote:
> From: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
> 
> Having a clocksource_arch_init() callback always sets vdso_clock_mode to
> VDSO_CLOCKMODE_ARCHTIMER if GENERIC_GETTIMEOFDAY is enabled, this is
> required for the riscv-timer.
> 
> This works for platforms where just riscv-timer clocksource is present.
> On platforms where other clock sources are available we want them to
> register with vdso_clock_mode set to VDSO_CLOCKMODE_NONE.
> 
> On the Renesas RZ/Five SoC OSTM block can be used as clocksource [0], to
> avoid multiple clock sources being registered as VDSO_CLOCKMODE_ARCHTIMER
> move setting of vdso_clock_mode in the riscv-timer driver instead of doing
> this in clocksource_arch_init() callback as done similarly for ARM/64
> architecture.
> 
> [0] drivers/clocksource/renesas-ostm.c
> 
> Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
> Tested-by: Samuel Holland <samuel@sholland.org>
> ---
> RFC -> v2
> * Dropped vdso_default static global variable
> * Used IS_ENABLED() macro
> * Included Tested-by from Samuel
> 
> RFC:
> https://patchwork.kernel.org/project/linux-renesas-soc/patch/20221211215843.24024-1-prabhakar.mahadev-lad.rj@bp.renesas.com/
> ---
>  arch/riscv/Kconfig                | 1 -
>  arch/riscv/kernel/time.c          | 9 ---------
>  drivers/clocksource/timer-riscv.c | 5 +++++
>  3 files changed, 5 insertions(+), 10 deletions(-)
> 
> diff --git a/arch/riscv/Kconfig b/arch/riscv/Kconfig
> index e2b656043abf..9c687da7756d 100644
> --- a/arch/riscv/Kconfig
> +++ b/arch/riscv/Kconfig
> @@ -12,7 +12,6 @@ config 32BIT
>  
>  config RISCV
>  	def_bool y
> -	select ARCH_CLOCKSOURCE_INIT
>  	select ARCH_ENABLE_HUGEPAGE_MIGRATION if HUGETLB_PAGE && MIGRATION
>  	select ARCH_ENABLE_SPLIT_PMD_PTLOCK if PGTABLE_LEVELS > 2
>  	select ARCH_HAS_BINFMT_FLAT
> diff --git a/arch/riscv/kernel/time.c b/arch/riscv/kernel/time.c
> index 8217b0f67c6c..42bee305e997 100644
> --- a/arch/riscv/kernel/time.c
> +++ b/arch/riscv/kernel/time.c
> @@ -30,12 +30,3 @@ void __init time_init(void)
>  	of_clk_init(NULL);
>  	timer_probe();
>  }
> -
> -void clocksource_arch_init(struct clocksource *cs)
> -{
> -#ifdef CONFIG_GENERIC_GETTIMEOFDAY
> -	cs->vdso_clock_mode = VDSO_CLOCKMODE_ARCHTIMER;
> -#else
> -	cs->vdso_clock_mode = VDSO_CLOCKMODE_NONE;
> -#endif
> -}
> diff --git a/drivers/clocksource/timer-riscv.c b/drivers/clocksource/timer-riscv.c
> index 55dad7965f43..c416e5e934bf 100644
> --- a/drivers/clocksource/timer-riscv.c
> +++ b/drivers/clocksource/timer-riscv.c
> @@ -77,6 +77,11 @@ static struct clocksource riscv_clocksource = {
>  	.mask		= CLOCKSOURCE_MASK(64),
>  	.flags		= CLOCK_SOURCE_IS_CONTINUOUS,
>  	.read		= riscv_clocksource_rdtime,
> +#if IS_ENABLED(CONFIG_GENERIC_GETTIMEOFDAY)
> +	.vdso_clock_mode = VDSO_CLOCKMODE_ARCHTIMER,
> +#else
> +	.vdso_clock_mode = VDSO_CLOCKMODE_NONE,

The else case isn't strictly necessary because VDSO_CLOCKMODE_NONE is
the default. Either way it looks fine to me.

Reviewed-by: Samuel Holland <samuel@sholland.org>

And I tested v2 as well.

Regards,
Samuel

> +#endif
>  };
>  
>  static int riscv_timer_starting_cpu(unsigned int cpu)

[tip: timers/core] clocksource/drivers/riscv: Get rid of clocksource_arch_init() callback

Posted by tip-bot2 for Lad Prabhakar 2 years, 7 months ago

The following commit has been merged into the timers/core branch of tip:

Commit-ID:     3aff0403f814df6ce2377a6ecf61dd7750a3925f
Gitweb:        https://git.kernel.org/tip/3aff0403f814df6ce2377a6ecf61dd7750a3925f
Author:        Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
AuthorDate:    Thu, 29 Dec 2022 22:46:01 
Committer:     Daniel Lezcano <daniel.lezcano@linaro.org>
CommitterDate: Mon, 13 Feb 2023 13:10:17 +01:00

clocksource/drivers/riscv: Get rid of clocksource_arch_init() callback

Having a clocksource_arch_init() callback always sets vdso_clock_mode to
VDSO_CLOCKMODE_ARCHTIMER if GENERIC_GETTIMEOFDAY is enabled, this is
required for the riscv-timer.

This works for platforms where just riscv-timer clocksource is present.
On platforms where other clock sources are available we want them to
register with vdso_clock_mode set to VDSO_CLOCKMODE_NONE.

On the Renesas RZ/Five SoC OSTM block can be used as clocksource [0], to
avoid multiple clock sources being registered as VDSO_CLOCKMODE_ARCHTIMER
move setting of vdso_clock_mode in the riscv-timer driver instead of doing
this in clocksource_arch_init() callback as done similarly for ARM/64
architecture.

[0] drivers/clocksource/renesas-ostm.c

Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Tested-by: Samuel Holland <samuel@sholland.org>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Samuel Holland <samuel@sholland.org>
Link: https://lore.kernel.org/r/20221229224601.103851-1-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
---
 arch/riscv/Kconfig                |  1 -
 arch/riscv/kernel/time.c          |  9 ---------
 drivers/clocksource/timer-riscv.c |  5 +++++
 3 files changed, 5 insertions(+), 10 deletions(-)

diff --git a/arch/riscv/Kconfig b/arch/riscv/Kconfig
index e2b6560..9c687da 100644
--- a/arch/riscv/Kconfig
+++ b/arch/riscv/Kconfig
@@ -12,7 +12,6 @@ config 32BIT
 
 config RISCV
 	def_bool y
-	select ARCH_CLOCKSOURCE_INIT
 	select ARCH_ENABLE_HUGEPAGE_MIGRATION if HUGETLB_PAGE && MIGRATION
 	select ARCH_ENABLE_SPLIT_PMD_PTLOCK if PGTABLE_LEVELS > 2
 	select ARCH_HAS_BINFMT_FLAT
diff --git a/arch/riscv/kernel/time.c b/arch/riscv/kernel/time.c
index 1cf21db..babaf3b 100644
--- a/arch/riscv/kernel/time.c
+++ b/arch/riscv/kernel/time.c
@@ -33,12 +33,3 @@ void __init time_init(void)
 
 	tick_setup_hrtimer_broadcast();
 }
-
-void clocksource_arch_init(struct clocksource *cs)
-{
-#ifdef CONFIG_GENERIC_GETTIMEOFDAY
-	cs->vdso_clock_mode = VDSO_CLOCKMODE_ARCHTIMER;
-#else
-	cs->vdso_clock_mode = VDSO_CLOCKMODE_NONE;
-#endif
-}
diff --git a/drivers/clocksource/timer-riscv.c b/drivers/clocksource/timer-riscv.c
index adf7f98..d8cb629 100644
--- a/drivers/clocksource/timer-riscv.c
+++ b/drivers/clocksource/timer-riscv.c
@@ -78,6 +78,11 @@ static struct clocksource riscv_clocksource = {
 	.mask		= CLOCKSOURCE_MASK(64),
 	.flags		= CLOCK_SOURCE_IS_CONTINUOUS,
 	.read		= riscv_clocksource_rdtime,
+#if IS_ENABLED(CONFIG_GENERIC_GETTIMEOFDAY)
+	.vdso_clock_mode = VDSO_CLOCKMODE_ARCHTIMER,
+#else
+	.vdso_clock_mode = VDSO_CLOCKMODE_NONE,
+#endif
 };
 
 static int riscv_timer_starting_cpu(unsigned int cpu)