In MT8192, we need to disable EXT_BUCK_ISO before turning on the ADSP
power pm-domains (mtcmos).

Add the MTK_SCPD_EXT_BUCK_ISO flag to control the buck isolation
setting in the mediatek power domain driver.

Fixes: 59b644b01cf4 ("soc: mediatek: Add MediaTek SCPSYS power domains")
Signed-off-by: Allen-KH Cheng <allen-kh.cheng@mediatek.com>
---
 drivers/soc/mediatek/mtk-pm-domains.c | 8 ++++++++
 drivers/soc/mediatek/mtk-pm-domains.h | 1 +
 2 files changed, 9 insertions(+)

diff --git a/drivers/soc/mediatek/mtk-pm-domains.c b/drivers/soc/mediatek/mtk-pm-domains.c
index 09e3c38b8466..63f1e183f645 100644
--- a/drivers/soc/mediatek/mtk-pm-domains.c
+++ b/drivers/soc/mediatek/mtk-pm-domains.c
@@ -218,6 +218,10 @@ static int scpsys_power_on(struct generic_pm_domain *genpd)
 	if (ret)
 		goto err_reg;
 
+	if (MTK_SCPD_CAPS(pd, MTK_SCPD_EXT_BUCK_ISO))
+		regmap_clear_bits(scpsys->base, pd->data->ext_buck_iso_offs,
+				  pd->data->ext_buck_iso_mask);
+
 	/* subsys power on */
 	regmap_set_bits(scpsys->base, pd->data->ctl_offs, PWR_ON_BIT);
 	regmap_set_bits(scpsys->base, pd->data->ctl_offs, PWR_ON_2ND_BIT);
@@ -272,6 +276,10 @@ static int scpsys_power_off(struct generic_pm_domain *genpd)
 	if (ret < 0)
 		return ret;
 
+	if (MTK_SCPD_CAPS(pd, MTK_SCPD_EXT_BUCK_ISO))
+		regmap_set_bits(scpsys->base, pd->data->ext_buck_iso_offs,
+				pd->data->ext_buck_iso_mask);
+
 	clk_bulk_disable_unprepare(pd->num_subsys_clks, pd->subsys_clks);
 
 	/* subsys power off */
diff --git a/drivers/soc/mediatek/mtk-pm-domains.h b/drivers/soc/mediatek/mtk-pm-domains.h
index a5f24c58e35a..5ec53ee073c4 100644
--- a/drivers/soc/mediatek/mtk-pm-domains.h
+++ b/drivers/soc/mediatek/mtk-pm-domains.h
@@ -10,6 +10,7 @@
 #define MTK_SCPD_DOMAIN_SUPPLY		BIT(4)
 /* can't set MTK_SCPD_KEEP_DEFAULT_OFF at the same time */
 #define MTK_SCPD_ALWAYS_ON		BIT(5)
+#define MTK_SCPD_EXT_BUCK_ISO		BIT(6)
 #define MTK_SCPD_CAPS(_scpd, _x)	((_scpd)->data->caps & (_x))
 
 #define SPM_VDE_PWR_CON			0x0210
-- 
2.18.0

Il 21/12/22 04:44, Allen-KH Cheng ha scritto:
> In MT8192, we need to disable EXT_BUCK_ISO before turning on the ADSP
> power pm-domains (mtcmos).
> 
> Add the MTK_SCPD_EXT_BUCK_ISO flag to control the buck isolation
> setting in the mediatek power domain driver.
> 
> Fixes: 59b644b01cf4 ("soc: mediatek: Add MediaTek SCPSYS power domains")
> Signed-off-by: Allen-KH Cheng <allen-kh.cheng@mediatek.com>
> ---
>   drivers/soc/mediatek/mtk-pm-domains.c | 8 ++++++++
>   drivers/soc/mediatek/mtk-pm-domains.h | 1 +
>   2 files changed, 9 insertions(+)
> 
> diff --git a/drivers/soc/mediatek/mtk-pm-domains.c b/drivers/soc/mediatek/mtk-pm-domains.c
> index 09e3c38b8466..63f1e183f645 100644
> --- a/drivers/soc/mediatek/mtk-pm-domains.c
> +++ b/drivers/soc/mediatek/mtk-pm-domains.c
> @@ -218,6 +218,10 @@ static int scpsys_power_on(struct generic_pm_domain *genpd)
>   	if (ret)
>   		goto err_reg;
>   
> +	if (MTK_SCPD_CAPS(pd, MTK_SCPD_EXT_BUCK_ISO))

if (pd->data->ext_buck_iso_offs && MTK_SCPD_CAPS(pd, MTK_SCPD_EXT_BUCK_ISO))
	regmap_[...etc]

...so that we validate that ext_buck_iso_offs is actually present (as I
suppose that this is supposed to *never* be 0x0).

Regards,
Angelo