arch/x86/kernel/cpu/resctrl/rdtgroup.c | 12 +++++++++++- 1 file changed, 11 insertions(+), 1 deletion(-)
When the user moves a running task to a new rdtgroup using the tasks
file interface or by deleting its rdtgroup, the resulting change in
CLOSID/RMID must be immediately propagated to the PQR_ASSOC MSR on the
task(s) CPUs.
x86 allows reordering loads with prior stores, so if the task starts
running between a task_curr() check that the CPU hoisted before the
stores in the CLOSID/RMID update then it can start running with the old
CLOSID/RMID until it is switched again because __rdtgroup_move_task()
failed to determine that it needs to be interrupted to obtain the new
CLOSID/RMID.
Refer to the diagram below:
CPU 0 CPU 1
----- -----
__rdtgroup_move_task():
curr <- t1->cpu->rq->curr
__schedule():
rq->curr <- t1
resctrl_sched_in():
t1->{closid,rmid} -> {1,1}
t1->{closid,rmid} <- {2,2}
if (curr == t1) // false
IPI(t1->cpu)
A similar race impacts rdt_move_group_tasks(), which updates tasks in a
deleted rdtgroup.
In both cases, use smp_mb() to order the task_struct::{closid,rmid}
stores before the loads in task_curr(). In particular, in the
rdt_move_group_tasks() case, simply execute an smp_mb() on every
iteration with a matching task.
It is possible to use a single smp_mb() in rdt_move_group_tasks(), but
this would require two passes and a means of remembering which
task_structs were updated in the first loop. However, benchmarking
results below showed too little performance impact in the simple
approach to justify implementing the two-pass approach.
Times below were collected using `perf stat` to measure the time to
remove a group containing a 1600-task, parallel workload.
CPU: Intel(R) Xeon(R) Platinum P-8136 CPU @ 2.00GHz (112 threads)
# mkdir /sys/fs/resctrl/test
# echo $$ > /sys/fs/resctrl/test/tasks
# perf bench sched messaging -g 40 -l 100000
task-clock time ranges collected using:
# perf stat rmdir /sys/fs/resctrl/test
Baseline: 1.54 - 1.60 ms
smp_mb() every matching task: 1.57 - 1.67 ms
Fixes: ae28d1aae48a ("x86/resctrl: Use an IPI instead of task_work_add() to update PQR_ASSOC MSR")
Fixes: 0efc89be9471 ("x86/intel_rdt: Update task closid immediately on CPU in rmdir and unmount")
Signed-off-by: Peter Newman <peternewman@google.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
---
Patch history:
v7:
- Remove exploit case added in v6 and un-CC stable
v6:
- Explain exploit case in changelog for stable
- Add Fixes: lines
v5:
- Just put an smp_mb() between CLOSID/RMID stores and task_curr() calls
- Add a diagram detailing the race to the changelog
v4:
- Reorder the patches so that justification for sending more IPIs can
reference the patch fixing __rdtgroup_move_task().
- Correct tense of wording used in changelog and comments
v3:
- Split the handling of multi-task and single-task operations into
separate patches, now that they're handled differently.
- Clarify justification in the commit message, including moving some of
it out of inline code comment.
v2:
- Following Reinette's suggestion: use task_call_func() for single
task, IPI broadcast for group movements.
- Rebased to v6.1-rc4
v1: https://lore.kernel.org/lkml/20221103141641.3055981-1-peternewman@google.com/
v2: https://lore.kernel.org/lkml/20221110135346.2209839-1-peternewman@google.com/
v3: https://lore.kernel.org/lkml/20221115141953.816851-1-peternewman@google.com/
v4: https://lore.kernel.org/lkml/20221129111055.953833-1-peternewman@google.com/
v5: https://lore.kernel.org/lkml/20221214114447.1935755-1-peternewman@google.com/
v6: https://lore.kernel.org/lkml/20221216133125.3159406-1-peternewman@google.com/
---
arch/x86/kernel/cpu/resctrl/rdtgroup.c | 12 +++++++++++-
1 file changed, 11 insertions(+), 1 deletion(-)
diff --git a/arch/x86/kernel/cpu/resctrl/rdtgroup.c b/arch/x86/kernel/cpu/resctrl/rdtgroup.c
index e5a48f05e787..5993da21d822 100644
--- a/arch/x86/kernel/cpu/resctrl/rdtgroup.c
+++ b/arch/x86/kernel/cpu/resctrl/rdtgroup.c
@@ -580,8 +580,10 @@ static int __rdtgroup_move_task(struct task_struct *tsk,
/*
* Ensure the task's closid and rmid are written before determining if
* the task is current that will decide if it will be interrupted.
+ * This pairs with the full barrier between the rq->curr update and
+ * resctrl_sched_in() during context switch.
*/
- barrier();
+ smp_mb();
/*
* By now, the task's closid and rmid are set. If the task is current
@@ -2401,6 +2403,14 @@ static void rdt_move_group_tasks(struct rdtgroup *from, struct rdtgroup *to,
WRITE_ONCE(t->closid, to->closid);
WRITE_ONCE(t->rmid, to->mon.rmid);
+ /*
+ * Order the closid/rmid stores above before the loads
+ * in task_curr(). This pairs with the full barrier
+ * between the rq->curr update and resctrl_sched_in()
+ * during context switch.
+ */
+ smp_mb();
+
/*
* If the task is on a CPU, set the CPU in the mask.
* The detection is inaccurate as tasks might move or
base-commit: 830b3c68c1fb1e9176028d02ef86f3cf76aa2476
--
2.39.0.314.g84b9a713c41-googRan few tests with this patch on AMD systems. They are all looking good. Reviewed-by: Babu Moger <babu.moger@amd.com> -- Thanks Babu Moger
The following commit has been merged into the x86/urgent branch of tip:
Commit-ID: fe1f0714385fbcf76b0cbceb02b7277d842014fc
Gitweb: https://git.kernel.org/tip/fe1f0714385fbcf76b0cbceb02b7277d842014fc
Author: Peter Newman <peternewman@google.com>
AuthorDate: Tue, 20 Dec 2022 17:11:23 +01:00
Committer: Borislav Petkov (AMD) <bp@alien8.de>
CommitterDate: Tue, 10 Jan 2023 19:47:30 +01:00
x86/resctrl: Fix task CLOSID/RMID update race
When the user moves a running task to a new rdtgroup using the task's
file interface or by deleting its rdtgroup, the resulting change in
CLOSID/RMID must be immediately propagated to the PQR_ASSOC MSR on the
task(s) CPUs.
x86 allows reordering loads with prior stores, so if the task starts
running between a task_curr() check that the CPU hoisted before the
stores in the CLOSID/RMID update then it can start running with the old
CLOSID/RMID until it is switched again because __rdtgroup_move_task()
failed to determine that it needs to be interrupted to obtain the new
CLOSID/RMID.
Refer to the diagram below:
CPU 0 CPU 1
----- -----
__rdtgroup_move_task():
curr <- t1->cpu->rq->curr
__schedule():
rq->curr <- t1
resctrl_sched_in():
t1->{closid,rmid} -> {1,1}
t1->{closid,rmid} <- {2,2}
if (curr == t1) // false
IPI(t1->cpu)
A similar race impacts rdt_move_group_tasks(), which updates tasks in a
deleted rdtgroup.
In both cases, use smp_mb() to order the task_struct::{closid,rmid}
stores before the loads in task_curr(). In particular, in the
rdt_move_group_tasks() case, simply execute an smp_mb() on every
iteration with a matching task.
It is possible to use a single smp_mb() in rdt_move_group_tasks(), but
this would require two passes and a means of remembering which
task_structs were updated in the first loop. However, benchmarking
results below showed too little performance impact in the simple
approach to justify implementing the two-pass approach.
Times below were collected using `perf stat` to measure the time to
remove a group containing a 1600-task, parallel workload.
CPU: Intel(R) Xeon(R) Platinum P-8136 CPU @ 2.00GHz (112 threads)
# mkdir /sys/fs/resctrl/test
# echo $$ > /sys/fs/resctrl/test/tasks
# perf bench sched messaging -g 40 -l 100000
task-clock time ranges collected using:
# perf stat rmdir /sys/fs/resctrl/test
Baseline: 1.54 - 1.60 ms
smp_mb() every matching task: 1.57 - 1.67 ms
[ bp: Massage commit message. ]
Fixes: ae28d1aae48a ("x86/resctrl: Use an IPI instead of task_work_add() to update PQR_ASSOC MSR")
Fixes: 0efc89be9471 ("x86/intel_rdt: Update task closid immediately on CPU in rmdir and unmount")
Signed-off-by: Peter Newman <peternewman@google.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Babu Moger <babu.moger@amd.com>
Cc: <stable@kernel.org>
Link: https://lore.kernel.org/r/20221220161123.432120-1-peternewman@google.com
---
arch/x86/kernel/cpu/resctrl/rdtgroup.c | 12 +++++++++++-
1 file changed, 11 insertions(+), 1 deletion(-)
diff --git a/arch/x86/kernel/cpu/resctrl/rdtgroup.c b/arch/x86/kernel/cpu/resctrl/rdtgroup.c
index e5a48f0..5993da2 100644
--- a/arch/x86/kernel/cpu/resctrl/rdtgroup.c
+++ b/arch/x86/kernel/cpu/resctrl/rdtgroup.c
@@ -580,8 +580,10 @@ static int __rdtgroup_move_task(struct task_struct *tsk,
/*
* Ensure the task's closid and rmid are written before determining if
* the task is current that will decide if it will be interrupted.
+ * This pairs with the full barrier between the rq->curr update and
+ * resctrl_sched_in() during context switch.
*/
- barrier();
+ smp_mb();
/*
* By now, the task's closid and rmid are set. If the task is current
@@ -2402,6 +2404,14 @@ static void rdt_move_group_tasks(struct rdtgroup *from, struct rdtgroup *to,
WRITE_ONCE(t->rmid, to->mon.rmid);
/*
+ * Order the closid/rmid stores above before the loads
+ * in task_curr(). This pairs with the full barrier
+ * between the rq->curr update and resctrl_sched_in()
+ * during context switch.
+ */
+ smp_mb();
+
+ /*
* If the task is on a CPU, set the CPU in the mask.
* The detection is inaccurate as tasks might move or
* schedule before the smp function call takes place.© 2016 - 2025 Red Hat, Inc.