Add Qualcomm Universal Peripheral nodes with SPI and I2C Serial Engines.
QUP 0 only has two SPIs at index 0 and 2, QUP 1 has four SPIs with a gap
in the middle (ranging from 5-9 with SPI 7 missing). Both QUPs have 5
I2C Serial Engines.
Signed-off-by: Martin Botka <martin.botka@somainline.org>
[Marijn: Add iommus, reword patch description, reorder all properties,
sort based on address, use QCOM_GPI_ constants, drop dma cells from 5
to 3]
Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
---
arch/arm64/boot/dts/qcom/sm6125.dtsi | 298 +++++++++++++++++++++++++++
1 file changed, 298 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/sm6125.dtsi b/arch/arm64/boot/dts/qcom/sm6125.dtsi
index 5fc304b2da63..36ba74b5ad89 100644
--- a/arch/arm64/boot/dts/qcom/sm6125.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm6125.dtsi
@@ -753,6 +753,138 @@ gpi_dma0: dma-controller@4a00000 {
status = "disabled";
};
+ qupv3_id_0: geniqup@4ac0000 {
+ compatible = "qcom,geni-se-qup";
+ reg = <0x04ac0000 0x2000>;
+ clocks = <&gcc GCC_QUPV3_WRAP_0_M_AHB_CLK>,
+ <&gcc GCC_QUPV3_WRAP_0_S_AHB_CLK>;
+ clock-names = "m-ahb", "s-ahb";
+ iommus = <&apps_smmu 0x123 0x0>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+ status = "disabled";
+
+ i2c0: i2c@4a80000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0x04a80000 0x4000>;
+ clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>;
+ clock-names = "se";
+ interrupts = <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>;
+ pinctrl-0 = <&qup_i2c0_default>;
+ pinctrl-1 = <&qup_i2c0_sleep>;
+ pinctrl-names = "default", "sleep";
+ dmas = <&gpi_dma0 0 0 QCOM_GPI_I2C>,
+ <&gpi_dma0 1 0 QCOM_GPI_I2C>;
+ dma-names = "tx", "rx";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ spi0: spi@4a80000 {
+ compatible = "qcom,geni-spi";
+ reg = <0x04a80000 0x4000>;
+ clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>;
+ clock-names = "se";
+ interrupts = <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>;
+ pinctrl-0 = <&qup_spi0_default>;
+ pinctrl-1 = <&qup_spi0_sleep>;
+ pinctrl-names = "default", "sleep";
+ dmas = <&gpi_dma0 0 0 QCOM_GPI_SPI>,
+ <&gpi_dma0 1 0 QCOM_GPI_SPI>;
+ dma-names = "tx", "rx";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c1: i2c@4a84000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0x04a84000 0x4000>;
+ clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>;
+ clock-names = "se";
+ interrupts = <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>;
+ pinctrl-0 = <&qup_i2c1_default>;
+ pinctrl-1 = <&qup_i2c1_sleep>;
+ pinctrl-names = "default", "sleep";
+ dmas = <&gpi_dma0 0 1 QCOM_GPI_I2C>,
+ <&gpi_dma0 1 1 QCOM_GPI_I2C>;
+ dma-names = "tx", "rx";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c2: i2c@4a88000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0x04a88000 0x4000>;
+ clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>;
+ clock-names = "se";
+ interrupts = <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>;
+ pinctrl-0 = <&qup_i2c2_default>;
+ pinctrl-1 = <&qup_i2c2_sleep>;
+ pinctrl-names = "default", "sleep";
+ dmas = <&gpi_dma0 0 2 QCOM_GPI_I2C>,
+ <&gpi_dma0 1 2 QCOM_GPI_I2C>;
+ dma-names = "tx", "rx";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ spi2: spi@4a88000 {
+ compatible = "qcom,geni-spi";
+ reg = <0x04a88000 0x4000>;
+ clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>;
+ clock-names = "se";
+ interrupts = <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>;
+ pinctrl-0 = <&qup_spi2_default>;
+ pinctrl-1 = <&qup_spi2_sleep>;
+ pinctrl-names = "default", "sleep";
+ dmas = <&gpi_dma0 0 2 QCOM_GPI_SPI>,
+ <&gpi_dma0 1 2 QCOM_GPI_SPI>;
+ dma-names = "tx", "rx";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c3: i2c@4a8c000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0x04a8c000 0x4000>;
+ clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>;
+ clock-names = "se";
+ interrupts = <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>;
+ pinctrl-0 = <&qup_i2c3_default>;
+ pinctrl-1 = <&qup_i2c3_sleep>;
+ pinctrl-names = "default", "sleep";
+ dmas = <&gpi_dma0 0 3 QCOM_GPI_I2C>,
+ <&gpi_dma0 1 3 QCOM_GPI_I2C>;
+ dma-names = "tx", "rx";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c4: i2c@4a90000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0x04a90000 0x4000>;
+ clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>;
+ clock-names = "se";
+ interrupts = <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>;
+ pinctrl-0 = <&qup_i2c4_default>;
+ pinctrl-1 = <&qup_i2c4_sleep>;
+ pinctrl-names = "default", "sleep";
+ dmas = <&gpi_dma0 0 4 QCOM_GPI_I2C>,
+ <&gpi_dma0 1 4 QCOM_GPI_I2C>;
+ dma-names = "tx", "rx";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+ };
+
gpi_dma1: dma-controller@4c00000 {
compatible = "qcom,sm6125-gpi-dma", "qcom,sdm845-gpi-dma";
reg = <0x04c00000 0x60000>;
@@ -771,6 +903,172 @@ gpi_dma1: dma-controller@4c00000 {
status = "disabled";
};
+ qupv3_id_1: geniqup@4cc0000 {
+ compatible = "qcom,geni-se-qup";
+ reg = <0x04cc0000 0x2000>;
+ clocks = <&gcc GCC_QUPV3_WRAP_1_M_AHB_CLK>,
+ <&gcc GCC_QUPV3_WRAP_1_S_AHB_CLK>;
+ clock-names = "m-ahb", "s-ahb";
+ iommus = <&apps_smmu 0x143 0x0>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+ status = "disabled";
+
+ i2c5: i2c@4c80000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0x04c80000 0x4000>;
+ clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>;
+ clock-names = "se";
+ interrupts = <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>;
+ pinctrl-0 = <&qup_i2c5_default>;
+ pinctrl-1 = <&qup_i2c5_sleep>;
+ pinctrl-names = "default", "sleep";
+ dmas = <&gpi_dma1 0 0 QCOM_GPI_I2C>,
+ <&gpi_dma1 1 0 QCOM_GPI_I2C>;
+ dma-names = "tx", "rx";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ spi5: spi@4c80000 {
+ compatible = "qcom,geni-spi";
+ reg = <0x04c80000 0x4000>;
+ clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>;
+ clock-names = "se";
+ interrupts = <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>;
+ pinctrl-0 = <&qup_spi5_default>;
+ pinctrl-1 = <&qup_spi5_sleep>;
+ pinctrl-names = "default", "sleep";
+ dmas = <&gpi_dma1 0 0 QCOM_GPI_SPI>,
+ <&gpi_dma1 1 0 QCOM_GPI_SPI>;
+ dma-names = "tx", "rx";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c6: i2c@4c84000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0x04c84000 0x4000>;
+ clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>;
+ clock-names = "se";
+ interrupts = <GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH>;
+ pinctrl-0 = <&qup_i2c6_default>;
+ pinctrl-1 = <&qup_i2c6_sleep>;
+ pinctrl-names = "default", "sleep";
+ dmas = <&gpi_dma1 0 1 QCOM_GPI_I2C>,
+ <&gpi_dma1 1 1 QCOM_GPI_I2C>;
+ dma-names = "tx", "rx";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ spi6: spi@4c84000 {
+ compatible = "qcom,geni-spi";
+ reg = <0x04c84000 0x4000>;
+ clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>;
+ clock-names = "se";
+ interrupts = <GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH>;
+ pinctrl-0 = <&qup_spi6_default>;
+ pinctrl-1 = <&qup_spi6_sleep>;
+ pinctrl-names = "default", "sleep";
+ dmas = <&gpi_dma1 0 1 QCOM_GPI_SPI>,
+ <&gpi_dma1 1 1 QCOM_GPI_SPI>;
+ dma-names = "tx", "rx";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c7: i2c@4c88000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0x04c88000 0x4000>;
+ clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>;
+ clock-names = "se";
+ interrupts = <GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH>;
+ pinctrl-0 = <&qup_i2c7_default>;
+ pinctrl-1 = <&qup_i2c7_sleep>;
+ pinctrl-names = "default", "sleep";
+ dmas = <&gpi_dma1 0 2 QCOM_GPI_I2C>,
+ <&gpi_dma1 1 2 QCOM_GPI_I2C>;
+ dma-names = "tx", "rx";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c8: i2c@4c8c000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0x04c8c000 0x4000>;
+ clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>;
+ clock-names = "se";
+ interrupts = <GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH>;
+ pinctrl-0 = <&qup_i2c8_default>;
+ pinctrl-1 = <&qup_i2c8_sleep>;
+ pinctrl-names = "default", "sleep";
+ dmas = <&gpi_dma1 0 3 QCOM_GPI_I2C>,
+ <&gpi_dma1 1 3 QCOM_GPI_I2C>;
+ dma-names = "tx", "rx";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ spi8: spi@4c8c000 {
+ compatible = "qcom,geni-spi";
+ reg = <0x04c8c000 0x4000>;
+ clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>;
+ clock-names = "se";
+ interrupts = <GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH>;
+ pinctrl-0 = <&qup_spi8_default>;
+ pinctrl-1 = <&qup_spi8_sleep>;
+ pinctrl-names = "default", "sleep";
+ dmas = <&gpi_dma1 0 3 QCOM_GPI_SPI>,
+ <&gpi_dma1 1 3 QCOM_GPI_SPI>;
+ dma-names = "tx", "rx";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c9: i2c@4c90000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0x04c90000 0x4000>;
+ clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>;
+ clock-names = "se";
+ interrupts = <GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH>;
+ pinctrl-0 = <&qup_i2c9_default>;
+ pinctrl-1 = <&qup_i2c9_sleep>;
+ pinctrl-names = "default", "sleep";
+ dmas = <&gpi_dma1 0 4 QCOM_GPI_I2C>,
+ <&gpi_dma1 1 4 QCOM_GPI_I2C>;
+ dma-names = "tx", "rx";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ spi9: spi@4c90000 {
+ compatible = "qcom,geni-spi";
+ reg = <0x04c90000 0x4000>;
+ clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>;
+ clock-names = "se";
+ interrupts = <GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH>;
+ pinctrl-0 = <&qup_spi9_default>;
+ pinctrl-1 = <&qup_spi9_sleep>;
+ pinctrl-names = "default", "sleep";
+ dmas = <&gpi_dma1 0 4 QCOM_GPI_SPI>,
+ <&gpi_dma1 1 4 QCOM_GPI_SPI>;
+ dma-names = "tx", "rx";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+ };
+
usb3: usb@4ef8800 {
compatible = "qcom,sm6125-dwc3", "qcom,dwc3";
reg = <0x04ef8800 0x400>;
--
2.39.0
On Sat, Dec 17 2022 at 12:34:07 AM +01:00:00, Marijn Suijten
<marijn.suijten@somainline.org> wrote:
> Add Qualcomm Universal Peripheral nodes with SPI and I2C Serial
> Engines.
> QUP 0 only has two SPIs at index 0 and 2, QUP 1 has four SPIs with a
> gap
> in the middle (ranging from 5-9 with SPI 7 missing). Both QUPs have 5
> I2C Serial Engines.
>
> Signed-off-by: Martin Botka <martin.botka@somainline.org>
> [Marijn: Add iommus, reword patch description, reorder all properties,
> sort based on address, use QCOM_GPI_ constants, drop dma cells from 5
> to 3]
> Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
> ---
> arch/arm64/boot/dts/qcom/sm6125.dtsi | 298
> +++++++++++++++++++++++++++
> 1 file changed, 298 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/qcom/sm6125.dtsi
> b/arch/arm64/boot/dts/qcom/sm6125.dtsi
> index 5fc304b2da63..36ba74b5ad89 100644
> --- a/arch/arm64/boot/dts/qcom/sm6125.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sm6125.dtsi
> @@ -753,6 +753,138 @@ gpi_dma0: dma-controller@4a00000 {
> status = "disabled";
> };
>
> + qupv3_id_0: geniqup@4ac0000 {
> + compatible = "qcom,geni-se-qup";
> + reg = <0x04ac0000 0x2000>;
> + clocks = <&gcc GCC_QUPV3_WRAP_0_M_AHB_CLK>,
> + <&gcc GCC_QUPV3_WRAP_0_S_AHB_CLK>;
> + clock-names = "m-ahb", "s-ahb";
> + iommus = <&apps_smmu 0x123 0x0>;
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges;
> + status = "disabled";
> +
> + i2c0: i2c@4a80000 {
> + compatible = "qcom,geni-i2c";
> + reg = <0x04a80000 0x4000>;
> + clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>;
> + clock-names = "se";
> + interrupts = <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>;
> + pinctrl-0 = <&qup_i2c0_default>;
> + pinctrl-1 = <&qup_i2c0_sleep>;
> + pinctrl-names = "default", "sleep";
> + dmas = <&gpi_dma0 0 0 QCOM_GPI_I2C>,
> + <&gpi_dma0 1 0 QCOM_GPI_I2C>;
> + dma-names = "tx", "rx";
> + #address-cells = <1>;
> + #size-cells = <0>;
> + status = "disabled";
> + };
> +
> + spi0: spi@4a80000 {
> + compatible = "qcom,geni-spi";
> + reg = <0x04a80000 0x4000>;
> + clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>;
> + clock-names = "se";
> + interrupts = <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>;
> + pinctrl-0 = <&qup_spi0_default>;
> + pinctrl-1 = <&qup_spi0_sleep>;
> + pinctrl-names = "default", "sleep";
> + dmas = <&gpi_dma0 0 0 QCOM_GPI_SPI>,
> + <&gpi_dma0 1 0 QCOM_GPI_SPI>;
> + dma-names = "tx", "rx";
> + #address-cells = <1>;
> + #size-cells = <0>;
> + status = "disabled";
> + };
> +
> + i2c1: i2c@4a84000 {
> + compatible = "qcom,geni-i2c";
> + reg = <0x04a84000 0x4000>;
> + clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>;
> + clock-names = "se";
> + interrupts = <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>;
> + pinctrl-0 = <&qup_i2c1_default>;
> + pinctrl-1 = <&qup_i2c1_sleep>;
> + pinctrl-names = "default", "sleep";
> + dmas = <&gpi_dma0 0 1 QCOM_GPI_I2C>,
> + <&gpi_dma0 1 1 QCOM_GPI_I2C>;
> + dma-names = "tx", "rx";
> + #address-cells = <1>;
> + #size-cells = <0>;
> + status = "disabled";
> + };
> +
> + i2c2: i2c@4a88000 {
> + compatible = "qcom,geni-i2c";
> + reg = <0x04a88000 0x4000>;
> + clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>;
> + clock-names = "se";
> + interrupts = <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>;
> + pinctrl-0 = <&qup_i2c2_default>;
> + pinctrl-1 = <&qup_i2c2_sleep>;
> + pinctrl-names = "default", "sleep";
> + dmas = <&gpi_dma0 0 2 QCOM_GPI_I2C>,
> + <&gpi_dma0 1 2 QCOM_GPI_I2C>;
> + dma-names = "tx", "rx";
> + #address-cells = <1>;
> + #size-cells = <0>;
> + status = "disabled";
> + };
> +
> + spi2: spi@4a88000 {
> + compatible = "qcom,geni-spi";
> + reg = <0x04a88000 0x4000>;
> + clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>;
> + clock-names = "se";
> + interrupts = <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>;
> + pinctrl-0 = <&qup_spi2_default>;
> + pinctrl-1 = <&qup_spi2_sleep>;
> + pinctrl-names = "default", "sleep";
> + dmas = <&gpi_dma0 0 2 QCOM_GPI_SPI>,
> + <&gpi_dma0 1 2 QCOM_GPI_SPI>;
> + dma-names = "tx", "rx";
> + #address-cells = <1>;
> + #size-cells = <0>;
> + status = "disabled";
> + };
> +
> + i2c3: i2c@4a8c000 {
> + compatible = "qcom,geni-i2c";
> + reg = <0x04a8c000 0x4000>;
> + clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>;
> + clock-names = "se";
> + interrupts = <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>;
> + pinctrl-0 = <&qup_i2c3_default>;
> + pinctrl-1 = <&qup_i2c3_sleep>;
> + pinctrl-names = "default", "sleep";
> + dmas = <&gpi_dma0 0 3 QCOM_GPI_I2C>,
> + <&gpi_dma0 1 3 QCOM_GPI_I2C>;
> + dma-names = "tx", "rx";
> + #address-cells = <1>;
> + #size-cells = <0>;
> + status = "disabled";
> + };
> +
> + i2c4: i2c@4a90000 {
> + compatible = "qcom,geni-i2c";
> + reg = <0x04a90000 0x4000>;
> + clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>;
> + clock-names = "se";
> + interrupts = <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>;
> + pinctrl-0 = <&qup_i2c4_default>;
> + pinctrl-1 = <&qup_i2c4_sleep>;
> + pinctrl-names = "default", "sleep";
> + dmas = <&gpi_dma0 0 4 QCOM_GPI_I2C>,
> + <&gpi_dma0 1 4 QCOM_GPI_I2C>;
> + dma-names = "tx", "rx";
> + #address-cells = <1>;
> + #size-cells = <0>;
> + status = "disabled";
> + };
> + };
> +
> gpi_dma1: dma-controller@4c00000 {
> compatible = "qcom,sm6125-gpi-dma", "qcom,sdm845-gpi-dma";
> reg = <0x04c00000 0x60000>;
> @@ -771,6 +903,172 @@ gpi_dma1: dma-controller@4c00000 {
> status = "disabled";
> };
>
> + qupv3_id_1: geniqup@4cc0000 {
> + compatible = "qcom,geni-se-qup";
> + reg = <0x04cc0000 0x2000>;
> + clocks = <&gcc GCC_QUPV3_WRAP_1_M_AHB_CLK>,
> + <&gcc GCC_QUPV3_WRAP_1_S_AHB_CLK>;
> + clock-names = "m-ahb", "s-ahb";
> + iommus = <&apps_smmu 0x143 0x0>;
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges;
> + status = "disabled";
> +
> + i2c5: i2c@4c80000 {
> + compatible = "qcom,geni-i2c";
> + reg = <0x04c80000 0x4000>;
> + clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>;
> + clock-names = "se";
> + interrupts = <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>;
> + pinctrl-0 = <&qup_i2c5_default>;
> + pinctrl-1 = <&qup_i2c5_sleep>;
> + pinctrl-names = "default", "sleep";
> + dmas = <&gpi_dma1 0 0 QCOM_GPI_I2C>,
> + <&gpi_dma1 1 0 QCOM_GPI_I2C>;
> + dma-names = "tx", "rx";
> + #address-cells = <1>;
> + #size-cells = <0>;
> + status = "disabled";
> + };
> +
> + spi5: spi@4c80000 {
> + compatible = "qcom,geni-spi";
> + reg = <0x04c80000 0x4000>;
> + clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>;
> + clock-names = "se";
> + interrupts = <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>;
> + pinctrl-0 = <&qup_spi5_default>;
> + pinctrl-1 = <&qup_spi5_sleep>;
> + pinctrl-names = "default", "sleep";
> + dmas = <&gpi_dma1 0 0 QCOM_GPI_SPI>,
> + <&gpi_dma1 1 0 QCOM_GPI_SPI>;
> + dma-names = "tx", "rx";
> + #address-cells = <1>;
> + #size-cells = <0>;
> + status = "disabled";
> + };
> +
> + i2c6: i2c@4c84000 {
> + compatible = "qcom,geni-i2c";
> + reg = <0x04c84000 0x4000>;
> + clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>;
> + clock-names = "se";
> + interrupts = <GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH>;
> + pinctrl-0 = <&qup_i2c6_default>;
> + pinctrl-1 = <&qup_i2c6_sleep>;
> + pinctrl-names = "default", "sleep";
> + dmas = <&gpi_dma1 0 1 QCOM_GPI_I2C>,
> + <&gpi_dma1 1 1 QCOM_GPI_I2C>;
> + dma-names = "tx", "rx";
> + #address-cells = <1>;
> + #size-cells = <0>;
> + status = "disabled";
> + };
> +
> + spi6: spi@4c84000 {
> + compatible = "qcom,geni-spi";
> + reg = <0x04c84000 0x4000>;
> + clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>;
> + clock-names = "se";
> + interrupts = <GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH>;
> + pinctrl-0 = <&qup_spi6_default>;
> + pinctrl-1 = <&qup_spi6_sleep>;
> + pinctrl-names = "default", "sleep";
> + dmas = <&gpi_dma1 0 1 QCOM_GPI_SPI>,
> + <&gpi_dma1 1 1 QCOM_GPI_SPI>;
> + dma-names = "tx", "rx";
> + #address-cells = <1>;
> + #size-cells = <0>;
> + status = "disabled";
> + };
> +
> + i2c7: i2c@4c88000 {
> + compatible = "qcom,geni-i2c";
> + reg = <0x04c88000 0x4000>;
> + clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>;
> + clock-names = "se";
> + interrupts = <GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH>;
> + pinctrl-0 = <&qup_i2c7_default>;
> + pinctrl-1 = <&qup_i2c7_sleep>;
> + pinctrl-names = "default", "sleep";
> + dmas = <&gpi_dma1 0 2 QCOM_GPI_I2C>,
> + <&gpi_dma1 1 2 QCOM_GPI_I2C>;
> + dma-names = "tx", "rx";
> + #address-cells = <1>;
> + #size-cells = <0>;
> + status = "disabled";
> + };
> +
> + i2c8: i2c@4c8c000 {
> + compatible = "qcom,geni-i2c";
> + reg = <0x04c8c000 0x4000>;
> + clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>;
> + clock-names = "se";
> + interrupts = <GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH>;
> + pinctrl-0 = <&qup_i2c8_default>;
> + pinctrl-1 = <&qup_i2c8_sleep>;
> + pinctrl-names = "default", "sleep";
> + dmas = <&gpi_dma1 0 3 QCOM_GPI_I2C>,
> + <&gpi_dma1 1 3 QCOM_GPI_I2C>;
> + dma-names = "tx", "rx";
> + #address-cells = <1>;
> + #size-cells = <0>;
> + status = "disabled";
> + };
> +
> + spi8: spi@4c8c000 {
> + compatible = "qcom,geni-spi";
> + reg = <0x04c8c000 0x4000>;
> + clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>;
> + clock-names = "se";
> + interrupts = <GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH>;
> + pinctrl-0 = <&qup_spi8_default>;
> + pinctrl-1 = <&qup_spi8_sleep>;
> + pinctrl-names = "default", "sleep";
> + dmas = <&gpi_dma1 0 3 QCOM_GPI_SPI>,
> + <&gpi_dma1 1 3 QCOM_GPI_SPI>;
> + dma-names = "tx", "rx";
> + #address-cells = <1>;
> + #size-cells = <0>;
> + status = "disabled";
> + };
> +
> + i2c9: i2c@4c90000 {
> + compatible = "qcom,geni-i2c";
> + reg = <0x04c90000 0x4000>;
> + clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>;
> + clock-names = "se";
> + interrupts = <GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH>;
> + pinctrl-0 = <&qup_i2c9_default>;
> + pinctrl-1 = <&qup_i2c9_sleep>;
> + pinctrl-names = "default", "sleep";
> + dmas = <&gpi_dma1 0 4 QCOM_GPI_I2C>,
> + <&gpi_dma1 1 4 QCOM_GPI_I2C>;
> + dma-names = "tx", "rx";
> + #address-cells = <1>;
> + #size-cells = <0>;
> + status = "disabled";
> + };
> +
> + spi9: spi@4c90000 {
> + compatible = "qcom,geni-spi";
> + reg = <0x04c90000 0x4000>;
> + clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>;
> + clock-names = "se";
> + interrupts = <GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH>;
> + pinctrl-0 = <&qup_spi9_default>;
> + pinctrl-1 = <&qup_spi9_sleep>;
> + pinctrl-names = "default", "sleep";
> + dmas = <&gpi_dma1 0 4 QCOM_GPI_SPI>,
> + <&gpi_dma1 1 4 QCOM_GPI_SPI>;
> + dma-names = "tx", "rx";
> + #address-cells = <1>;
> + #size-cells = <0>;
> + status = "disabled";
> + };
> + };
> +
> usb3: usb@4ef8800 {
> compatible = "qcom,sm6125-dwc3", "qcom,dwc3";
> reg = <0x04ef8800 0x400>;
> --
> 2.39.0
>
Reviewed-by: Martin Botka <martin.botka@somainline.org>
-Martin
On 17.12.2022 00:34, Marijn Suijten wrote:
> Add Qualcomm Universal Peripheral nodes with SPI and I2C Serial Engines.
> QUP 0 only has two SPIs at index 0 and 2, QUP 1 has four SPIs with a gap
> in the middle (ranging from 5-9 with SPI 7 missing). Both QUPs have 5
> I2C Serial Engines.
>
> Signed-off-by: Martin Botka <martin.botka@somainline.org>
> [Marijn: Add iommus, reword patch description, reorder all properties,
> sort based on address, use QCOM_GPI_ constants, drop dma cells from 5
> to 3]
> Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
> ---
Modulo the comment about 0x0/0 in iommus= (let's hear what
others think):
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Konrad
> arch/arm64/boot/dts/qcom/sm6125.dtsi | 298 +++++++++++++++++++++++++++
> 1 file changed, 298 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/qcom/sm6125.dtsi b/arch/arm64/boot/dts/qcom/sm6125.dtsi
> index 5fc304b2da63..36ba74b5ad89 100644
> --- a/arch/arm64/boot/dts/qcom/sm6125.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sm6125.dtsi
> @@ -753,6 +753,138 @@ gpi_dma0: dma-controller@4a00000 {
> status = "disabled";
> };
>
> + qupv3_id_0: geniqup@4ac0000 {
> + compatible = "qcom,geni-se-qup";
> + reg = <0x04ac0000 0x2000>;
> + clocks = <&gcc GCC_QUPV3_WRAP_0_M_AHB_CLK>,
> + <&gcc GCC_QUPV3_WRAP_0_S_AHB_CLK>;
> + clock-names = "m-ahb", "s-ahb";
> + iommus = <&apps_smmu 0x123 0x0>;
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges;
> + status = "disabled";
> +
> + i2c0: i2c@4a80000 {
> + compatible = "qcom,geni-i2c";
> + reg = <0x04a80000 0x4000>;
> + clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>;
> + clock-names = "se";
> + interrupts = <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>;
> + pinctrl-0 = <&qup_i2c0_default>;
> + pinctrl-1 = <&qup_i2c0_sleep>;
> + pinctrl-names = "default", "sleep";
> + dmas = <&gpi_dma0 0 0 QCOM_GPI_I2C>,
> + <&gpi_dma0 1 0 QCOM_GPI_I2C>;
> + dma-names = "tx", "rx";
> + #address-cells = <1>;
> + #size-cells = <0>;
> + status = "disabled";
> + };
> +
> + spi0: spi@4a80000 {
> + compatible = "qcom,geni-spi";
> + reg = <0x04a80000 0x4000>;
> + clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>;
> + clock-names = "se";
> + interrupts = <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>;
> + pinctrl-0 = <&qup_spi0_default>;
> + pinctrl-1 = <&qup_spi0_sleep>;
> + pinctrl-names = "default", "sleep";
> + dmas = <&gpi_dma0 0 0 QCOM_GPI_SPI>,
> + <&gpi_dma0 1 0 QCOM_GPI_SPI>;
> + dma-names = "tx", "rx";
> + #address-cells = <1>;
> + #size-cells = <0>;
> + status = "disabled";
> + };
> +
> + i2c1: i2c@4a84000 {
> + compatible = "qcom,geni-i2c";
> + reg = <0x04a84000 0x4000>;
> + clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>;
> + clock-names = "se";
> + interrupts = <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>;
> + pinctrl-0 = <&qup_i2c1_default>;
> + pinctrl-1 = <&qup_i2c1_sleep>;
> + pinctrl-names = "default", "sleep";
> + dmas = <&gpi_dma0 0 1 QCOM_GPI_I2C>,
> + <&gpi_dma0 1 1 QCOM_GPI_I2C>;
> + dma-names = "tx", "rx";
> + #address-cells = <1>;
> + #size-cells = <0>;
> + status = "disabled";
> + };
> +
> + i2c2: i2c@4a88000 {
> + compatible = "qcom,geni-i2c";
> + reg = <0x04a88000 0x4000>;
> + clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>;
> + clock-names = "se";
> + interrupts = <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>;
> + pinctrl-0 = <&qup_i2c2_default>;
> + pinctrl-1 = <&qup_i2c2_sleep>;
> + pinctrl-names = "default", "sleep";
> + dmas = <&gpi_dma0 0 2 QCOM_GPI_I2C>,
> + <&gpi_dma0 1 2 QCOM_GPI_I2C>;
> + dma-names = "tx", "rx";
> + #address-cells = <1>;
> + #size-cells = <0>;
> + status = "disabled";
> + };
> +
> + spi2: spi@4a88000 {
> + compatible = "qcom,geni-spi";
> + reg = <0x04a88000 0x4000>;
> + clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>;
> + clock-names = "se";
> + interrupts = <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>;
> + pinctrl-0 = <&qup_spi2_default>;
> + pinctrl-1 = <&qup_spi2_sleep>;
> + pinctrl-names = "default", "sleep";
> + dmas = <&gpi_dma0 0 2 QCOM_GPI_SPI>,
> + <&gpi_dma0 1 2 QCOM_GPI_SPI>;
> + dma-names = "tx", "rx";
> + #address-cells = <1>;
> + #size-cells = <0>;
> + status = "disabled";
> + };
> +
> + i2c3: i2c@4a8c000 {
> + compatible = "qcom,geni-i2c";
> + reg = <0x04a8c000 0x4000>;
> + clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>;
> + clock-names = "se";
> + interrupts = <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>;
> + pinctrl-0 = <&qup_i2c3_default>;
> + pinctrl-1 = <&qup_i2c3_sleep>;
> + pinctrl-names = "default", "sleep";
> + dmas = <&gpi_dma0 0 3 QCOM_GPI_I2C>,
> + <&gpi_dma0 1 3 QCOM_GPI_I2C>;
> + dma-names = "tx", "rx";
> + #address-cells = <1>;
> + #size-cells = <0>;
> + status = "disabled";
> + };
> +
> + i2c4: i2c@4a90000 {
> + compatible = "qcom,geni-i2c";
> + reg = <0x04a90000 0x4000>;
> + clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>;
> + clock-names = "se";
> + interrupts = <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>;
> + pinctrl-0 = <&qup_i2c4_default>;
> + pinctrl-1 = <&qup_i2c4_sleep>;
> + pinctrl-names = "default", "sleep";
> + dmas = <&gpi_dma0 0 4 QCOM_GPI_I2C>,
> + <&gpi_dma0 1 4 QCOM_GPI_I2C>;
> + dma-names = "tx", "rx";
> + #address-cells = <1>;
> + #size-cells = <0>;
> + status = "disabled";
> + };
> + };
> +
> gpi_dma1: dma-controller@4c00000 {
> compatible = "qcom,sm6125-gpi-dma", "qcom,sdm845-gpi-dma";
> reg = <0x04c00000 0x60000>;
> @@ -771,6 +903,172 @@ gpi_dma1: dma-controller@4c00000 {
> status = "disabled";
> };
>
> + qupv3_id_1: geniqup@4cc0000 {
> + compatible = "qcom,geni-se-qup";
> + reg = <0x04cc0000 0x2000>;
> + clocks = <&gcc GCC_QUPV3_WRAP_1_M_AHB_CLK>,
> + <&gcc GCC_QUPV3_WRAP_1_S_AHB_CLK>;
> + clock-names = "m-ahb", "s-ahb";
> + iommus = <&apps_smmu 0x143 0x0>;
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges;
> + status = "disabled";
> +
> + i2c5: i2c@4c80000 {
> + compatible = "qcom,geni-i2c";
> + reg = <0x04c80000 0x4000>;
> + clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>;
> + clock-names = "se";
> + interrupts = <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>;
> + pinctrl-0 = <&qup_i2c5_default>;
> + pinctrl-1 = <&qup_i2c5_sleep>;
> + pinctrl-names = "default", "sleep";
> + dmas = <&gpi_dma1 0 0 QCOM_GPI_I2C>,
> + <&gpi_dma1 1 0 QCOM_GPI_I2C>;
> + dma-names = "tx", "rx";
> + #address-cells = <1>;
> + #size-cells = <0>;
> + status = "disabled";
> + };
> +
> + spi5: spi@4c80000 {
> + compatible = "qcom,geni-spi";
> + reg = <0x04c80000 0x4000>;
> + clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>;
> + clock-names = "se";
> + interrupts = <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>;
> + pinctrl-0 = <&qup_spi5_default>;
> + pinctrl-1 = <&qup_spi5_sleep>;
> + pinctrl-names = "default", "sleep";
> + dmas = <&gpi_dma1 0 0 QCOM_GPI_SPI>,
> + <&gpi_dma1 1 0 QCOM_GPI_SPI>;
> + dma-names = "tx", "rx";
> + #address-cells = <1>;
> + #size-cells = <0>;
> + status = "disabled";
> + };
> +
> + i2c6: i2c@4c84000 {
> + compatible = "qcom,geni-i2c";
> + reg = <0x04c84000 0x4000>;
> + clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>;
> + clock-names = "se";
> + interrupts = <GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH>;
> + pinctrl-0 = <&qup_i2c6_default>;
> + pinctrl-1 = <&qup_i2c6_sleep>;
> + pinctrl-names = "default", "sleep";
> + dmas = <&gpi_dma1 0 1 QCOM_GPI_I2C>,
> + <&gpi_dma1 1 1 QCOM_GPI_I2C>;
> + dma-names = "tx", "rx";
> + #address-cells = <1>;
> + #size-cells = <0>;
> + status = "disabled";
> + };
> +
> + spi6: spi@4c84000 {
> + compatible = "qcom,geni-spi";
> + reg = <0x04c84000 0x4000>;
> + clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>;
> + clock-names = "se";
> + interrupts = <GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH>;
> + pinctrl-0 = <&qup_spi6_default>;
> + pinctrl-1 = <&qup_spi6_sleep>;
> + pinctrl-names = "default", "sleep";
> + dmas = <&gpi_dma1 0 1 QCOM_GPI_SPI>,
> + <&gpi_dma1 1 1 QCOM_GPI_SPI>;
> + dma-names = "tx", "rx";
> + #address-cells = <1>;
> + #size-cells = <0>;
> + status = "disabled";
> + };
> +
> + i2c7: i2c@4c88000 {
> + compatible = "qcom,geni-i2c";
> + reg = <0x04c88000 0x4000>;
> + clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>;
> + clock-names = "se";
> + interrupts = <GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH>;
> + pinctrl-0 = <&qup_i2c7_default>;
> + pinctrl-1 = <&qup_i2c7_sleep>;
> + pinctrl-names = "default", "sleep";
> + dmas = <&gpi_dma1 0 2 QCOM_GPI_I2C>,
> + <&gpi_dma1 1 2 QCOM_GPI_I2C>;
> + dma-names = "tx", "rx";
> + #address-cells = <1>;
> + #size-cells = <0>;
> + status = "disabled";
> + };
> +
> + i2c8: i2c@4c8c000 {
> + compatible = "qcom,geni-i2c";
> + reg = <0x04c8c000 0x4000>;
> + clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>;
> + clock-names = "se";
> + interrupts = <GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH>;
> + pinctrl-0 = <&qup_i2c8_default>;
> + pinctrl-1 = <&qup_i2c8_sleep>;
> + pinctrl-names = "default", "sleep";
> + dmas = <&gpi_dma1 0 3 QCOM_GPI_I2C>,
> + <&gpi_dma1 1 3 QCOM_GPI_I2C>;
> + dma-names = "tx", "rx";
> + #address-cells = <1>;
> + #size-cells = <0>;
> + status = "disabled";
> + };
> +
> + spi8: spi@4c8c000 {
> + compatible = "qcom,geni-spi";
> + reg = <0x04c8c000 0x4000>;
> + clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>;
> + clock-names = "se";
> + interrupts = <GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH>;
> + pinctrl-0 = <&qup_spi8_default>;
> + pinctrl-1 = <&qup_spi8_sleep>;
> + pinctrl-names = "default", "sleep";
> + dmas = <&gpi_dma1 0 3 QCOM_GPI_SPI>,
> + <&gpi_dma1 1 3 QCOM_GPI_SPI>;
> + dma-names = "tx", "rx";
> + #address-cells = <1>;
> + #size-cells = <0>;
> + status = "disabled";
> + };
> +
> + i2c9: i2c@4c90000 {
> + compatible = "qcom,geni-i2c";
> + reg = <0x04c90000 0x4000>;
> + clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>;
> + clock-names = "se";
> + interrupts = <GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH>;
> + pinctrl-0 = <&qup_i2c9_default>;
> + pinctrl-1 = <&qup_i2c9_sleep>;
> + pinctrl-names = "default", "sleep";
> + dmas = <&gpi_dma1 0 4 QCOM_GPI_I2C>,
> + <&gpi_dma1 1 4 QCOM_GPI_I2C>;
> + dma-names = "tx", "rx";
> + #address-cells = <1>;
> + #size-cells = <0>;
> + status = "disabled";
> + };
> +
> + spi9: spi@4c90000 {
> + compatible = "qcom,geni-spi";
> + reg = <0x04c90000 0x4000>;
> + clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>;
> + clock-names = "se";
> + interrupts = <GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH>;
> + pinctrl-0 = <&qup_spi9_default>;
> + pinctrl-1 = <&qup_spi9_sleep>;
> + pinctrl-names = "default", "sleep";
> + dmas = <&gpi_dma1 0 4 QCOM_GPI_SPI>,
> + <&gpi_dma1 1 4 QCOM_GPI_SPI>;
> + dma-names = "tx", "rx";
> + #address-cells = <1>;
> + #size-cells = <0>;
> + status = "disabled";
> + };
> + };
> +
> usb3: usb@4ef8800 {
> compatible = "qcom,sm6125-dwc3", "qcom,dwc3";
> reg = <0x04ef8800 0x400>;
On 2022-12-17 16:19:21, Konrad Dybcio wrote:
>
>
> On 17.12.2022 00:34, Marijn Suijten wrote:
> > Add Qualcomm Universal Peripheral nodes with SPI and I2C Serial Engines.
> > QUP 0 only has two SPIs at index 0 and 2, QUP 1 has four SPIs with a gap
> > in the middle (ranging from 5-9 with SPI 7 missing). Both QUPs have 5
> > I2C Serial Engines.
> >
> > Signed-off-by: Martin Botka <martin.botka@somainline.org>
> > [Marijn: Add iommus, reword patch description, reorder all properties,
> > sort based on address, use QCOM_GPI_ constants, drop dma cells from 5
> > to 3]
> > Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
> > ---
> Modulo the comment about 0x0/0 in iommus= (let's hear what
> others think):
The vast majority of qcom DTS - and the majority of iommus=<> in sm6125
- uses 0x0, so we'll stick with that. I'll fix and resend an earlier
patch series that wrongly uses decimal 0.
> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
>
> Konrad
> > arch/arm64/boot/dts/qcom/sm6125.dtsi | 298 +++++++++++++++++++++++++++
> > 1 file changed, 298 insertions(+)
> >
> > diff --git a/arch/arm64/boot/dts/qcom/sm6125.dtsi b/arch/arm64/boot/dts/qcom/sm6125.dtsi
> > index 5fc304b2da63..36ba74b5ad89 100644
> > --- a/arch/arm64/boot/dts/qcom/sm6125.dtsi
> > +++ b/arch/arm64/boot/dts/qcom/sm6125.dtsi
> > @@ -753,6 +753,138 @@ gpi_dma0: dma-controller@4a00000 {
> > status = "disabled";
> > };
> >
> > + qupv3_id_0: geniqup@4ac0000 {
> > + compatible = "qcom,geni-se-qup";
> > + reg = <0x04ac0000 0x2000>;
> > + clocks = <&gcc GCC_QUPV3_WRAP_0_M_AHB_CLK>,
> > + <&gcc GCC_QUPV3_WRAP_0_S_AHB_CLK>;
> > + clock-names = "m-ahb", "s-ahb";
> > + iommus = <&apps_smmu 0x123 0x0>;
> > + #address-cells = <1>;
> > + #size-cells = <1>;
> > + ranges;
> > + status = "disabled";
> > +
> > + i2c0: i2c@4a80000 {
> > + compatible = "qcom,geni-i2c";
> > + reg = <0x04a80000 0x4000>;
> > + clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>;
> > + clock-names = "se";
> > + interrupts = <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>;
> > + pinctrl-0 = <&qup_i2c0_default>;
> > + pinctrl-1 = <&qup_i2c0_sleep>;
> > + pinctrl-names = "default", "sleep";
> > + dmas = <&gpi_dma0 0 0 QCOM_GPI_I2C>,
> > + <&gpi_dma0 1 0 QCOM_GPI_I2C>;
> > + dma-names = "tx", "rx";
> > + #address-cells = <1>;
> > + #size-cells = <0>;
> > + status = "disabled";
> > + };
> > +
> > + spi0: spi@4a80000 {
> > + compatible = "qcom,geni-spi";
> > + reg = <0x04a80000 0x4000>;
> > + clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>;
> > + clock-names = "se";
> > + interrupts = <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>;
> > + pinctrl-0 = <&qup_spi0_default>;
> > + pinctrl-1 = <&qup_spi0_sleep>;
> > + pinctrl-names = "default", "sleep";
> > + dmas = <&gpi_dma0 0 0 QCOM_GPI_SPI>,
> > + <&gpi_dma0 1 0 QCOM_GPI_SPI>;
> > + dma-names = "tx", "rx";
> > + #address-cells = <1>;
> > + #size-cells = <0>;
> > + status = "disabled";
> > + };
> > +
> > + i2c1: i2c@4a84000 {
> > + compatible = "qcom,geni-i2c";
> > + reg = <0x04a84000 0x4000>;
> > + clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>;
> > + clock-names = "se";
> > + interrupts = <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>;
> > + pinctrl-0 = <&qup_i2c1_default>;
> > + pinctrl-1 = <&qup_i2c1_sleep>;
> > + pinctrl-names = "default", "sleep";
> > + dmas = <&gpi_dma0 0 1 QCOM_GPI_I2C>,
> > + <&gpi_dma0 1 1 QCOM_GPI_I2C>;
> > + dma-names = "tx", "rx";
> > + #address-cells = <1>;
> > + #size-cells = <0>;
> > + status = "disabled";
> > + };
> > +
> > + i2c2: i2c@4a88000 {
> > + compatible = "qcom,geni-i2c";
> > + reg = <0x04a88000 0x4000>;
> > + clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>;
> > + clock-names = "se";
> > + interrupts = <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>;
> > + pinctrl-0 = <&qup_i2c2_default>;
> > + pinctrl-1 = <&qup_i2c2_sleep>;
> > + pinctrl-names = "default", "sleep";
> > + dmas = <&gpi_dma0 0 2 QCOM_GPI_I2C>,
> > + <&gpi_dma0 1 2 QCOM_GPI_I2C>;
> > + dma-names = "tx", "rx";
> > + #address-cells = <1>;
> > + #size-cells = <0>;
> > + status = "disabled";
> > + };
> > +
> > + spi2: spi@4a88000 {
> > + compatible = "qcom,geni-spi";
> > + reg = <0x04a88000 0x4000>;
> > + clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>;
> > + clock-names = "se";
> > + interrupts = <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>;
> > + pinctrl-0 = <&qup_spi2_default>;
> > + pinctrl-1 = <&qup_spi2_sleep>;
> > + pinctrl-names = "default", "sleep";
> > + dmas = <&gpi_dma0 0 2 QCOM_GPI_SPI>,
> > + <&gpi_dma0 1 2 QCOM_GPI_SPI>;
> > + dma-names = "tx", "rx";
> > + #address-cells = <1>;
> > + #size-cells = <0>;
> > + status = "disabled";
> > + };
> > +
> > + i2c3: i2c@4a8c000 {
> > + compatible = "qcom,geni-i2c";
> > + reg = <0x04a8c000 0x4000>;
> > + clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>;
> > + clock-names = "se";
> > + interrupts = <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>;
> > + pinctrl-0 = <&qup_i2c3_default>;
> > + pinctrl-1 = <&qup_i2c3_sleep>;
> > + pinctrl-names = "default", "sleep";
> > + dmas = <&gpi_dma0 0 3 QCOM_GPI_I2C>,
> > + <&gpi_dma0 1 3 QCOM_GPI_I2C>;
> > + dma-names = "tx", "rx";
> > + #address-cells = <1>;
> > + #size-cells = <0>;
> > + status = "disabled";
> > + };
> > +
> > + i2c4: i2c@4a90000 {
> > + compatible = "qcom,geni-i2c";
> > + reg = <0x04a90000 0x4000>;
> > + clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>;
> > + clock-names = "se";
> > + interrupts = <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>;
> > + pinctrl-0 = <&qup_i2c4_default>;
> > + pinctrl-1 = <&qup_i2c4_sleep>;
> > + pinctrl-names = "default", "sleep";
> > + dmas = <&gpi_dma0 0 4 QCOM_GPI_I2C>,
> > + <&gpi_dma0 1 4 QCOM_GPI_I2C>;
> > + dma-names = "tx", "rx";
> > + #address-cells = <1>;
> > + #size-cells = <0>;
> > + status = "disabled";
> > + };
> > + };
> > +
> > gpi_dma1: dma-controller@4c00000 {
> > compatible = "qcom,sm6125-gpi-dma", "qcom,sdm845-gpi-dma";
> > reg = <0x04c00000 0x60000>;
> > @@ -771,6 +903,172 @@ gpi_dma1: dma-controller@4c00000 {
> > status = "disabled";
> > };
> >
> > + qupv3_id_1: geniqup@4cc0000 {
> > + compatible = "qcom,geni-se-qup";
> > + reg = <0x04cc0000 0x2000>;
> > + clocks = <&gcc GCC_QUPV3_WRAP_1_M_AHB_CLK>,
> > + <&gcc GCC_QUPV3_WRAP_1_S_AHB_CLK>;
> > + clock-names = "m-ahb", "s-ahb";
> > + iommus = <&apps_smmu 0x143 0x0>;
> > + #address-cells = <1>;
> > + #size-cells = <1>;
> > + ranges;
> > + status = "disabled";
> > +
> > + i2c5: i2c@4c80000 {
> > + compatible = "qcom,geni-i2c";
> > + reg = <0x04c80000 0x4000>;
> > + clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>;
> > + clock-names = "se";
> > + interrupts = <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>;
> > + pinctrl-0 = <&qup_i2c5_default>;
> > + pinctrl-1 = <&qup_i2c5_sleep>;
> > + pinctrl-names = "default", "sleep";
> > + dmas = <&gpi_dma1 0 0 QCOM_GPI_I2C>,
> > + <&gpi_dma1 1 0 QCOM_GPI_I2C>;
> > + dma-names = "tx", "rx";
> > + #address-cells = <1>;
> > + #size-cells = <0>;
> > + status = "disabled";
> > + };
> > +
> > + spi5: spi@4c80000 {
> > + compatible = "qcom,geni-spi";
> > + reg = <0x04c80000 0x4000>;
> > + clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>;
> > + clock-names = "se";
> > + interrupts = <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>;
> > + pinctrl-0 = <&qup_spi5_default>;
> > + pinctrl-1 = <&qup_spi5_sleep>;
> > + pinctrl-names = "default", "sleep";
> > + dmas = <&gpi_dma1 0 0 QCOM_GPI_SPI>,
> > + <&gpi_dma1 1 0 QCOM_GPI_SPI>;
> > + dma-names = "tx", "rx";
> > + #address-cells = <1>;
> > + #size-cells = <0>;
> > + status = "disabled";
> > + };
> > +
> > + i2c6: i2c@4c84000 {
> > + compatible = "qcom,geni-i2c";
> > + reg = <0x04c84000 0x4000>;
> > + clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>;
> > + clock-names = "se";
> > + interrupts = <GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH>;
> > + pinctrl-0 = <&qup_i2c6_default>;
> > + pinctrl-1 = <&qup_i2c6_sleep>;
> > + pinctrl-names = "default", "sleep";
> > + dmas = <&gpi_dma1 0 1 QCOM_GPI_I2C>,
> > + <&gpi_dma1 1 1 QCOM_GPI_I2C>;
> > + dma-names = "tx", "rx";
> > + #address-cells = <1>;
> > + #size-cells = <0>;
> > + status = "disabled";
> > + };
> > +
> > + spi6: spi@4c84000 {
> > + compatible = "qcom,geni-spi";
> > + reg = <0x04c84000 0x4000>;
> > + clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>;
> > + clock-names = "se";
> > + interrupts = <GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH>;
> > + pinctrl-0 = <&qup_spi6_default>;
> > + pinctrl-1 = <&qup_spi6_sleep>;
> > + pinctrl-names = "default", "sleep";
> > + dmas = <&gpi_dma1 0 1 QCOM_GPI_SPI>,
> > + <&gpi_dma1 1 1 QCOM_GPI_SPI>;
> > + dma-names = "tx", "rx";
> > + #address-cells = <1>;
> > + #size-cells = <0>;
> > + status = "disabled";
> > + };
> > +
> > + i2c7: i2c@4c88000 {
> > + compatible = "qcom,geni-i2c";
> > + reg = <0x04c88000 0x4000>;
> > + clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>;
> > + clock-names = "se";
> > + interrupts = <GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH>;
> > + pinctrl-0 = <&qup_i2c7_default>;
> > + pinctrl-1 = <&qup_i2c7_sleep>;
> > + pinctrl-names = "default", "sleep";
> > + dmas = <&gpi_dma1 0 2 QCOM_GPI_I2C>,
> > + <&gpi_dma1 1 2 QCOM_GPI_I2C>;
> > + dma-names = "tx", "rx";
> > + #address-cells = <1>;
> > + #size-cells = <0>;
> > + status = "disabled";
> > + };
> > +
> > + i2c8: i2c@4c8c000 {
> > + compatible = "qcom,geni-i2c";
> > + reg = <0x04c8c000 0x4000>;
> > + clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>;
> > + clock-names = "se";
> > + interrupts = <GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH>;
> > + pinctrl-0 = <&qup_i2c8_default>;
> > + pinctrl-1 = <&qup_i2c8_sleep>;
> > + pinctrl-names = "default", "sleep";
> > + dmas = <&gpi_dma1 0 3 QCOM_GPI_I2C>,
> > + <&gpi_dma1 1 3 QCOM_GPI_I2C>;
> > + dma-names = "tx", "rx";
> > + #address-cells = <1>;
> > + #size-cells = <0>;
> > + status = "disabled";
> > + };
> > +
> > + spi8: spi@4c8c000 {
> > + compatible = "qcom,geni-spi";
> > + reg = <0x04c8c000 0x4000>;
> > + clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>;
> > + clock-names = "se";
> > + interrupts = <GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH>;
> > + pinctrl-0 = <&qup_spi8_default>;
> > + pinctrl-1 = <&qup_spi8_sleep>;
> > + pinctrl-names = "default", "sleep";
> > + dmas = <&gpi_dma1 0 3 QCOM_GPI_SPI>,
> > + <&gpi_dma1 1 3 QCOM_GPI_SPI>;
> > + dma-names = "tx", "rx";
> > + #address-cells = <1>;
> > + #size-cells = <0>;
> > + status = "disabled";
> > + };
> > +
> > + i2c9: i2c@4c90000 {
> > + compatible = "qcom,geni-i2c";
> > + reg = <0x04c90000 0x4000>;
> > + clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>;
> > + clock-names = "se";
> > + interrupts = <GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH>;
> > + pinctrl-0 = <&qup_i2c9_default>;
> > + pinctrl-1 = <&qup_i2c9_sleep>;
> > + pinctrl-names = "default", "sleep";
> > + dmas = <&gpi_dma1 0 4 QCOM_GPI_I2C>,
> > + <&gpi_dma1 1 4 QCOM_GPI_I2C>;
> > + dma-names = "tx", "rx";
> > + #address-cells = <1>;
> > + #size-cells = <0>;
> > + status = "disabled";
> > + };
> > +
> > + spi9: spi@4c90000 {
> > + compatible = "qcom,geni-spi";
> > + reg = <0x04c90000 0x4000>;
> > + clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>;
> > + clock-names = "se";
> > + interrupts = <GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH>;
> > + pinctrl-0 = <&qup_spi9_default>;
> > + pinctrl-1 = <&qup_spi9_sleep>;
> > + pinctrl-names = "default", "sleep";
> > + dmas = <&gpi_dma1 0 4 QCOM_GPI_SPI>,
> > + <&gpi_dma1 1 4 QCOM_GPI_SPI>;
> > + dma-names = "tx", "rx";
> > + #address-cells = <1>;
> > + #size-cells = <0>;
> > + status = "disabled";
> > + };
> > + };
> > +
> > usb3: usb@4ef8800 {
> > compatible = "qcom,sm6125-dwc3", "qcom,dwc3";
> > reg = <0x04ef8800 0x400>;
© 2016 - 2025 Red Hat, Inc.