arch/arm64/boot/dts/ti/k3-am62-main.dtsi | 90 ++++++++++++++++++------ arch/arm64/boot/dts/ti/k3-am625-sk.dts | 22 ++++++ 2 files changed, 90 insertions(+), 22 deletions(-)
This series picks up a few patches from the TI BSP tree that unfortunately didn't make it upstream thusfar. The first patch improve SD card compatibility (allowing U1 class cards to be used), the remaining ones add USB support. The type-c connector isn't entirely modelled with these changes as it goes through a TPS6598 PD controller. Unfortunately the dtb bindings for that currently require an irq line, which is not connected on E1 and E2 version boards. The patchese to support this setup unfortunately didn't land yet[0].. As such the last patch ignored the PD controller and simply configures usb0 as periphal only rather then mode switch capable, which at least gives some basic usability of that USB port. 0: https://lore.kernel.org/lkml/f714ee55-ef47-317d-81b9-57020dda064b@ti.com/T/ Aswath Govindraju (2): arm64: dts: ti: k3-am62-main: Add support for USB arm64: dts: ti: k3-am625-sk: Add support for USB Nitin Yadav (1): arm64: dts: ti: k3-am62-main: Update OTAP and ITAP delay select arch/arm64/boot/dts/ti/k3-am62-main.dtsi | 90 ++++++++++++++++++------ arch/arm64/boot/dts/ti/k3-am625-sk.dts | 22 ++++++ 2 files changed, 90 insertions(+), 22 deletions(-) -- 2.39.0
Hi, On 16/12/22 8:06 pm, Sjoerd Simons wrote: > > This series picks up a few patches from the TI BSP tree that > unfortunately didn't make it upstream thusfar. > > The first patch improve SD card compatibility (allowing U1 class cards > to be used), the remaining ones add USB support. > > The type-c connector isn't entirely modelled with these changes as > it goes through a TPS6598 PD controller. Unfortunately the dtb bindings > for that currently require an irq line, which is not connected on E1 and > E2 version boards. The patchese to support this setup unfortunately didn't land > yet[0].. As such the last patch ignored the PD controller and simply > configures usb0 as periphal only rather then mode switch capable, which > at least gives some basic usability of that USB port. > > 0: https://lore.kernel.org/lkml/f714ee55-ef47-317d-81b9-57020dda064b@ti.com/T/ > > Really appreciate porting and posting these patches to mainline! Wondering what tree are these patches based on? I cannot apply cleanly on linux-next. > Aswath Govindraju (2): > arm64: dts: ti: k3-am62-main: Add support for USB > arm64: dts: ti: k3-am625-sk: Add support for USB > > Nitin Yadav (1): > arm64: dts: ti: k3-am62-main: Update OTAP and ITAP delay select > > arch/arm64/boot/dts/ti/k3-am62-main.dtsi | 90 ++++++++++++++++++------ > arch/arm64/boot/dts/ti/k3-am625-sk.dts | 22 ++++++ > 2 files changed, 90 insertions(+), 22 deletions(-) > Regards Vignesh
Hey Vignesh, On Tue, 2022-12-20 at 17:02 +0530, Vignesh Raghavendra wrote: > Hi, > > On 16/12/22 8:06 pm, Sjoerd Simons wrote: > > > > This series picks up a few patches from the TI BSP tree that > > unfortunately didn't make it upstream thusfar. ... > > 0: > > https://lore.kernel.org/lkml/f714ee55-ef47-317d-81b9-57020dda064b@ti.com/T/ > > > > > Really appreciate porting and posting these patches to mainline! > Wondering what tree are these patches based on? > I cannot apply cleanly on linux-next. These are against Linux 6.1 ; I'll happy rebase agains next for the next round or is there a specific tree you prefer to base against? Regards, -- Sjoerd Simons Collabora Ltd.
Hi Sjoerd On 12/20/2022 6:11 PM, Sjoerd Simons wrote: > Hey Vignesh, > > On Tue, 2022-12-20 at 17:02 +0530, Vignesh Raghavendra wrote: >> Hi, >> >> On 16/12/22 8:06 pm, Sjoerd Simons wrote: >>> >>> This series picks up a few patches from the TI BSP tree that >>> unfortunately didn't make it upstream thusfar. > ... >>> 0: >>> https://lore.kernel.org/lkml/f714ee55-ef47-317d-81b9-57020dda064b@ti.com/T/ >>> >>> >> Really appreciate porting and posting these patches to mainline! >> Wondering what tree are these patches based on? >> I cannot apply cleanly on linux-next. > > These are against Linux 6.1 ; I'll happy rebase agains next for the > next round or is there a specific tree you prefer to base against? > TI K3 patch queue is at: https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux.git ti-next This is part of linux-next. So, yes, I would like all patches to be based on -next or above tree. I see you have already done that in v2.. Thanks! Regards Vignesh
On Fri, 2022-12-16 at 15:36 +0100, Sjoerd Simons wrote: > > This series picks up a few patches from the TI BSP tree that > unfortunately didn't make it upstream thusfar. > > The first patch improve SD card compatibility (allowing U1 class > cards > to be used), the remaining ones add USB support. > > The type-c connector isn't entirely modelled with these changes as > it goes through a TPS6598 PD controller. Unfortunately the dtb > bindings > for that currently require an irq line, which is not connected on E1 > and > E2 version boards. The patchese to support this setup unfortunately > didn't land > yet[0].. As such the last patch ignored the PD controller and simply > configures usb0 as periphal only rather then mode switch capable, > which > at least gives some basic usability of that USB port. > > 0: > https://lore.kernel.org/lkml/f714ee55-ef47-317d-81b9-57020dda064b@ti.com/T/ > > Series tested with known problematic SD Card and checking for detection of inserted USB device. Tested-by: Martyn Welch <martyn.welch@collabora.com> > Aswath Govindraju (2): > arm64: dts: ti: k3-am62-main: Add support for USB > arm64: dts: ti: k3-am625-sk: Add support for USB > > Nitin Yadav (1): > arm64: dts: ti: k3-am62-main: Update OTAP and ITAP delay select > > arch/arm64/boot/dts/ti/k3-am62-main.dtsi | 90 ++++++++++++++++++---- > -- > arch/arm64/boot/dts/ti/k3-am625-sk.dts | 22 ++++++ > 2 files changed, 90 insertions(+), 22 deletions(-) >
© 2016 - 2025 Red Hat, Inc.