From: Hugo Villeneuve <hvilleneuve@dimonoff.com>
This will simplify the implementation of new variants into this driver.
Some variants (PCF2131) have a 100th seconds register. This register is
currently not supported in this driver.
Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com>
---
drivers/rtc/rtc-pcf2127.c | 68 ++++++++++++++++++++++-----------------
1 file changed, 39 insertions(+), 29 deletions(-)
diff --git a/drivers/rtc/rtc-pcf2127.c b/drivers/rtc/rtc-pcf2127.c
index b9a5d47a439f..fb0caacaabee 100644
--- a/drivers/rtc/rtc-pcf2127.c
+++ b/drivers/rtc/rtc-pcf2127.c
@@ -44,14 +44,17 @@
#define PCF2127_BIT_CTRL3_BF BIT(3)
#define PCF2127_BIT_CTRL3_BTSE BIT(4)
/* Time and date registers */
-#define PCF2127_REG_SC 0x03
+#define PCF2127_REG_TIME_DATE_BASE 0x03
+/* Time and date registers offsets (starting from base register) */
+#define PCF2127_OFFSET_TD_SC 0
+#define PCF2127_OFFSET_TD_MN 1
+#define PCF2127_OFFSET_TD_HR 2
+#define PCF2127_OFFSET_TD_DM 3
+#define PCF2127_OFFSET_TD_DW 4
+#define PCF2127_OFFSET_TD_MO 5
+#define PCF2127_OFFSET_TD_YR 6
+/* Time and date registers bits */
#define PCF2127_BIT_SC_OSF BIT(7)
-#define PCF2127_REG_MN 0x04
-#define PCF2127_REG_HR 0x05
-#define PCF2127_REG_DM 0x06
-#define PCF2127_REG_DW 0x07
-#define PCF2127_REG_MO 0x08
-#define PCF2127_REG_YR 0x09
/* Alarm registers */
#define PCF2127_REG_ALARM_SC 0x0A
#define PCF2127_REG_ALARM_MN 0x0B
@@ -106,6 +109,7 @@ struct pcf21xx_config {
int max_register;
unsigned int has_nvmem:1;
unsigned int has_bit_wd_ctl_cd0:1;
+ u8 regs_td_base; /* Time/data base registers. */
};
struct pcf2127 {
@@ -125,27 +129,31 @@ struct pcf2127 {
static int pcf2127_rtc_read_time(struct device *dev, struct rtc_time *tm)
{
struct pcf2127 *pcf2127 = dev_get_drvdata(dev);
- unsigned char buf[10];
+ unsigned char buf[7];
+ unsigned int ctrl3;
int ret;
/*
* Avoid reading CTRL2 register as it causes WD_VAL register
* value to reset to 0 which means watchdog is stopped.
*/
- ret = regmap_bulk_read(pcf2127->regmap, PCF2127_REG_CTRL3,
- (buf + PCF2127_REG_CTRL3),
- ARRAY_SIZE(buf) - PCF2127_REG_CTRL3);
- if (ret) {
- dev_err(dev, "%s: read error\n", __func__);
+ ret = regmap_read(pcf2127->regmap, PCF2127_REG_CTRL3, &ctrl3);
+ if (ret)
return ret;
- }
- if (buf[PCF2127_REG_CTRL3] & PCF2127_BIT_CTRL3_BLF)
+ if (ctrl3 & PCF2127_BIT_CTRL3_BLF)
dev_info(dev,
"low voltage detected, check/replace RTC battery.\n");
+ ret = regmap_bulk_read(pcf2127->regmap, pcf2127->cfg->regs_td_base,
+ buf, sizeof(buf));
+ if (ret) {
+ dev_err(dev, "%s: read error\n", __func__);
+ return ret;
+ }
+
/* Clock integrity is not guaranteed when OSF flag is set. */
- if (buf[PCF2127_REG_SC] & PCF2127_BIT_SC_OSF) {
+ if (buf[PCF2127_OFFSET_TD_SC] & PCF2127_BIT_SC_OSF) {
/*
* no need clear the flag here,
* it will be cleared once the new date is saved
@@ -158,18 +166,18 @@ static int pcf2127_rtc_read_time(struct device *dev, struct rtc_time *tm)
dev_dbg(dev,
"%s: raw data is cr3=%02x, sec=%02x, min=%02x, hr=%02x, "
"mday=%02x, wday=%02x, mon=%02x, year=%02x\n",
- __func__, buf[PCF2127_REG_CTRL3], buf[PCF2127_REG_SC],
- buf[PCF2127_REG_MN], buf[PCF2127_REG_HR],
- buf[PCF2127_REG_DM], buf[PCF2127_REG_DW],
- buf[PCF2127_REG_MO], buf[PCF2127_REG_YR]);
-
- tm->tm_sec = bcd2bin(buf[PCF2127_REG_SC] & 0x7F);
- tm->tm_min = bcd2bin(buf[PCF2127_REG_MN] & 0x7F);
- tm->tm_hour = bcd2bin(buf[PCF2127_REG_HR] & 0x3F); /* rtc hr 0-23 */
- tm->tm_mday = bcd2bin(buf[PCF2127_REG_DM] & 0x3F);
- tm->tm_wday = buf[PCF2127_REG_DW] & 0x07;
- tm->tm_mon = bcd2bin(buf[PCF2127_REG_MO] & 0x1F) - 1; /* rtc mn 1-12 */
- tm->tm_year = bcd2bin(buf[PCF2127_REG_YR]);
+ __func__, ctrl3, buf[PCF2127_OFFSET_TD_SC],
+ buf[PCF2127_OFFSET_TD_MN], buf[PCF2127_OFFSET_TD_HR],
+ buf[PCF2127_OFFSET_TD_DM], buf[PCF2127_OFFSET_TD_DW],
+ buf[PCF2127_OFFSET_TD_MO], buf[PCF2127_OFFSET_TD_YR]);
+
+ tm->tm_sec = bcd2bin(buf[PCF2127_OFFSET_TD_SC] & 0x7F);
+ tm->tm_min = bcd2bin(buf[PCF2127_OFFSET_TD_MN] & 0x7F);
+ tm->tm_hour = bcd2bin(buf[PCF2127_OFFSET_TD_HR] & 0x3F); /* rtc hr 0-23 */
+ tm->tm_mday = bcd2bin(buf[PCF2127_OFFSET_TD_DM] & 0x3F);
+ tm->tm_wday = buf[PCF2127_OFFSET_TD_DW] & 0x07;
+ tm->tm_mon = bcd2bin(buf[PCF2127_OFFSET_TD_MO] & 0x1F) - 1; /* rtc mn 1-12 */
+ tm->tm_year = bcd2bin(buf[PCF2127_OFFSET_TD_YR]);
tm->tm_year += 100;
dev_dbg(dev, "%s: tm is secs=%d, mins=%d, hours=%d, "
@@ -207,7 +215,7 @@ static int pcf2127_rtc_set_time(struct device *dev, struct rtc_time *tm)
buf[i++] = bin2bcd(tm->tm_year - 100);
/* write register's data */
- err = regmap_bulk_write(pcf2127->regmap, PCF2127_REG_SC, buf, i);
+ err = regmap_bulk_write(pcf2127->regmap, pcf2127->cfg->regs_td_base, buf, i);
if (err) {
dev_err(dev,
"%s: err=%d", __func__, err);
@@ -650,11 +658,13 @@ static struct pcf21xx_config pcf21xx_cfg[] = {
.max_register = 0x1d,
.has_nvmem = 1,
.has_bit_wd_ctl_cd0 = 1,
+ .regs_td_base = PCF2127_REG_TIME_DATE_BASE,
},
[PCF2129] = {
.max_register = 0x19,
.has_nvmem = 0,
.has_bit_wd_ctl_cd0 = 0,
+ .regs_td_base = PCF2127_REG_TIME_DATE_BASE,
},
};
--
2.30.2On 15/12/2022 10:02:03-0500, Hugo Villeneuve wrote:
> From: Hugo Villeneuve <hvilleneuve@dimonoff.com>
>
> This will simplify the implementation of new variants into this driver.
>
> Some variants (PCF2131) have a 100th seconds register. This register is
> currently not supported in this driver.
>
> Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com>
> ---
> drivers/rtc/rtc-pcf2127.c | 68 ++++++++++++++++++++++-----------------
> 1 file changed, 39 insertions(+), 29 deletions(-)
>
> diff --git a/drivers/rtc/rtc-pcf2127.c b/drivers/rtc/rtc-pcf2127.c
> index b9a5d47a439f..fb0caacaabee 100644
> --- a/drivers/rtc/rtc-pcf2127.c
> +++ b/drivers/rtc/rtc-pcf2127.c
> @@ -44,14 +44,17 @@
> #define PCF2127_BIT_CTRL3_BF BIT(3)
> #define PCF2127_BIT_CTRL3_BTSE BIT(4)
> /* Time and date registers */
> -#define PCF2127_REG_SC 0x03
> +#define PCF2127_REG_TIME_DATE_BASE 0x03
> +/* Time and date registers offsets (starting from base register) */
> +#define PCF2127_OFFSET_TD_SC 0
> +#define PCF2127_OFFSET_TD_MN 1
> +#define PCF2127_OFFSET_TD_HR 2
> +#define PCF2127_OFFSET_TD_DM 3
> +#define PCF2127_OFFSET_TD_DW 4
> +#define PCF2127_OFFSET_TD_MO 5
> +#define PCF2127_OFFSET_TD_YR 6
Same comment as for the alarms, I would simply remove the defines as
they don't really carry any useful information.
> +/* Time and date registers bits */
> #define PCF2127_BIT_SC_OSF BIT(7)
> -#define PCF2127_REG_MN 0x04
> -#define PCF2127_REG_HR 0x05
> -#define PCF2127_REG_DM 0x06
> -#define PCF2127_REG_DW 0x07
> -#define PCF2127_REG_MO 0x08
> -#define PCF2127_REG_YR 0x09
> /* Alarm registers */
> #define PCF2127_REG_ALARM_SC 0x0A
> #define PCF2127_REG_ALARM_MN 0x0B
> @@ -106,6 +109,7 @@ struct pcf21xx_config {
> int max_register;
> unsigned int has_nvmem:1;
> unsigned int has_bit_wd_ctl_cd0:1;
> + u8 regs_td_base; /* Time/data base registers. */
> };
>
> struct pcf2127 {
> @@ -125,27 +129,31 @@ struct pcf2127 {
> static int pcf2127_rtc_read_time(struct device *dev, struct rtc_time *tm)
> {
> struct pcf2127 *pcf2127 = dev_get_drvdata(dev);
> - unsigned char buf[10];
> + unsigned char buf[7];
> + unsigned int ctrl3;
> int ret;
>
> /*
> * Avoid reading CTRL2 register as it causes WD_VAL register
> * value to reset to 0 which means watchdog is stopped.
> */
> - ret = regmap_bulk_read(pcf2127->regmap, PCF2127_REG_CTRL3,
> - (buf + PCF2127_REG_CTRL3),
> - ARRAY_SIZE(buf) - PCF2127_REG_CTRL3);
> - if (ret) {
> - dev_err(dev, "%s: read error\n", __func__);
> + ret = regmap_read(pcf2127->regmap, PCF2127_REG_CTRL3, &ctrl3);
> + if (ret)
> return ret;
> - }
>
> - if (buf[PCF2127_REG_CTRL3] & PCF2127_BIT_CTRL3_BLF)
> + if (ctrl3 & PCF2127_BIT_CTRL3_BLF)
> dev_info(dev,
> "low voltage detected, check/replace RTC battery.\n");
>
> + ret = regmap_bulk_read(pcf2127->regmap, pcf2127->cfg->regs_td_base,
> + buf, sizeof(buf));
> + if (ret) {
> + dev_err(dev, "%s: read error\n", __func__);
> + return ret;
> + }
> +
> /* Clock integrity is not guaranteed when OSF flag is set. */
> - if (buf[PCF2127_REG_SC] & PCF2127_BIT_SC_OSF) {
> + if (buf[PCF2127_OFFSET_TD_SC] & PCF2127_BIT_SC_OSF) {
> /*
> * no need clear the flag here,
> * it will be cleared once the new date is saved
> @@ -158,18 +166,18 @@ static int pcf2127_rtc_read_time(struct device *dev, struct rtc_time *tm)
> dev_dbg(dev,
> "%s: raw data is cr3=%02x, sec=%02x, min=%02x, hr=%02x, "
> "mday=%02x, wday=%02x, mon=%02x, year=%02x\n",
> - __func__, buf[PCF2127_REG_CTRL3], buf[PCF2127_REG_SC],
> - buf[PCF2127_REG_MN], buf[PCF2127_REG_HR],
> - buf[PCF2127_REG_DM], buf[PCF2127_REG_DW],
> - buf[PCF2127_REG_MO], buf[PCF2127_REG_YR]);
> -
> - tm->tm_sec = bcd2bin(buf[PCF2127_REG_SC] & 0x7F);
> - tm->tm_min = bcd2bin(buf[PCF2127_REG_MN] & 0x7F);
> - tm->tm_hour = bcd2bin(buf[PCF2127_REG_HR] & 0x3F); /* rtc hr 0-23 */
> - tm->tm_mday = bcd2bin(buf[PCF2127_REG_DM] & 0x3F);
> - tm->tm_wday = buf[PCF2127_REG_DW] & 0x07;
> - tm->tm_mon = bcd2bin(buf[PCF2127_REG_MO] & 0x1F) - 1; /* rtc mn 1-12 */
> - tm->tm_year = bcd2bin(buf[PCF2127_REG_YR]);
> + __func__, ctrl3, buf[PCF2127_OFFSET_TD_SC],
> + buf[PCF2127_OFFSET_TD_MN], buf[PCF2127_OFFSET_TD_HR],
> + buf[PCF2127_OFFSET_TD_DM], buf[PCF2127_OFFSET_TD_DW],
> + buf[PCF2127_OFFSET_TD_MO], buf[PCF2127_OFFSET_TD_YR]);
> +
> + tm->tm_sec = bcd2bin(buf[PCF2127_OFFSET_TD_SC] & 0x7F);
> + tm->tm_min = bcd2bin(buf[PCF2127_OFFSET_TD_MN] & 0x7F);
> + tm->tm_hour = bcd2bin(buf[PCF2127_OFFSET_TD_HR] & 0x3F); /* rtc hr 0-23 */
You can drop the comment
> + tm->tm_mday = bcd2bin(buf[PCF2127_OFFSET_TD_DM] & 0x3F);
> + tm->tm_wday = buf[PCF2127_OFFSET_TD_DW] & 0x07;
> + tm->tm_mon = bcd2bin(buf[PCF2127_OFFSET_TD_MO] & 0x1F) - 1; /* rtc mn 1-12 */
This comment too.
> + tm->tm_year = bcd2bin(buf[PCF2127_OFFSET_TD_YR]);
> tm->tm_year += 100;
>
> dev_dbg(dev, "%s: tm is secs=%d, mins=%d, hours=%d, "
> @@ -207,7 +215,7 @@ static int pcf2127_rtc_set_time(struct device *dev, struct rtc_time *tm)
> buf[i++] = bin2bcd(tm->tm_year - 100);
>
> /* write register's data */
> - err = regmap_bulk_write(pcf2127->regmap, PCF2127_REG_SC, buf, i);
> + err = regmap_bulk_write(pcf2127->regmap, pcf2127->cfg->regs_td_base, buf, i);
> if (err) {
> dev_err(dev,
> "%s: err=%d", __func__, err);
> @@ -650,11 +658,13 @@ static struct pcf21xx_config pcf21xx_cfg[] = {
> .max_register = 0x1d,
> .has_nvmem = 1,
> .has_bit_wd_ctl_cd0 = 1,
> + .regs_td_base = PCF2127_REG_TIME_DATE_BASE,
> },
> [PCF2129] = {
> .max_register = 0x19,
> .has_nvmem = 0,
> .has_bit_wd_ctl_cd0 = 0,
> + .regs_td_base = PCF2127_REG_TIME_DATE_BASE,
> },
> };
>
> --
> 2.30.2
>
--
Alexandre Belloni, co-owner and COO, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com
On Fri, 20 Jan 2023 19:47:53 +0100
Alexandre Belloni <alexandre.belloni@bootlin.com> wrote:
> On 15/12/2022 10:02:03-0500, Hugo Villeneuve wrote:
> > From: Hugo Villeneuve <hvilleneuve@dimonoff.com>
> >
> > This will simplify the implementation of new variants into this driver.
> >
> > Some variants (PCF2131) have a 100th seconds register. This register is
> > currently not supported in this driver.
> >
> > Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com>
> > ---
> > drivers/rtc/rtc-pcf2127.c | 68 ++++++++++++++++++++++-----------------
> > 1 file changed, 39 insertions(+), 29 deletions(-)
> >
> > diff --git a/drivers/rtc/rtc-pcf2127.c b/drivers/rtc/rtc-pcf2127.c
> > index b9a5d47a439f..fb0caacaabee 100644
> > --- a/drivers/rtc/rtc-pcf2127.c
> > +++ b/drivers/rtc/rtc-pcf2127.c
> > @@ -44,14 +44,17 @@
> > #define PCF2127_BIT_CTRL3_BF BIT(3)
> > #define PCF2127_BIT_CTRL3_BTSE BIT(4)
> > /* Time and date registers */
> > -#define PCF2127_REG_SC 0x03
> > +#define PCF2127_REG_TIME_DATE_BASE 0x03
> > +/* Time and date registers offsets (starting from base register) */
> > +#define PCF2127_OFFSET_TD_SC 0
> > +#define PCF2127_OFFSET_TD_MN 1
> > +#define PCF2127_OFFSET_TD_HR 2
> > +#define PCF2127_OFFSET_TD_DM 3
> > +#define PCF2127_OFFSET_TD_DW 4
> > +#define PCF2127_OFFSET_TD_MO 5
> > +#define PCF2127_OFFSET_TD_YR 6
>
> Same comment as for the alarms, I would simply remove the defines as
> they don't really carry any useful information.
Note that if I remove them, the patch for pcf2127_rtc_read_time() would look like this:
/* Clock integrity is not guaranteed when OSF flag is set. */
- if (buf[PCF2127_REG_SC] & PCF2127_BIT_SC_OSF) {
+ if (buf[0] & PCF2127_BIT_SC_OSF) {
...
- __func__, buf[PCF2127_REG_CTRL3], buf[PCF2127_REG_SC],
- buf[PCF2127_REG_MN], buf[PCF2127_REG_HR],
- buf[PCF2127_REG_DM], buf[PCF2127_REG_DW],
- buf[PCF2127_REG_MO], buf[PCF2127_REG_YR]);
-
- tm->tm_sec = bcd2bin(buf[PCF2127_REG_SC] & 0x7F);
- tm->tm_min = bcd2bin(buf[PCF2127_REG_MN] & 0x7F);
- tm->tm_hour = bcd2bin(buf[PCF2127_REG_HR] & 0x3F); /* rtc hr 0-23 */
- tm->tm_mday = bcd2bin(buf[PCF2127_REG_DM] & 0x3F);
- tm->tm_wday = buf[PCF2127_REG_DW] & 0x07;
- tm->tm_mon = bcd2bin(buf[PCF2127_REG_MO] & 0x1F) - 1; /* rtc mn 1-12 */
- tm->tm_year = bcd2bin(buf[PCF2127_REG_YR]);
+ __func__, ctrl3, buf[0],
+ buf[1], buf[2],
+ buf[3], buf[4],
+ buf[5], buf[PCF2127_OFFSET_TD_YR]);
+
+ tm->tm_sec = bcd2bin(buf[0] & 0x7F);
+ tm->tm_min = bcd2bin(buf[1] & 0x7F);
+ tm->tm_hour = bcd2bin(buf[2] & 0x3F); /* rtc hr 0-23 */
+ tm->tm_mday = bcd2bin(buf[3] & 0x3F);
+ tm->tm_wday = buf[4] & 0x07;
+ tm->tm_mon = bcd2bin(buf[5] & 0x1F) - 1; /* rtc mn 1-12 */
+ tm->tm_year = bcd2bin(buf[6]);
Do you still want to remove the defines then?
> > +/* Time and date registers bits */
> > #define PCF2127_BIT_SC_OSF BIT(7)
> > -#define PCF2127_REG_MN 0x04
> > -#define PCF2127_REG_HR 0x05
> > -#define PCF2127_REG_DM 0x06
> > -#define PCF2127_REG_DW 0x07
> > -#define PCF2127_REG_MO 0x08
> > -#define PCF2127_REG_YR 0x09
> > /* Alarm registers */
> > #define PCF2127_REG_ALARM_SC 0x0A
> > #define PCF2127_REG_ALARM_MN 0x0B
> > @@ -106,6 +109,7 @@ struct pcf21xx_config {
> > int max_register;
> > unsigned int has_nvmem:1;
> > unsigned int has_bit_wd_ctl_cd0:1;
> > + u8 regs_td_base; /* Time/data base registers. */
> > };
> >
> > struct pcf2127 {
> > @@ -125,27 +129,31 @@ struct pcf2127 {
> > static int pcf2127_rtc_read_time(struct device *dev, struct rtc_time *tm)
> > {
> > struct pcf2127 *pcf2127 = dev_get_drvdata(dev);
> > - unsigned char buf[10];
> > + unsigned char buf[7];
> > + unsigned int ctrl3;
> > int ret;
> >
> > /*
> > * Avoid reading CTRL2 register as it causes WD_VAL register
> > * value to reset to 0 which means watchdog is stopped.
> > */
> > - ret = regmap_bulk_read(pcf2127->regmap, PCF2127_REG_CTRL3,
> > - (buf + PCF2127_REG_CTRL3),
> > - ARRAY_SIZE(buf) - PCF2127_REG_CTRL3);
> > - if (ret) {
> > - dev_err(dev, "%s: read error\n", __func__);
> > + ret = regmap_read(pcf2127->regmap, PCF2127_REG_CTRL3, &ctrl3);
> > + if (ret)
> > return ret;
> > - }
> >
> > - if (buf[PCF2127_REG_CTRL3] & PCF2127_BIT_CTRL3_BLF)
> > + if (ctrl3 & PCF2127_BIT_CTRL3_BLF)
> > dev_info(dev,
> > "low voltage detected, check/replace RTC battery.\n");
> >
> > + ret = regmap_bulk_read(pcf2127->regmap, pcf2127->cfg->regs_td_base,
> > + buf, sizeof(buf));
> > + if (ret) {
> > + dev_err(dev, "%s: read error\n", __func__);
> > + return ret;
> > + }
> > +
> > /* Clock integrity is not guaranteed when OSF flag is set. */
> > - if (buf[PCF2127_REG_SC] & PCF2127_BIT_SC_OSF) {
> > + if (buf[PCF2127_OFFSET_TD_SC] & PCF2127_BIT_SC_OSF) {
> > /*
> > * no need clear the flag here,
> > * it will be cleared once the new date is saved
> > @@ -158,18 +166,18 @@ static int pcf2127_rtc_read_time(struct device *dev, struct rtc_time *tm)
> > dev_dbg(dev,
> > "%s: raw data is cr3=%02x, sec=%02x, min=%02x, hr=%02x, "
> > "mday=%02x, wday=%02x, mon=%02x, year=%02x\n",
> > - __func__, buf[PCF2127_REG_CTRL3], buf[PCF2127_REG_SC],
> > - buf[PCF2127_REG_MN], buf[PCF2127_REG_HR],
> > - buf[PCF2127_REG_DM], buf[PCF2127_REG_DW],
> > - buf[PCF2127_REG_MO], buf[PCF2127_REG_YR]);
> > -
> > - tm->tm_sec = bcd2bin(buf[PCF2127_REG_SC] & 0x7F);
> > - tm->tm_min = bcd2bin(buf[PCF2127_REG_MN] & 0x7F);
> > - tm->tm_hour = bcd2bin(buf[PCF2127_REG_HR] & 0x3F); /* rtc hr 0-23 */
> > - tm->tm_mday = bcd2bin(buf[PCF2127_REG_DM] & 0x3F);
> > - tm->tm_wday = buf[PCF2127_REG_DW] & 0x07;
> > - tm->tm_mon = bcd2bin(buf[PCF2127_REG_MO] & 0x1F) - 1; /* rtc mn 1-12 */
> > - tm->tm_year = bcd2bin(buf[PCF2127_REG_YR]);
> > + __func__, ctrl3, buf[PCF2127_OFFSET_TD_SC],
> > + buf[PCF2127_OFFSET_TD_MN], buf[PCF2127_OFFSET_TD_HR],
> > + buf[PCF2127_OFFSET_TD_DM], buf[PCF2127_OFFSET_TD_DW],
> > + buf[PCF2127_OFFSET_TD_MO], buf[PCF2127_OFFSET_TD_YR]);
> > +
> > + tm->tm_sec = bcd2bin(buf[PCF2127_OFFSET_TD_SC] & 0x7F);
> > + tm->tm_min = bcd2bin(buf[PCF2127_OFFSET_TD_MN] & 0x7F);
> > + tm->tm_hour = bcd2bin(buf[PCF2127_OFFSET_TD_HR] & 0x3F); /* rtc hr 0-23 */
>
> You can drop the comment
Done
>
> > + tm->tm_mday = bcd2bin(buf[PCF2127_OFFSET_TD_DM] & 0x3F);
> > + tm->tm_wday = buf[PCF2127_OFFSET_TD_DW] & 0x07;
> > + tm->tm_mon = bcd2bin(buf[PCF2127_OFFSET_TD_MO] & 0x1F) - 1; /* rtc mn 1-12 */
>
> This comment too.
Done
>
> > + tm->tm_year = bcd2bin(buf[PCF2127_OFFSET_TD_YR]);
> > tm->tm_year += 100;
> >
> > dev_dbg(dev, "%s: tm is secs=%d, mins=%d, hours=%d, "
> > @@ -207,7 +215,7 @@ static int pcf2127_rtc_set_time(struct device *dev, struct rtc_time *tm)
> > buf[i++] = bin2bcd(tm->tm_year - 100);
> >
> > /* write register's data */
> > - err = regmap_bulk_write(pcf2127->regmap, PCF2127_REG_SC, buf, i);
> > + err = regmap_bulk_write(pcf2127->regmap, pcf2127->cfg->regs_td_base, buf, i);
> > if (err) {
> > dev_err(dev,
> > "%s: err=%d", __func__, err);
> > @@ -650,11 +658,13 @@ static struct pcf21xx_config pcf21xx_cfg[] = {
> > .max_register = 0x1d,
> > .has_nvmem = 1,
> > .has_bit_wd_ctl_cd0 = 1,
> > + .regs_td_base = PCF2127_REG_TIME_DATE_BASE,
> > },
> > [PCF2129] = {
> > .max_register = 0x19,
> > .has_nvmem = 0,
> > .has_bit_wd_ctl_cd0 = 0,
> > + .regs_td_base = PCF2127_REG_TIME_DATE_BASE,
> > },
> > };
> >
> > --
> > 2.30.2
> >
>
> --
> Alexandre Belloni, co-owner and COO, Bootlin
> Embedded Linux and Kernel engineering
> https://bootlin.com
>
--
Hugo Villeneuve <hugo@hugovil.com>
On 23/01/2023 10:54:57-0500, Hugo Villeneuve wrote:
> On Fri, 20 Jan 2023 19:47:53 +0100
> Alexandre Belloni <alexandre.belloni@bootlin.com> wrote:
>
> > On 15/12/2022 10:02:03-0500, Hugo Villeneuve wrote:
> > > From: Hugo Villeneuve <hvilleneuve@dimonoff.com>
> > >
> > > This will simplify the implementation of new variants into this driver.
> > >
> > > Some variants (PCF2131) have a 100th seconds register. This register is
> > > currently not supported in this driver.
> > >
> > > Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com>
> > > ---
> > > drivers/rtc/rtc-pcf2127.c | 68 ++++++++++++++++++++++-----------------
> > > 1 file changed, 39 insertions(+), 29 deletions(-)
> > >
> > > diff --git a/drivers/rtc/rtc-pcf2127.c b/drivers/rtc/rtc-pcf2127.c
> > > index b9a5d47a439f..fb0caacaabee 100644
> > > --- a/drivers/rtc/rtc-pcf2127.c
> > > +++ b/drivers/rtc/rtc-pcf2127.c
> > > @@ -44,14 +44,17 @@
> > > #define PCF2127_BIT_CTRL3_BF BIT(3)
> > > #define PCF2127_BIT_CTRL3_BTSE BIT(4)
> > > /* Time and date registers */
> > > -#define PCF2127_REG_SC 0x03
> > > +#define PCF2127_REG_TIME_DATE_BASE 0x03
> > > +/* Time and date registers offsets (starting from base register) */
> > > +#define PCF2127_OFFSET_TD_SC 0
> > > +#define PCF2127_OFFSET_TD_MN 1
> > > +#define PCF2127_OFFSET_TD_HR 2
> > > +#define PCF2127_OFFSET_TD_DM 3
> > > +#define PCF2127_OFFSET_TD_DW 4
> > > +#define PCF2127_OFFSET_TD_MO 5
> > > +#define PCF2127_OFFSET_TD_YR 6
> >
> > Same comment as for the alarms, I would simply remove the defines as
> > they don't really carry any useful information.
>
> Note that if I remove them, the patch for pcf2127_rtc_read_time() would look like this:
>
> /* Clock integrity is not guaranteed when OSF flag is set. */
> - if (buf[PCF2127_REG_SC] & PCF2127_BIT_SC_OSF) {
> + if (buf[0] & PCF2127_BIT_SC_OSF) {
> ...
> - __func__, buf[PCF2127_REG_CTRL3], buf[PCF2127_REG_SC],
> - buf[PCF2127_REG_MN], buf[PCF2127_REG_HR],
> - buf[PCF2127_REG_DM], buf[PCF2127_REG_DW],
> - buf[PCF2127_REG_MO], buf[PCF2127_REG_YR]);
> -
> - tm->tm_sec = bcd2bin(buf[PCF2127_REG_SC] & 0x7F);
> - tm->tm_min = bcd2bin(buf[PCF2127_REG_MN] & 0x7F);
> - tm->tm_hour = bcd2bin(buf[PCF2127_REG_HR] & 0x3F); /* rtc hr 0-23 */
> - tm->tm_mday = bcd2bin(buf[PCF2127_REG_DM] & 0x3F);
> - tm->tm_wday = buf[PCF2127_REG_DW] & 0x07;
> - tm->tm_mon = bcd2bin(buf[PCF2127_REG_MO] & 0x1F) - 1; /* rtc mn 1-12 */
> - tm->tm_year = bcd2bin(buf[PCF2127_REG_YR]);
> + __func__, ctrl3, buf[0],
> + buf[1], buf[2],
> + buf[3], buf[4],
> + buf[5], buf[PCF2127_OFFSET_TD_YR]);
> +
> + tm->tm_sec = bcd2bin(buf[0] & 0x7F);
> + tm->tm_min = bcd2bin(buf[1] & 0x7F);
> + tm->tm_hour = bcd2bin(buf[2] & 0x3F); /* rtc hr 0-23 */
> + tm->tm_mday = bcd2bin(buf[3] & 0x3F);
> + tm->tm_wday = buf[4] & 0x07;
> + tm->tm_mon = bcd2bin(buf[5] & 0x1F) - 1; /* rtc mn 1-12 */
> + tm->tm_year = bcd2bin(buf[6]);
>
> Do you still want to remove the defines then?
This is fine, yes.
>
>
> > > +/* Time and date registers bits */
> > > #define PCF2127_BIT_SC_OSF BIT(7)
> > > -#define PCF2127_REG_MN 0x04
> > > -#define PCF2127_REG_HR 0x05
> > > -#define PCF2127_REG_DM 0x06
> > > -#define PCF2127_REG_DW 0x07
> > > -#define PCF2127_REG_MO 0x08
> > > -#define PCF2127_REG_YR 0x09
> > > /* Alarm registers */
> > > #define PCF2127_REG_ALARM_SC 0x0A
> > > #define PCF2127_REG_ALARM_MN 0x0B
> > > @@ -106,6 +109,7 @@ struct pcf21xx_config {
> > > int max_register;
> > > unsigned int has_nvmem:1;
> > > unsigned int has_bit_wd_ctl_cd0:1;
> > > + u8 regs_td_base; /* Time/data base registers. */
> > > };
> > >
> > > struct pcf2127 {
> > > @@ -125,27 +129,31 @@ struct pcf2127 {
> > > static int pcf2127_rtc_read_time(struct device *dev, struct rtc_time *tm)
> > > {
> > > struct pcf2127 *pcf2127 = dev_get_drvdata(dev);
> > > - unsigned char buf[10];
> > > + unsigned char buf[7];
> > > + unsigned int ctrl3;
> > > int ret;
> > >
> > > /*
> > > * Avoid reading CTRL2 register as it causes WD_VAL register
> > > * value to reset to 0 which means watchdog is stopped.
> > > */
> > > - ret = regmap_bulk_read(pcf2127->regmap, PCF2127_REG_CTRL3,
> > > - (buf + PCF2127_REG_CTRL3),
> > > - ARRAY_SIZE(buf) - PCF2127_REG_CTRL3);
> > > - if (ret) {
> > > - dev_err(dev, "%s: read error\n", __func__);
> > > + ret = regmap_read(pcf2127->regmap, PCF2127_REG_CTRL3, &ctrl3);
> > > + if (ret)
> > > return ret;
> > > - }
> > >
> > > - if (buf[PCF2127_REG_CTRL3] & PCF2127_BIT_CTRL3_BLF)
> > > + if (ctrl3 & PCF2127_BIT_CTRL3_BLF)
> > > dev_info(dev,
> > > "low voltage detected, check/replace RTC battery.\n");
> > >
> > > + ret = regmap_bulk_read(pcf2127->regmap, pcf2127->cfg->regs_td_base,
> > > + buf, sizeof(buf));
> > > + if (ret) {
> > > + dev_err(dev, "%s: read error\n", __func__);
> > > + return ret;
> > > + }
> > > +
> > > /* Clock integrity is not guaranteed when OSF flag is set. */
> > > - if (buf[PCF2127_REG_SC] & PCF2127_BIT_SC_OSF) {
> > > + if (buf[PCF2127_OFFSET_TD_SC] & PCF2127_BIT_SC_OSF) {
> > > /*
> > > * no need clear the flag here,
> > > * it will be cleared once the new date is saved
> > > @@ -158,18 +166,18 @@ static int pcf2127_rtc_read_time(struct device *dev, struct rtc_time *tm)
> > > dev_dbg(dev,
> > > "%s: raw data is cr3=%02x, sec=%02x, min=%02x, hr=%02x, "
> > > "mday=%02x, wday=%02x, mon=%02x, year=%02x\n",
> > > - __func__, buf[PCF2127_REG_CTRL3], buf[PCF2127_REG_SC],
> > > - buf[PCF2127_REG_MN], buf[PCF2127_REG_HR],
> > > - buf[PCF2127_REG_DM], buf[PCF2127_REG_DW],
> > > - buf[PCF2127_REG_MO], buf[PCF2127_REG_YR]);
> > > -
> > > - tm->tm_sec = bcd2bin(buf[PCF2127_REG_SC] & 0x7F);
> > > - tm->tm_min = bcd2bin(buf[PCF2127_REG_MN] & 0x7F);
> > > - tm->tm_hour = bcd2bin(buf[PCF2127_REG_HR] & 0x3F); /* rtc hr 0-23 */
> > > - tm->tm_mday = bcd2bin(buf[PCF2127_REG_DM] & 0x3F);
> > > - tm->tm_wday = buf[PCF2127_REG_DW] & 0x07;
> > > - tm->tm_mon = bcd2bin(buf[PCF2127_REG_MO] & 0x1F) - 1; /* rtc mn 1-12 */
> > > - tm->tm_year = bcd2bin(buf[PCF2127_REG_YR]);
> > > + __func__, ctrl3, buf[PCF2127_OFFSET_TD_SC],
> > > + buf[PCF2127_OFFSET_TD_MN], buf[PCF2127_OFFSET_TD_HR],
> > > + buf[PCF2127_OFFSET_TD_DM], buf[PCF2127_OFFSET_TD_DW],
> > > + buf[PCF2127_OFFSET_TD_MO], buf[PCF2127_OFFSET_TD_YR]);
> > > +
> > > + tm->tm_sec = bcd2bin(buf[PCF2127_OFFSET_TD_SC] & 0x7F);
> > > + tm->tm_min = bcd2bin(buf[PCF2127_OFFSET_TD_MN] & 0x7F);
> > > + tm->tm_hour = bcd2bin(buf[PCF2127_OFFSET_TD_HR] & 0x3F); /* rtc hr 0-23 */
> >
> > You can drop the comment
>
> Done
>
> >
> > > + tm->tm_mday = bcd2bin(buf[PCF2127_OFFSET_TD_DM] & 0x3F);
> > > + tm->tm_wday = buf[PCF2127_OFFSET_TD_DW] & 0x07;
> > > + tm->tm_mon = bcd2bin(buf[PCF2127_OFFSET_TD_MO] & 0x1F) - 1; /* rtc mn 1-12 */
> >
> > This comment too.
>
> Done
>
> >
> > > + tm->tm_year = bcd2bin(buf[PCF2127_OFFSET_TD_YR]);
> > > tm->tm_year += 100;
> > >
> > > dev_dbg(dev, "%s: tm is secs=%d, mins=%d, hours=%d, "
> > > @@ -207,7 +215,7 @@ static int pcf2127_rtc_set_time(struct device *dev, struct rtc_time *tm)
> > > buf[i++] = bin2bcd(tm->tm_year - 100);
> > >
> > > /* write register's data */
> > > - err = regmap_bulk_write(pcf2127->regmap, PCF2127_REG_SC, buf, i);
> > > + err = regmap_bulk_write(pcf2127->regmap, pcf2127->cfg->regs_td_base, buf, i);
> > > if (err) {
> > > dev_err(dev,
> > > "%s: err=%d", __func__, err);
> > > @@ -650,11 +658,13 @@ static struct pcf21xx_config pcf21xx_cfg[] = {
> > > .max_register = 0x1d,
> > > .has_nvmem = 1,
> > > .has_bit_wd_ctl_cd0 = 1,
> > > + .regs_td_base = PCF2127_REG_TIME_DATE_BASE,
> > > },
> > > [PCF2129] = {
> > > .max_register = 0x19,
> > > .has_nvmem = 0,
> > > .has_bit_wd_ctl_cd0 = 0,
> > > + .regs_td_base = PCF2127_REG_TIME_DATE_BASE,
> > > },
> > > };
> > >
> > > --
> > > 2.30.2
> > >
> >
> > --
> > Alexandre Belloni, co-owner and COO, Bootlin
> > Embedded Linux and Kernel engineering
> > https://bootlin.com
> >
>
>
> --
> Hugo Villeneuve <hugo@hugovil.com>
--
Alexandre Belloni, co-owner and COO, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com
Den tor. 15. dec. 2022 kl. 16.20 skrev Hugo Villeneuve <hugo@hugovil.com>:
>
> From: Hugo Villeneuve <hvilleneuve@dimonoff.com>
>
> This will simplify the implementation of new variants into this driver.
>
> Some variants (PCF2131) have a 100th seconds register. This register is
> currently not supported in this driver.
>
> Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com>
> ---
> drivers/rtc/rtc-pcf2127.c | 68 ++++++++++++++++++++++-----------------
> 1 file changed, 39 insertions(+), 29 deletions(-)
>
> diff --git a/drivers/rtc/rtc-pcf2127.c b/drivers/rtc/rtc-pcf2127.c
> index b9a5d47a439f..fb0caacaabee 100644
> --- a/drivers/rtc/rtc-pcf2127.c
> +++ b/drivers/rtc/rtc-pcf2127.c
> @@ -44,14 +44,17 @@
> #define PCF2127_BIT_CTRL3_BF BIT(3)
> #define PCF2127_BIT_CTRL3_BTSE BIT(4)
> /* Time and date registers */
> -#define PCF2127_REG_SC 0x03
> +#define PCF2127_REG_TIME_DATE_BASE 0x03
> +/* Time and date registers offsets (starting from base register) */
> +#define PCF2127_OFFSET_TD_SC 0
> +#define PCF2127_OFFSET_TD_MN 1
> +#define PCF2127_OFFSET_TD_HR 2
> +#define PCF2127_OFFSET_TD_DM 3
> +#define PCF2127_OFFSET_TD_DW 4
> +#define PCF2127_OFFSET_TD_MO 5
> +#define PCF2127_OFFSET_TD_YR 6
> +/* Time and date registers bits */
> #define PCF2127_BIT_SC_OSF BIT(7)
> -#define PCF2127_REG_MN 0x04
> -#define PCF2127_REG_HR 0x05
> -#define PCF2127_REG_DM 0x06
> -#define PCF2127_REG_DW 0x07
> -#define PCF2127_REG_MO 0x08
> -#define PCF2127_REG_YR 0x09
> /* Alarm registers */
> #define PCF2127_REG_ALARM_SC 0x0A
> #define PCF2127_REG_ALARM_MN 0x0B
> @@ -106,6 +109,7 @@ struct pcf21xx_config {
> int max_register;
> unsigned int has_nvmem:1;
> unsigned int has_bit_wd_ctl_cd0:1;
> + u8 regs_td_base; /* Time/data base registers. */
There is only one base register, so no need to add s.
I think td is an odd short, so maybe u8 reg_time_base.
/Bruno
> };
>
> struct pcf2127 {
> @@ -125,27 +129,31 @@ struct pcf2127 {
> static int pcf2127_rtc_read_time(struct device *dev, struct rtc_time *tm)
> {
> struct pcf2127 *pcf2127 = dev_get_drvdata(dev);
> - unsigned char buf[10];
> + unsigned char buf[7];
> + unsigned int ctrl3;
> int ret;
>
> /*
> * Avoid reading CTRL2 register as it causes WD_VAL register
> * value to reset to 0 which means watchdog is stopped.
> */
> - ret = regmap_bulk_read(pcf2127->regmap, PCF2127_REG_CTRL3,
> - (buf + PCF2127_REG_CTRL3),
> - ARRAY_SIZE(buf) - PCF2127_REG_CTRL3);
> - if (ret) {
> - dev_err(dev, "%s: read error\n", __func__);
> + ret = regmap_read(pcf2127->regmap, PCF2127_REG_CTRL3, &ctrl3);
> + if (ret)
> return ret;
> - }
>
> - if (buf[PCF2127_REG_CTRL3] & PCF2127_BIT_CTRL3_BLF)
> + if (ctrl3 & PCF2127_BIT_CTRL3_BLF)
> dev_info(dev,
> "low voltage detected, check/replace RTC battery.\n");
>
> + ret = regmap_bulk_read(pcf2127->regmap, pcf2127->cfg->regs_td_base,
> + buf, sizeof(buf));
> + if (ret) {
> + dev_err(dev, "%s: read error\n", __func__);
> + return ret;
> + }
> +
> /* Clock integrity is not guaranteed when OSF flag is set. */
> - if (buf[PCF2127_REG_SC] & PCF2127_BIT_SC_OSF) {
> + if (buf[PCF2127_OFFSET_TD_SC] & PCF2127_BIT_SC_OSF) {
> /*
> * no need clear the flag here,
> * it will be cleared once the new date is saved
> @@ -158,18 +166,18 @@ static int pcf2127_rtc_read_time(struct device *dev, struct rtc_time *tm)
> dev_dbg(dev,
> "%s: raw data is cr3=%02x, sec=%02x, min=%02x, hr=%02x, "
> "mday=%02x, wday=%02x, mon=%02x, year=%02x\n",
> - __func__, buf[PCF2127_REG_CTRL3], buf[PCF2127_REG_SC],
> - buf[PCF2127_REG_MN], buf[PCF2127_REG_HR],
> - buf[PCF2127_REG_DM], buf[PCF2127_REG_DW],
> - buf[PCF2127_REG_MO], buf[PCF2127_REG_YR]);
> -
> - tm->tm_sec = bcd2bin(buf[PCF2127_REG_SC] & 0x7F);
> - tm->tm_min = bcd2bin(buf[PCF2127_REG_MN] & 0x7F);
> - tm->tm_hour = bcd2bin(buf[PCF2127_REG_HR] & 0x3F); /* rtc hr 0-23 */
> - tm->tm_mday = bcd2bin(buf[PCF2127_REG_DM] & 0x3F);
> - tm->tm_wday = buf[PCF2127_REG_DW] & 0x07;
> - tm->tm_mon = bcd2bin(buf[PCF2127_REG_MO] & 0x1F) - 1; /* rtc mn 1-12 */
> - tm->tm_year = bcd2bin(buf[PCF2127_REG_YR]);
> + __func__, ctrl3, buf[PCF2127_OFFSET_TD_SC],
> + buf[PCF2127_OFFSET_TD_MN], buf[PCF2127_OFFSET_TD_HR],
> + buf[PCF2127_OFFSET_TD_DM], buf[PCF2127_OFFSET_TD_DW],
> + buf[PCF2127_OFFSET_TD_MO], buf[PCF2127_OFFSET_TD_YR]);
> +
> + tm->tm_sec = bcd2bin(buf[PCF2127_OFFSET_TD_SC] & 0x7F);
> + tm->tm_min = bcd2bin(buf[PCF2127_OFFSET_TD_MN] & 0x7F);
> + tm->tm_hour = bcd2bin(buf[PCF2127_OFFSET_TD_HR] & 0x3F); /* rtc hr 0-23 */
> + tm->tm_mday = bcd2bin(buf[PCF2127_OFFSET_TD_DM] & 0x3F);
> + tm->tm_wday = buf[PCF2127_OFFSET_TD_DW] & 0x07;
> + tm->tm_mon = bcd2bin(buf[PCF2127_OFFSET_TD_MO] & 0x1F) - 1; /* rtc mn 1-12 */
> + tm->tm_year = bcd2bin(buf[PCF2127_OFFSET_TD_YR]);
> tm->tm_year += 100;
>
> dev_dbg(dev, "%s: tm is secs=%d, mins=%d, hours=%d, "
> @@ -207,7 +215,7 @@ static int pcf2127_rtc_set_time(struct device *dev, struct rtc_time *tm)
> buf[i++] = bin2bcd(tm->tm_year - 100);
>
> /* write register's data */
> - err = regmap_bulk_write(pcf2127->regmap, PCF2127_REG_SC, buf, i);
> + err = regmap_bulk_write(pcf2127->regmap, pcf2127->cfg->regs_td_base, buf, i);
> if (err) {
> dev_err(dev,
> "%s: err=%d", __func__, err);
> @@ -650,11 +658,13 @@ static struct pcf21xx_config pcf21xx_cfg[] = {
> .max_register = 0x1d,
> .has_nvmem = 1,
> .has_bit_wd_ctl_cd0 = 1,
> + .regs_td_base = PCF2127_REG_TIME_DATE_BASE,
> },
> [PCF2129] = {
> .max_register = 0x19,
> .has_nvmem = 0,
> .has_bit_wd_ctl_cd0 = 0,
> + .regs_td_base = PCF2127_REG_TIME_DATE_BASE,
> },
> };
>
> --
> 2.30.2
>
Den man. 19. dec. 2022 kl. 10.34 skrev Bruno Thomsen <bruno.thomsen@gmail.com>:
>
> Den tor. 15. dec. 2022 kl. 16.20 skrev Hugo Villeneuve <hugo@hugovil.com>:
> >
> > From: Hugo Villeneuve <hvilleneuve@dimonoff.com>
> >
> > This will simplify the implementation of new variants into this driver.
> >
> > Some variants (PCF2131) have a 100th seconds register. This register is
> > currently not supported in this driver.
> >
> > Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com>
> > ---
> > drivers/rtc/rtc-pcf2127.c | 68 ++++++++++++++++++++++-----------------
> > 1 file changed, 39 insertions(+), 29 deletions(-)
> >
> > diff --git a/drivers/rtc/rtc-pcf2127.c b/drivers/rtc/rtc-pcf2127.c
> > index b9a5d47a439f..fb0caacaabee 100644
> > --- a/drivers/rtc/rtc-pcf2127.c
> > +++ b/drivers/rtc/rtc-pcf2127.c
> > @@ -44,14 +44,17 @@
> > #define PCF2127_BIT_CTRL3_BF BIT(3)
> > #define PCF2127_BIT_CTRL3_BTSE BIT(4)
> > /* Time and date registers */
> > -#define PCF2127_REG_SC 0x03
> > +#define PCF2127_REG_TIME_DATE_BASE 0x03
> > +/* Time and date registers offsets (starting from base register) */
> > +#define PCF2127_OFFSET_TD_SC 0
Maybe do the same change for register defines as the pc721xx_config
struct parameter. This will also match what you did in patch 3 with
alarm registers.
- PCF2127_REG_TIME_DATE_BASE
+ PCF2127_REG_TIME_BASE
- PCF2127_OFFSET_TD_SC
+ PCF2127_OFFSET_TIME_SC
etc.
> > +#define PCF2127_OFFSET_TD_MN 1
> > +#define PCF2127_OFFSET_TD_HR 2
> > +#define PCF2127_OFFSET_TD_DM 3
> > +#define PCF2127_OFFSET_TD_DW 4
> > +#define PCF2127_OFFSET_TD_MO 5
> > +#define PCF2127_OFFSET_TD_YR 6
> > +/* Time and date registers bits */
> > #define PCF2127_BIT_SC_OSF BIT(7)
> > -#define PCF2127_REG_MN 0x04
> > -#define PCF2127_REG_HR 0x05
> > -#define PCF2127_REG_DM 0x06
> > -#define PCF2127_REG_DW 0x07
> > -#define PCF2127_REG_MO 0x08
> > -#define PCF2127_REG_YR 0x09
> > /* Alarm registers */
> > #define PCF2127_REG_ALARM_SC 0x0A
> > #define PCF2127_REG_ALARM_MN 0x0B
> > @@ -106,6 +109,7 @@ struct pcf21xx_config {
> > int max_register;
> > unsigned int has_nvmem:1;
> > unsigned int has_bit_wd_ctl_cd0:1;
> > + u8 regs_td_base; /* Time/data base registers. */
>
> There is only one base register, so no need to add s.
> I think td is an odd short, so maybe u8 reg_time_base.
>
> /Bruno
>
> > };
> >
> > struct pcf2127 {
> > @@ -125,27 +129,31 @@ struct pcf2127 {
> > static int pcf2127_rtc_read_time(struct device *dev, struct rtc_time *tm)
> > {
> > struct pcf2127 *pcf2127 = dev_get_drvdata(dev);
> > - unsigned char buf[10];
> > + unsigned char buf[7];
> > + unsigned int ctrl3;
> > int ret;
> >
> > /*
> > * Avoid reading CTRL2 register as it causes WD_VAL register
> > * value to reset to 0 which means watchdog is stopped.
> > */
> > - ret = regmap_bulk_read(pcf2127->regmap, PCF2127_REG_CTRL3,
> > - (buf + PCF2127_REG_CTRL3),
> > - ARRAY_SIZE(buf) - PCF2127_REG_CTRL3);
> > - if (ret) {
> > - dev_err(dev, "%s: read error\n", __func__);
> > + ret = regmap_read(pcf2127->regmap, PCF2127_REG_CTRL3, &ctrl3);
> > + if (ret)
> > return ret;
> > - }
> >
> > - if (buf[PCF2127_REG_CTRL3] & PCF2127_BIT_CTRL3_BLF)
> > + if (ctrl3 & PCF2127_BIT_CTRL3_BLF)
> > dev_info(dev,
> > "low voltage detected, check/replace RTC battery.\n");
> >
> > + ret = regmap_bulk_read(pcf2127->regmap, pcf2127->cfg->regs_td_base,
> > + buf, sizeof(buf));
> > + if (ret) {
> > + dev_err(dev, "%s: read error\n", __func__);
> > + return ret;
> > + }
> > +
> > /* Clock integrity is not guaranteed when OSF flag is set. */
> > - if (buf[PCF2127_REG_SC] & PCF2127_BIT_SC_OSF) {
> > + if (buf[PCF2127_OFFSET_TD_SC] & PCF2127_BIT_SC_OSF) {
> > /*
> > * no need clear the flag here,
> > * it will be cleared once the new date is saved
> > @@ -158,18 +166,18 @@ static int pcf2127_rtc_read_time(struct device *dev, struct rtc_time *tm)
> > dev_dbg(dev,
> > "%s: raw data is cr3=%02x, sec=%02x, min=%02x, hr=%02x, "
> > "mday=%02x, wday=%02x, mon=%02x, year=%02x\n",
> > - __func__, buf[PCF2127_REG_CTRL3], buf[PCF2127_REG_SC],
> > - buf[PCF2127_REG_MN], buf[PCF2127_REG_HR],
> > - buf[PCF2127_REG_DM], buf[PCF2127_REG_DW],
> > - buf[PCF2127_REG_MO], buf[PCF2127_REG_YR]);
> > -
> > - tm->tm_sec = bcd2bin(buf[PCF2127_REG_SC] & 0x7F);
> > - tm->tm_min = bcd2bin(buf[PCF2127_REG_MN] & 0x7F);
> > - tm->tm_hour = bcd2bin(buf[PCF2127_REG_HR] & 0x3F); /* rtc hr 0-23 */
> > - tm->tm_mday = bcd2bin(buf[PCF2127_REG_DM] & 0x3F);
> > - tm->tm_wday = buf[PCF2127_REG_DW] & 0x07;
> > - tm->tm_mon = bcd2bin(buf[PCF2127_REG_MO] & 0x1F) - 1; /* rtc mn 1-12 */
> > - tm->tm_year = bcd2bin(buf[PCF2127_REG_YR]);
> > + __func__, ctrl3, buf[PCF2127_OFFSET_TD_SC],
> > + buf[PCF2127_OFFSET_TD_MN], buf[PCF2127_OFFSET_TD_HR],
> > + buf[PCF2127_OFFSET_TD_DM], buf[PCF2127_OFFSET_TD_DW],
> > + buf[PCF2127_OFFSET_TD_MO], buf[PCF2127_OFFSET_TD_YR]);
> > +
> > + tm->tm_sec = bcd2bin(buf[PCF2127_OFFSET_TD_SC] & 0x7F);
> > + tm->tm_min = bcd2bin(buf[PCF2127_OFFSET_TD_MN] & 0x7F);
> > + tm->tm_hour = bcd2bin(buf[PCF2127_OFFSET_TD_HR] & 0x3F); /* rtc hr 0-23 */
> > + tm->tm_mday = bcd2bin(buf[PCF2127_OFFSET_TD_DM] & 0x3F);
> > + tm->tm_wday = buf[PCF2127_OFFSET_TD_DW] & 0x07;
> > + tm->tm_mon = bcd2bin(buf[PCF2127_OFFSET_TD_MO] & 0x1F) - 1; /* rtc mn 1-12 */
> > + tm->tm_year = bcd2bin(buf[PCF2127_OFFSET_TD_YR]);
> > tm->tm_year += 100;
> >
> > dev_dbg(dev, "%s: tm is secs=%d, mins=%d, hours=%d, "
> > @@ -207,7 +215,7 @@ static int pcf2127_rtc_set_time(struct device *dev, struct rtc_time *tm)
> > buf[i++] = bin2bcd(tm->tm_year - 100);
> >
> > /* write register's data */
> > - err = regmap_bulk_write(pcf2127->regmap, PCF2127_REG_SC, buf, i);
> > + err = regmap_bulk_write(pcf2127->regmap, pcf2127->cfg->regs_td_base, buf, i);
> > if (err) {
> > dev_err(dev,
> > "%s: err=%d", __func__, err);
> > @@ -650,11 +658,13 @@ static struct pcf21xx_config pcf21xx_cfg[] = {
> > .max_register = 0x1d,
> > .has_nvmem = 1,
> > .has_bit_wd_ctl_cd0 = 1,
> > + .regs_td_base = PCF2127_REG_TIME_DATE_BASE,
> > },
> > [PCF2129] = {
> > .max_register = 0x19,
> > .has_nvmem = 0,
> > .has_bit_wd_ctl_cd0 = 0,
> > + .regs_td_base = PCF2127_REG_TIME_DATE_BASE,
> > },
> > };
> >
> > --
> > 2.30.2
> >
On Mon, 19 Dec 2022 10:34:08 +0100
Bruno Thomsen <bruno.thomsen@gmail.com> wrote:
> Den tor. 15. dec. 2022 kl. 16.20 skrev Hugo Villeneuve <hugo@hugovil.com>:
> >
> > From: Hugo Villeneuve <hvilleneuve@dimonoff.com>
> >
> > This will simplify the implementation of new variants into this driver.
> >
> > Some variants (PCF2131) have a 100th seconds register. This register is
> > currently not supported in this driver.
> >
> > Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com>
> > ---
> > drivers/rtc/rtc-pcf2127.c | 68 ++++++++++++++++++++++-----------------
> > 1 file changed, 39 insertions(+), 29 deletions(-)
> >
> > diff --git a/drivers/rtc/rtc-pcf2127.c b/drivers/rtc/rtc-pcf2127.c
> > index b9a5d47a439f..fb0caacaabee 100644
> > --- a/drivers/rtc/rtc-pcf2127.c
> > +++ b/drivers/rtc/rtc-pcf2127.c
> > @@ -44,14 +44,17 @@
> > #define PCF2127_BIT_CTRL3_BF BIT(3)
> > #define PCF2127_BIT_CTRL3_BTSE BIT(4)
> > /* Time and date registers */
> > -#define PCF2127_REG_SC 0x03
> > +#define PCF2127_REG_TIME_DATE_BASE 0x03
> > +/* Time and date registers offsets (starting from base register) */
> > +#define PCF2127_OFFSET_TD_SC 0
> > +#define PCF2127_OFFSET_TD_MN 1
> > +#define PCF2127_OFFSET_TD_HR 2
> > +#define PCF2127_OFFSET_TD_DM 3
> > +#define PCF2127_OFFSET_TD_DW 4
> > +#define PCF2127_OFFSET_TD_MO 5
> > +#define PCF2127_OFFSET_TD_YR 6
> > +/* Time and date registers bits */
> > #define PCF2127_BIT_SC_OSF BIT(7)
> > -#define PCF2127_REG_MN 0x04
> > -#define PCF2127_REG_HR 0x05
> > -#define PCF2127_REG_DM 0x06
> > -#define PCF2127_REG_DW 0x07
> > -#define PCF2127_REG_MO 0x08
> > -#define PCF2127_REG_YR 0x09
> > /* Alarm registers */
> > #define PCF2127_REG_ALARM_SC 0x0A
> > #define PCF2127_REG_ALARM_MN 0x0B
> > @@ -106,6 +109,7 @@ struct pcf21xx_config {
> > int max_register;
> > unsigned int has_nvmem:1;
> > unsigned int has_bit_wd_ctl_cd0:1;
> > + u8 regs_td_base; /* Time/data base registers. */
>
> There is only one base register, so no need to add s.
> I think td is an odd short, so maybe u8 reg_time_base.
>
> /Bruno
Hi,
it makes sense, I will fix it in V4.
I will also fix the comment "Time/data" -> "Time/date".
Hugo.
> > };
> >
> > struct pcf2127 {
> > @@ -125,27 +129,31 @@ struct pcf2127 {
> > static int pcf2127_rtc_read_time(struct device *dev, struct rtc_time *tm)
> > {
> > struct pcf2127 *pcf2127 = dev_get_drvdata(dev);
> > - unsigned char buf[10];
> > + unsigned char buf[7];
> > + unsigned int ctrl3;
> > int ret;
> >
> > /*
> > * Avoid reading CTRL2 register as it causes WD_VAL register
> > * value to reset to 0 which means watchdog is stopped.
> > */
> > - ret = regmap_bulk_read(pcf2127->regmap, PCF2127_REG_CTRL3,
> > - (buf + PCF2127_REG_CTRL3),
> > - ARRAY_SIZE(buf) - PCF2127_REG_CTRL3);
> > - if (ret) {
> > - dev_err(dev, "%s: read error\n", __func__);
> > + ret = regmap_read(pcf2127->regmap, PCF2127_REG_CTRL3, &ctrl3);
> > + if (ret)
> > return ret;
> > - }
> >
> > - if (buf[PCF2127_REG_CTRL3] & PCF2127_BIT_CTRL3_BLF)
> > + if (ctrl3 & PCF2127_BIT_CTRL3_BLF)
> > dev_info(dev,
> > "low voltage detected, check/replace RTC battery.\n");
> >
> > + ret = regmap_bulk_read(pcf2127->regmap, pcf2127->cfg->regs_td_base,
> > + buf, sizeof(buf));
> > + if (ret) {
> > + dev_err(dev, "%s: read error\n", __func__);
> > + return ret;
> > + }
> > +
> > /* Clock integrity is not guaranteed when OSF flag is set. */
> > - if (buf[PCF2127_REG_SC] & PCF2127_BIT_SC_OSF) {
> > + if (buf[PCF2127_OFFSET_TD_SC] & PCF2127_BIT_SC_OSF) {
> > /*
> > * no need clear the flag here,
> > * it will be cleared once the new date is saved
> > @@ -158,18 +166,18 @@ static int pcf2127_rtc_read_time(struct device *dev, struct rtc_time *tm)
> > dev_dbg(dev,
> > "%s: raw data is cr3=%02x, sec=%02x, min=%02x, hr=%02x, "
> > "mday=%02x, wday=%02x, mon=%02x, year=%02x\n",
> > - __func__, buf[PCF2127_REG_CTRL3], buf[PCF2127_REG_SC],
> > - buf[PCF2127_REG_MN], buf[PCF2127_REG_HR],
> > - buf[PCF2127_REG_DM], buf[PCF2127_REG_DW],
> > - buf[PCF2127_REG_MO], buf[PCF2127_REG_YR]);
> > -
> > - tm->tm_sec = bcd2bin(buf[PCF2127_REG_SC] & 0x7F);
> > - tm->tm_min = bcd2bin(buf[PCF2127_REG_MN] & 0x7F);
> > - tm->tm_hour = bcd2bin(buf[PCF2127_REG_HR] & 0x3F); /* rtc hr 0-23 */
> > - tm->tm_mday = bcd2bin(buf[PCF2127_REG_DM] & 0x3F);
> > - tm->tm_wday = buf[PCF2127_REG_DW] & 0x07;
> > - tm->tm_mon = bcd2bin(buf[PCF2127_REG_MO] & 0x1F) - 1; /* rtc mn 1-12 */
> > - tm->tm_year = bcd2bin(buf[PCF2127_REG_YR]);
> > + __func__, ctrl3, buf[PCF2127_OFFSET_TD_SC],
> > + buf[PCF2127_OFFSET_TD_MN], buf[PCF2127_OFFSET_TD_HR],
> > + buf[PCF2127_OFFSET_TD_DM], buf[PCF2127_OFFSET_TD_DW],
> > + buf[PCF2127_OFFSET_TD_MO], buf[PCF2127_OFFSET_TD_YR]);
> > +
> > + tm->tm_sec = bcd2bin(buf[PCF2127_OFFSET_TD_SC] & 0x7F);
> > + tm->tm_min = bcd2bin(buf[PCF2127_OFFSET_TD_MN] & 0x7F);
> > + tm->tm_hour = bcd2bin(buf[PCF2127_OFFSET_TD_HR] & 0x3F); /* rtc hr 0-23 */
> > + tm->tm_mday = bcd2bin(buf[PCF2127_OFFSET_TD_DM] & 0x3F);
> > + tm->tm_wday = buf[PCF2127_OFFSET_TD_DW] & 0x07;
> > + tm->tm_mon = bcd2bin(buf[PCF2127_OFFSET_TD_MO] & 0x1F) - 1; /* rtc mn 1-12 */
> > + tm->tm_year = bcd2bin(buf[PCF2127_OFFSET_TD_YR]);
> > tm->tm_year += 100;
> >
> > dev_dbg(dev, "%s: tm is secs=%d, mins=%d, hours=%d, "
> > @@ -207,7 +215,7 @@ static int pcf2127_rtc_set_time(struct device *dev, struct rtc_time *tm)
> > buf[i++] = bin2bcd(tm->tm_year - 100);
> >
> > /* write register's data */
> > - err = regmap_bulk_write(pcf2127->regmap, PCF2127_REG_SC, buf, i);
> > + err = regmap_bulk_write(pcf2127->regmap, pcf2127->cfg->regs_td_base, buf, i);
> > if (err) {
> > dev_err(dev,
> > "%s: err=%d", __func__, err);
> > @@ -650,11 +658,13 @@ static struct pcf21xx_config pcf21xx_cfg[] = {
> > .max_register = 0x1d,
> > .has_nvmem = 1,
> > .has_bit_wd_ctl_cd0 = 1,
> > + .regs_td_base = PCF2127_REG_TIME_DATE_BASE,
> > },
> > [PCF2129] = {
> > .max_register = 0x19,
> > .has_nvmem = 0,
> > .has_bit_wd_ctl_cd0 = 0,
> > + .regs_td_base = PCF2127_REG_TIME_DATE_BASE,
> > },
> > };
> >
> > --
> > 2.30.2
> >
>
--
Hugo Villeneuve <hugo@hugovil.com>
© 2016 - 2026 Red Hat, Inc.