... and USB support
On 2022-12-15 00:20:43, Marijn Suijten wrote:
> Add pinctrl nodes to enable SD Cards to work on the Sony Loire platform,
> and define extcon nodes in PMI8950 to feed into the ci-hdrc driver as it
> cannot figure out the presence of a USB cable (nor the desired role
> based on the ID pin) on its own. While at it, extend PMI8950 with some
> more channels with now-available VADC_ register constants.
>
> Depends on:
> - Fix pm8941-misc extcon interrupt dependency assumptions:
> https://lore.kernel.org/linux-arm-msm/20220926113143.40768-1-bryan.odonoghue@linaro.org/
> - dt-bindings: iio: qcom-spmi-vadc: Add definitions for USB DP/DM VADCs:
> https://lore.kernel.org/linux-arm-msm/20221111120156.48040-2-angelogioacchino.delregno@collabora.com/
>
> Marijn Suijten (6):
> arm64: dts: qcom: pmi8950: Add USB vbus and id sensing nodes
> arm64: dts: qcom: msm8956-loire: Add usb vbus and id extcons to
> ci-hdrc
> arm64: dts: qcom: pmi8950: Add missing ADC channels
> arm64: dts: qcom: msm8976: Declare and use SDC1 pins
> arm64: dts: qcom: msm8976: Declare and use SDC2 pins
> arm64: dts: qcom: msm8956-loire: Add SD Card Detect to SDC2 pin states
>
> .../qcom/msm8956-sony-xperia-loire-kugo.dts | 6 ++
> .../dts/qcom/msm8956-sony-xperia-loire.dtsi | 25 +++++
> arch/arm64/boot/dts/qcom/msm8976.dtsi | 100 ++++++++++++++++++
> arch/arm64/boot/dts/qcom/pmi8950.dtsi | 38 +++++++
> 4 files changed, 169 insertions(+)
>
> --
> 2.39.0
>