The lack of platform data in the contemporary Linux
shall not be the reason to display warnings to the
kernel logs.
Signed-off-by: Lukasz Majewski <lukma@denx.de>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
---
Changes for v2:
- None
---
sound/soc/codecs/wm8940.c | 4 +---
1 file changed, 1 insertion(+), 3 deletions(-)
diff --git a/sound/soc/codecs/wm8940.c b/sound/soc/codecs/wm8940.c
index 8dac9fd88547..0b59020d747f 100644
--- a/sound/soc/codecs/wm8940.c
+++ b/sound/soc/codecs/wm8940.c
@@ -709,9 +709,7 @@ static int wm8940_probe(struct snd_soc_component *component)
if (ret < 0)
return ret;
- if (!pdata)
- dev_warn(component->dev, "No platform data supplied\n");
- else {
+ if (pdata) {
reg = snd_soc_component_read(component, WM8940_OUTPUTCTL);
ret = snd_soc_component_write(component, WM8940_OUTPUTCTL, reg | pdata->vroi);
if (ret < 0)
--
2.20.1On Thu, Dec 15, 2022 at 10:36:13AM +0100, Lukasz Majewski wrote: > The lack of platform data in the contemporary Linux > shall not be the reason to display warnings to the > kernel logs. Please don't send new patches in reply to old patches or serieses, this makes it harder for both people and tools to understand what is going on - it can bury things in mailboxes and make it difficult to keep track of what current patches are, both for the new patches and the old ones.
Hi Mark, > On Thu, Dec 15, 2022 at 10:36:13AM +0100, Lukasz Majewski wrote: > > The lack of platform data in the contemporary Linux > > shall not be the reason to display warnings to the > > kernel logs. > > Please don't send new patches in reply to old patches or serieses, > this makes it harder for both people and tools to understand what is > going on - it can bury things in mailboxes and make it difficult to > keep track of what current patches are, both for the new patches and > the old ones. Ok. I will not use --in-reply-to. Best regards, Lukasz Majewski -- DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-59 Fax: (+49)-8142-66989-80 Email: lukma@denx.de
This patch enables support for internal wm8940's PLL and proper
divider to set proper value for 256x fs clock.
This approach is more flexible and replaces hardcoded clock
values and makes the codec work with the simple-card driver.
Card drivers calling set_pll() and set_clkdiv() directly are
unaffected.
For the reference - code in this commit is based on:
"ASoC: wm8974: configure pll and mclk divider automatically"
(SHA1: 51b2bb3f2568e6d9d81a001d38b8d70c2ba4af99).
Signed-off-by: Lukasz Majewski <lukma@denx.de>
---
Changes for v2:
- Remove not required line add/remove
- Rewrite the commit message to describe more precisely the
problem
---
sound/soc/codecs/wm8940.c | 101 +++++++++++++++++++++++++++++++-------
1 file changed, 82 insertions(+), 19 deletions(-)
diff --git a/sound/soc/codecs/wm8940.c b/sound/soc/codecs/wm8940.c
index 0b59020d747f..1b02d5e8a007 100644
--- a/sound/soc/codecs/wm8940.c
+++ b/sound/soc/codecs/wm8940.c
@@ -37,7 +37,9 @@
#include "wm8940.h"
struct wm8940_priv {
- unsigned int sysclk;
+ unsigned int mclk;
+ unsigned int fs;
+
struct regmap *regmap;
};
@@ -387,17 +389,24 @@ static int wm8940_set_dai_fmt(struct snd_soc_dai *codec_dai,
return 0;
}
+static int wm8940_update_clocks(struct snd_soc_dai *dai);
static int wm8940_i2s_hw_params(struct snd_pcm_substream *substream,
struct snd_pcm_hw_params *params,
struct snd_soc_dai *dai)
{
struct snd_soc_component *component = dai->component;
+ struct wm8940_priv *priv = snd_soc_component_get_drvdata(component);
u16 iface = snd_soc_component_read(component, WM8940_IFACE) & 0xFD9F;
u16 addcntrl = snd_soc_component_read(component, WM8940_ADDCNTRL) & 0xFFF1;
u16 companding = snd_soc_component_read(component,
WM8940_COMPANDINGCTL) & 0xFFDF;
int ret;
+ priv->fs = params_rate(params);
+ ret = wm8940_update_clocks(dai);
+ if (ret)
+ return ret;
+
/* LoutR control */
if (substream->stream == SNDRV_PCM_STREAM_CAPTURE
&& params_channels(params) == 2)
@@ -611,24 +620,6 @@ static int wm8940_set_dai_pll(struct snd_soc_dai *codec_dai, int pll_id,
return 0;
}
-static int wm8940_set_dai_sysclk(struct snd_soc_dai *codec_dai,
- int clk_id, unsigned int freq, int dir)
-{
- struct snd_soc_component *component = codec_dai->component;
- struct wm8940_priv *wm8940 = snd_soc_component_get_drvdata(component);
-
- switch (freq) {
- case 11289600:
- case 12000000:
- case 12288000:
- case 16934400:
- case 18432000:
- wm8940->sysclk = freq;
- return 0;
- }
- return -EINVAL;
-}
-
static int wm8940_set_dai_clkdiv(struct snd_soc_dai *codec_dai,
int div_id, int div)
{
@@ -653,6 +644,78 @@ static int wm8940_set_dai_clkdiv(struct snd_soc_dai *codec_dai,
return ret;
}
+static unsigned int wm8940_get_mclkdiv(unsigned int f_in, unsigned int f_out,
+ int *mclkdiv)
+{
+ unsigned int ratio = 2 * f_in / f_out;
+
+ if (ratio <= 2) {
+ *mclkdiv = WM8940_MCLKDIV_1;
+ ratio = 2;
+ } else if (ratio == 3) {
+ *mclkdiv = WM8940_MCLKDIV_1_5;
+ } else if (ratio == 4) {
+ *mclkdiv = WM8940_MCLKDIV_2;
+ } else if (ratio <= 6) {
+ *mclkdiv = WM8940_MCLKDIV_3;
+ ratio = 6;
+ } else if (ratio <= 8) {
+ *mclkdiv = WM8940_MCLKDIV_4;
+ ratio = 8;
+ } else if (ratio <= 12) {
+ *mclkdiv = WM8940_MCLKDIV_6;
+ ratio = 12;
+ } else if (ratio <= 16) {
+ *mclkdiv = WM8940_MCLKDIV_8;
+ ratio = 16;
+ } else {
+ *mclkdiv = WM8940_MCLKDIV_12;
+ ratio = 24;
+ }
+
+ return f_out * ratio / 2;
+}
+
+static int wm8940_update_clocks(struct snd_soc_dai *dai)
+{
+ struct snd_soc_component *codec = dai->component;
+ struct wm8940_priv *priv = snd_soc_component_get_drvdata(codec);
+ unsigned int fs256;
+ unsigned int fpll = 0;
+ unsigned int f;
+ int mclkdiv;
+
+ if (!priv->mclk || !priv->fs)
+ return 0;
+
+ fs256 = 256 * priv->fs;
+
+ f = wm8940_get_mclkdiv(priv->mclk, fs256, &mclkdiv);
+ if (f != priv->mclk) {
+ /* The PLL performs best around 90MHz */
+ fpll = wm8940_get_mclkdiv(22500000, fs256, &mclkdiv);
+ }
+
+ wm8940_set_dai_pll(dai, 0, 0, priv->mclk, fpll);
+ wm8940_set_dai_clkdiv(dai, WM8940_MCLKDIV, mclkdiv);
+
+ return 0;
+}
+
+static int wm8940_set_dai_sysclk(struct snd_soc_dai *dai, int clk_id,
+ unsigned int freq, int dir)
+{
+ struct snd_soc_component *codec = dai->component;
+ struct wm8940_priv *priv = snd_soc_component_get_drvdata(codec);
+
+ if (dir != SND_SOC_CLOCK_IN)
+ return -EINVAL;
+
+ priv->mclk = freq;
+
+ return wm8940_update_clocks(dai);
+}
+
#define WM8940_RATES SNDRV_PCM_RATE_8000_48000
#define WM8940_FORMATS (SNDRV_PCM_FMTBIT_S8 | \
--
2.20.1On Thu, Dec 15, 2022 at 10:36:14AM +0100, Lukasz Majewski wrote:
> This patch enables support for internal wm8940's PLL and proper
> divider to set proper value for 256x fs clock.
>
> This approach is more flexible and replaces hardcoded clock
> values and makes the codec work with the simple-card driver.
> Card drivers calling set_pll() and set_clkdiv() directly are
> unaffected.
>
> For the reference - code in this commit is based on:
> "ASoC: wm8974: configure pll and mclk divider automatically"
> (SHA1: 51b2bb3f2568e6d9d81a001d38b8d70c2ba4af99).
Minor nit this doesn't quite match the commit <12-chars of SHA>
("<description>") format in Submitting-patches.rst.
>
> Signed-off-by: Lukasz Majewski <lukma@denx.de>
> ---
But the patch looks good to me:
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Thanks,
Charles
The wm8940 provides the chip ID information via I2C. In this
patch this information is read and if not matching expected
value, the probe function is aborted.
This prevents from using (i.e. inserting) other wm89* modules
which use the same I2C bus address.
Signed-off-by: Lukasz Majewski <lukma@denx.de>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
---
Changes for v2:
- None
---
sound/soc/codecs/wm8940.c | 11 +++++++++++
sound/soc/codecs/wm8940.h | 3 +++
2 files changed, 14 insertions(+)
diff --git a/sound/soc/codecs/wm8940.c b/sound/soc/codecs/wm8940.c
index 1b02d5e8a007..8eb4782c9232 100644
--- a/sound/soc/codecs/wm8940.c
+++ b/sound/soc/codecs/wm8940.c
@@ -760,6 +760,17 @@ static int wm8940_probe(struct snd_soc_component *component)
int ret;
u16 reg;
+ /*
+ * Check chip ID for wm8940 - value of 0x00 offset
+ * SOFTWARE_RESET on write
+ * CHIP_ID on read
+ */
+ reg = snd_soc_component_read(component, WM8940_SOFTRESET);
+ if (reg != WM8940_CHIP_ID) {
+ dev_err(component->dev, "Wrong wm8940 chip ID: 0x%x\n", reg);
+ return -ENODEV;
+ }
+
ret = wm8940_reset(component);
if (ret < 0) {
dev_err(component->dev, "Failed to issue reset\n");
diff --git a/sound/soc/codecs/wm8940.h b/sound/soc/codecs/wm8940.h
index 0d4f53ada2e6..86bbf902ef5a 100644
--- a/sound/soc/codecs/wm8940.h
+++ b/sound/soc/codecs/wm8940.h
@@ -95,5 +95,8 @@ struct wm8940_setup_data {
#define WM8940_OPCLKDIV_3 2
#define WM8940_OPCLKDIV_4 3
+/* Chip ID */
+#define WM8940_CHIP_ID 0x8940
+
#endif /* _WM8940_H */
--
2.20.1© 2016 - 2025 Red Hat, Inc.