pm_runtime_force_suspend() cannot be used with DPM_FLAG_SMART_SUSPEND, so
note this in the kerneldoc.

If DPM_FLAG_SMART_SUSPEND is set and the PM core cannot skip system resume
it will call pm_runtime_active() on the driver. This can lead to an
inconsistent state where:

  pm_runtime_force_suspend() called ->runtime_suspend

but

  device_resume_noirq() called pm_runtime_set_active()

This leaves the driver actually suspended but marked as active.

Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
---
 drivers/base/power/runtime.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/base/power/runtime.c b/drivers/base/power/runtime.c
index 50e726b6c2cf..b29be7d4d7d0 100644
--- a/drivers/base/power/runtime.c
+++ b/drivers/base/power/runtime.c
@@ -1864,6 +1864,10 @@ static bool pm_runtime_need_not_resume(struct device *dev)
  * sure the device is put into low power state and it should only be used during
  * system-wide PM transitions to sleep states.  It assumes that the analogous
  * pm_runtime_force_resume() will be used to resume the device.
+ *
+ * Do not use with DPM_FLAG_SMART_SUSPEND as this can lead to an inconsistent
+ * state where this function has called the ->runtime_suspend callback but the
+ * PM core marks the driver as runtime active.
  */
 int pm_runtime_force_suspend(struct device *dev)
 {
-- 
2.30.2

On Tue, Dec 13, 2022 at 4:54 PM Richard Fitzgerald
<rf@opensource.cirrus.com> wrote:
>
> pm_runtime_force_suspend() cannot be used with DPM_FLAG_SMART_SUSPEND, so
> note this in the kerneldoc.
>
> If DPM_FLAG_SMART_SUSPEND is set and the PM core cannot skip system resume
> it will call pm_runtime_active() on the driver. This can lead to an
> inconsistent state where:
>
>   pm_runtime_force_suspend() called ->runtime_suspend
>
> but
>
>   device_resume_noirq() called pm_runtime_set_active()
>
> This leaves the driver actually suspended but marked as active.
>
> Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
> ---
>  drivers/base/power/runtime.c | 4 ++++
>  1 file changed, 4 insertions(+)
>
> diff --git a/drivers/base/power/runtime.c b/drivers/base/power/runtime.c
> index 50e726b6c2cf..b29be7d4d7d0 100644
> --- a/drivers/base/power/runtime.c
> +++ b/drivers/base/power/runtime.c
> @@ -1864,6 +1864,10 @@ static bool pm_runtime_need_not_resume(struct device *dev)
>   * sure the device is put into low power state and it should only be used during
>   * system-wide PM transitions to sleep states.  It assumes that the analogous
>   * pm_runtime_force_resume() will be used to resume the device.
> + *
> + * Do not use with DPM_FLAG_SMART_SUSPEND as this can lead to an inconsistent
> + * state where this function has called the ->runtime_suspend callback but the
> + * PM core marks the driver as runtime active.
>   */
>  int pm_runtime_force_suspend(struct device *dev)
>  {
> --

Applied as 6.3 material, thanks!