On 13.12.2022 13:38, Bhupesh Sharma wrote:
> Normally the 'maximum-speed' and 'dr_mode' properties
> of a USB controller + port is dependent on the type of
> the ports, regulators and mode change interrupt routing
> available on the board(s).
>
> So, move the same from the sm6115 dtsi file to respective
> board file(s).
>
> Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org>
> ---
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Konrad
> arch/arm64/boot/dts/qcom/sm4250-oneplus-billie2.dts | 5 +++++
> arch/arm64/boot/dts/qcom/sm6115.dtsi | 2 --
> 2 files changed, 5 insertions(+), 2 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/qcom/sm4250-oneplus-billie2.dts b/arch/arm64/boot/dts/qcom/sm4250-oneplus-billie2.dts
> index fa57f4bf58256..3f39f25e0721e 100644
> --- a/arch/arm64/boot/dts/qcom/sm4250-oneplus-billie2.dts
> +++ b/arch/arm64/boot/dts/qcom/sm4250-oneplus-billie2.dts
> @@ -229,6 +229,11 @@ &usb {
> status = "okay";
> };
>
> +&usb_dwc3 {
> + maximum-speed = "high-speed";
> + dr_mode = "peripheral";
> +};
> +
> &usb_hsphy {
> vdd-supply = <&vreg_l4a>;
> vdda-pll-supply = <&vreg_l12a>;
> diff --git a/arch/arm64/boot/dts/qcom/sm6115.dtsi b/arch/arm64/boot/dts/qcom/sm6115.dtsi
> index b5f7480c2e713..e4ce135264f3d 100644
> --- a/arch/arm64/boot/dts/qcom/sm6115.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sm6115.dtsi
> @@ -1031,8 +1031,6 @@ usb_dwc3: usb@4e00000 {
> snps,has-lpm-erratum;
> snps,hird-threshold = /bits/ 8 <0x10>;
> snps,usb3_lpm_capable;
> - maximum-speed = "high-speed";
> - dr_mode = "peripheral";
> };
> };
>