Add the camera clock controller node and CCI nodes to sm6350 dtsi and enable
the i2c busses on Fairphone 4 dts.

This is tested using PM8008 regulator patches from the lists which power the
cameras, and using i2cdetect/i2cget/i2cset reading the sensor ID registers.

Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
---
Changes in v2:
- Correct ordering of attributes in sm6350.dtsi (#*-cells, pinctrl-names,
  bias-*)
- Link to v1: https://lore.kernel.org/r/20221213-sm6350-cci-v1-0-e5d0c36e0c4f@fairphone.com

---
Luca Weiss (4):
      dt-bindings: i2c: qcom-cci: Document SM6350 compatible
      arm64: dts: qcom: sm6350: Add camera clock controller
      arm64: dts: qcom: sm6350: Add CCI nodes
      arm64: dts: qcom: sm7225-fairphone-fp4: Enable CCI busses

 .../devicetree/bindings/i2c/qcom,i2c-cci.yaml      |   2 +
 arch/arm64/boot/dts/qcom/sm6350.dtsi               | 141 +++++++++++++++++++++
 arch/arm64/boot/dts/qcom/sm7225-fairphone-fp4.dts  |  20 +++
 3 files changed, 163 insertions(+)
---
base-commit: 1578f85d549045aac441821064e7953732460e51
change-id: 20221213-sm6350-cci-38baf19ace3b

Best regards,
-- 
Luca Weiss <luca.weiss@fairphone.com>

On Fri, 20 Jan 2023 14:13:43 +0100, Luca Weiss wrote:
> Add the camera clock controller node and CCI nodes to sm6350 dtsi and enable
> the i2c busses on Fairphone 4 dts.
> 
> This is tested using PM8008 regulator patches from the lists which power the
> cameras, and using i2cdetect/i2cget/i2cset reading the sensor ID registers.
> 
> 
> [...]

Applied, thanks!

[2/4] arm64: dts: qcom: sm6350: Add camera clock controller
      commit: 4ab96c9c4012770f50f90bda2e61ef774bb63be5
[3/4] arm64: dts: qcom: sm6350: Add CCI nodes
      commit: 033fb15f39b8f092bf4664144784a3e19c834f26
[4/4] arm64: dts: qcom: sm7225-fairphone-fp4: Enable CCI busses
      commit: bd3dc67bbc34d684c7d94865bb10283508d7cd84

Best regards,
-- 
Bjorn Andersson <andersson@kernel.org>