arm64: dts: imx8mq-thor96: fix no-mmc property for SDHCI

[PATCH] arm64: dts: imx8mq-thor96: fix no-mmc property for SDHCI

Krzysztof Kozlowski posted 1 patch 3 years, 4 months ago

Download mbox

arch/arm64/boot/dts/freescale/imx8mq-thor96.dts | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)

Expand all Fold all

[PATCH] arm64: dts: imx8mq-thor96: fix no-mmc property for SDHCI

Posted by Krzysztof Kozlowski 3 years, 4 months ago

There is no "no-emmc" property, so intention for SD/SDIO only nodes was
to use "no-mmc".

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
 arch/arm64/boot/dts/freescale/imx8mq-thor96.dts | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/freescale/imx8mq-thor96.dts b/arch/arm64/boot/dts/freescale/imx8mq-thor96.dts
index 5d5aa6537225..6e6182709d22 100644
--- a/arch/arm64/boot/dts/freescale/imx8mq-thor96.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mq-thor96.dts
@@ -339,7 +339,7 @@ &usdhc1 {
 	bus-width = <4>;
 	non-removable;
 	no-sd;
-	no-emmc;
+	no-mmc;
 	status = "okay";
 
 	brcmf: wifi@1 {
@@ -359,7 +359,7 @@ &usdhc2 {
 	cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
 	bus-width = <4>;
 	no-sdio;
-	no-emmc;
+	no-mmc;
 	disable-wp;
 	status = "okay";
 };
-- 
2.34.1

Re: [PATCH] arm64: dts: imx8mq-thor96: fix no-mmc property for SDHCI

Posted by Shawn Guo 3 years, 3 months ago

On Sun, Dec 04, 2022 at 10:44:17AM +0100, Krzysztof Kozlowski wrote:
> There is no "no-emmc" property, so intention for SD/SDIO only nodes was
> to use "no-mmc".
> 
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

Applied, thanks!