Defer probe if firmware is not ready for device usage.
Signed-off-by: Veerasenareddy Burru <vburru@marvell.com>
Signed-off-by: Abhijit Ayarekar <aayarekar@marvell.com>
Signed-off-by: Satananda Burla <sburla@marvell.com>
---
v1 -> v2:
* was scheduling workqueue task to wait for firmware ready,
to probe/initialize the device.
* now, removed the workqueue task; the probe returns EPROBE_DEFER,
if firmware is not ready.
* removed device status oct->status, as it is not required with the
modified implementation.
.../ethernet/marvell/octeon_ep/octep_main.c | 26 +++++++++++++++++++
1 file changed, 26 insertions(+)
diff --git a/drivers/net/ethernet/marvell/octeon_ep/octep_main.c b/drivers/net/ethernet/marvell/octeon_ep/octep_main.c
index 5a898fb88e37..aa7d0ced9807 100644
--- a/drivers/net/ethernet/marvell/octeon_ep/octep_main.c
+++ b/drivers/net/ethernet/marvell/octeon_ep/octep_main.c
@@ -1017,6 +1017,25 @@ static void octep_device_cleanup(struct octep_device *oct)
oct->conf = NULL;
}
+static u8 get_fw_ready_status(struct pci_dev *pdev)
+{
+ u32 pos = 0;
+ u16 vsec_id;
+ u8 status;
+
+ while ((pos = pci_find_next_ext_capability(pdev, pos,
+ PCI_EXT_CAP_ID_VNDR))) {
+ pci_read_config_word(pdev, pos + 4, &vsec_id);
+#define FW_STATUS_VSEC_ID 0xA3
+ if (vsec_id == FW_STATUS_VSEC_ID) {
+ pci_read_config_byte(pdev, (pos + 8), &status);
+ dev_info(&pdev->dev, "Firmware ready %u\n", status);
+ return status;
+ }
+ }
+ return 0;
+}
+
/**
* octep_probe() - Octeon PCI device probe handler.
*
@@ -1053,6 +1072,13 @@ static int octep_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
pci_enable_pcie_error_reporting(pdev);
pci_set_master(pdev);
+#define FW_STATUS_READY 1
+ if (get_fw_ready_status(pdev) != FW_STATUS_READY) {
+ dev_notice(&pdev->dev, "Firmware not ready; defer probe.\n");
+ err = -EPROBE_DEFER;
+ goto err_alloc_netdev;
+ }
+
netdev = alloc_etherdev_mq(sizeof(struct octep_device),
OCTEP_MAX_QUEUES);
if (!netdev) {
--
2.36.0On Tue, Nov 29, 2022 at 05:09:24AM -0800, Veerasenareddy Burru wrote:
> Defer probe if firmware is not ready for device usage.
>
> Signed-off-by: Veerasenareddy Burru <vburru@marvell.com>
> Signed-off-by: Abhijit Ayarekar <aayarekar@marvell.com>
> Signed-off-by: Satananda Burla <sburla@marvell.com>
> ---
> v1 -> v2:
> * was scheduling workqueue task to wait for firmware ready,
> to probe/initialize the device.
> * now, removed the workqueue task; the probe returns EPROBE_DEFER,
> if firmware is not ready.
> * removed device status oct->status, as it is not required with the
> modified implementation.
>
> .../ethernet/marvell/octeon_ep/octep_main.c | 26 +++++++++++++++++++
> 1 file changed, 26 insertions(+)
>
> diff --git a/drivers/net/ethernet/marvell/octeon_ep/octep_main.c b/drivers/net/ethernet/marvell/octeon_ep/octep_main.c
> index 5a898fb88e37..aa7d0ced9807 100644
> --- a/drivers/net/ethernet/marvell/octeon_ep/octep_main.c
> +++ b/drivers/net/ethernet/marvell/octeon_ep/octep_main.c
> @@ -1017,6 +1017,25 @@ static void octep_device_cleanup(struct octep_device *oct)
> oct->conf = NULL;
> }
>
> +static u8 get_fw_ready_status(struct pci_dev *pdev)
Please change this function to return bool, you are not interested in
status.
> +{
> + u32 pos = 0;
> + u16 vsec_id;
> + u8 status;
> +
> + while ((pos = pci_find_next_ext_capability(pdev, pos,
> + PCI_EXT_CAP_ID_VNDR))) {
> + pci_read_config_word(pdev, pos + 4, &vsec_id);
> +#define FW_STATUS_VSEC_ID 0xA3
> + if (vsec_id == FW_STATUS_VSEC_ID) {
Success oriented flow, plase
if (vsec_id != FW_STATUS_VSEC_ID)
cotitnue;
....
> + pci_read_config_byte(pdev, (pos + 8), &status);
> + dev_info(&pdev->dev, "Firmware ready %u\n", status);
> + return status;
> + }
> + }
> + return 0;
> +}
> +
> /**
> * octep_probe() - Octeon PCI device probe handler.
> *
> @@ -1053,6 +1072,13 @@ static int octep_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
> pci_enable_pcie_error_reporting(pdev);
> pci_set_master(pdev);
>
> +#define FW_STATUS_READY 1
> + if (get_fw_ready_status(pdev) != FW_STATUS_READY) {
No need to this new define if you change get_fw_ready_status() to return
true/false.
And I think that you can put this check earlier in octep_probe().
Thanks
> + dev_notice(&pdev->dev, "Firmware not ready; defer probe.\n");
> + err = -EPROBE_DEFER;
> + goto err_alloc_netdev;
> + }
> +
> netdev = alloc_etherdev_mq(sizeof(struct octep_device),
> OCTEP_MAX_QUEUES);
> if (!netdev) {
> --
> 2.36.0
>
> -----Original Message-----
> From: Leon Romanovsky <leon@kernel.org>
> Sent: Wednesday, November 30, 2022 1:25 AM
> To: Veerasenareddy Burru <vburru@marvell.com>
> Cc: netdev@vger.kernel.org; linux-kernel@vger.kernel.org; Liron Himi
> <lironh@marvell.com>; Abhijit Ayarekar <aayarekar@marvell.com>; Sathesh
> B Edara <sedara@marvell.com>; Satananda Burla <sburla@marvell.com>;
> linux-doc@vger.kernel.org; David S. Miller <davem@davemloft.net>; Eric
> Dumazet <edumazet@google.com>; Jakub Kicinski <kuba@kernel.org>;
> Paolo Abeni <pabeni@redhat.com>
> Subject: [EXT] Re: [PATCH net-next v2 1/9] octeon_ep: defer probe if
> firmware not ready
>
> External Email
>
> ----------------------------------------------------------------------
> On Tue, Nov 29, 2022 at 05:09:24AM -0800, Veerasenareddy Burru wrote:
> > Defer probe if firmware is not ready for device usage.
> >
> > Signed-off-by: Veerasenareddy Burru <vburru@marvell.com>
> > Signed-off-by: Abhijit Ayarekar <aayarekar@marvell.com>
> > Signed-off-by: Satananda Burla <sburla@marvell.com>
> > ---
> > v1 -> v2:
> > * was scheduling workqueue task to wait for firmware ready,
> > to probe/initialize the device.
> > * now, removed the workqueue task; the probe returns EPROBE_DEFER,
> > if firmware is not ready.
> > * removed device status oct->status, as it is not required with the
> > modified implementation.
> >
> > .../ethernet/marvell/octeon_ep/octep_main.c | 26
> +++++++++++++++++++
> > 1 file changed, 26 insertions(+)
> >
> > diff --git a/drivers/net/ethernet/marvell/octeon_ep/octep_main.c
> > b/drivers/net/ethernet/marvell/octeon_ep/octep_main.c
> > index 5a898fb88e37..aa7d0ced9807 100644
> > --- a/drivers/net/ethernet/marvell/octeon_ep/octep_main.c
> > +++ b/drivers/net/ethernet/marvell/octeon_ep/octep_main.c
> > @@ -1017,6 +1017,25 @@ static void octep_device_cleanup(struct
> octep_device *oct)
> > oct->conf = NULL;
> > }
> >
> > +static u8 get_fw_ready_status(struct pci_dev *pdev)
>
> Please change this function to return bool, you are not interested in status.
>
Yes, we can just return bool; Thanks for the suggestion. Will implement this.
> > +{
> > + u32 pos = 0;
> > + u16 vsec_id;
> > + u8 status;
> > +
> > + while ((pos = pci_find_next_ext_capability(pdev, pos,
> > + PCI_EXT_CAP_ID_VNDR))) {
> > + pci_read_config_word(pdev, pos + 4, &vsec_id); #define
> > +FW_STATUS_VSEC_ID 0xA3
> > + if (vsec_id == FW_STATUS_VSEC_ID) {
>
> Success oriented flow, plase
> if (vsec_id != FW_STATUS_VSEC_ID)
> cotitnue;
>
> ....
>
Sure, will change this.
> > + pci_read_config_byte(pdev, (pos + 8), &status);
> > + dev_info(&pdev->dev, "Firmware ready %u\n",
> status);
> > + return status;
> > + }
> > + }
> > + return 0;
> > +}
> > +
> > /**
> > * octep_probe() - Octeon PCI device probe handler.
> > *
> > @@ -1053,6 +1072,13 @@ static int octep_probe(struct pci_dev *pdev,
> const struct pci_device_id *ent)
> > pci_enable_pcie_error_reporting(pdev);
> > pci_set_master(pdev);
> >
> > +#define FW_STATUS_READY 1
> > + if (get_fw_ready_status(pdev) != FW_STATUS_READY) {
>
> No need to this new define if you change get_fw_ready_status() to return
> true/false.
We will change this to true/false.
>
> And I think that you can put this check earlier in octep_probe().
We will check and move this to earlier point in octep_probe().
Thanks
>
> Thanks
>
> > + dev_notice(&pdev->dev, "Firmware not ready; defer
> probe.\n");
> > + err = -EPROBE_DEFER;
> > + goto err_alloc_netdev;
> > + }
> > +
> > netdev = alloc_etherdev_mq(sizeof(struct octep_device),
> > OCTEP_MAX_QUEUES);
> > if (!netdev) {
> > --
> > 2.36.0
> >
© 2016 - 2025 Red Hat, Inc.