arch/arm/boot/dts/stih410-b2260.dts | 8 ++++---- arch/arm/boot/dts/stih418-b2199.dts | 4 ++-- arch/arm/boot/dts/stih418-b2264.dts | 2 +- arch/arm/boot/dts/stihxxx-b2120.dtsi | 4 ++-- 4 files changed, 9 insertions(+), 9 deletions(-)
The node names should be generic and DT schema expects certain pattern:
stih407-b2120.dtb: leds: 'green', 'red' do not match any of the regexes: '(^led-[0-9a-f]$|led)', 'pinctrl-[0-9]+'
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
arch/arm/boot/dts/stih410-b2260.dts | 8 ++++----
arch/arm/boot/dts/stih418-b2199.dts | 4 ++--
arch/arm/boot/dts/stih418-b2264.dts | 2 +-
arch/arm/boot/dts/stihxxx-b2120.dtsi | 4 ++--
4 files changed, 9 insertions(+), 9 deletions(-)
diff --git a/arch/arm/boot/dts/stih410-b2260.dts b/arch/arm/boot/dts/stih410-b2260.dts
index 26d93f26f6d0..240b62040000 100644
--- a/arch/arm/boot/dts/stih410-b2260.dts
+++ b/arch/arm/boot/dts/stih410-b2260.dts
@@ -27,26 +27,26 @@ aliases {
leds {
compatible = "gpio-leds";
- user_green_1 {
+ led-user-green-1 {
label = "User_green_1";
gpios = <&pio1 3 GPIO_ACTIVE_LOW>;
linux,default-trigger = "heartbeat";
default-state = "off";
};
- user_green_2 {
+ led-user-green-2 {
label = "User_green_2";
gpios = <&pio4 1 GPIO_ACTIVE_LOW>;
default-state = "off";
};
- user_green_3 {
+ led-user-green-3 {
label = "User_green_3";
gpios = <&pio2 1 GPIO_ACTIVE_LOW>;
default-state = "off";
};
- user_green_4 {
+ led-user-green-4 {
label = "User_green_4";
gpios = <&pio2 5 GPIO_ACTIVE_LOW>;
default-state = "off";
diff --git a/arch/arm/boot/dts/stih418-b2199.dts b/arch/arm/boot/dts/stih418-b2199.dts
index d21bcc7c1271..53ac6c2b7b7d 100644
--- a/arch/arm/boot/dts/stih418-b2199.dts
+++ b/arch/arm/boot/dts/stih418-b2199.dts
@@ -26,12 +26,12 @@ aliases {
leds {
compatible = "gpio-leds";
- red {
+ led-red {
label = "Front Panel LED";
gpios = <&pio4 1 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "heartbeat";
};
- green {
+ led-green {
gpios = <&pio1 3 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
diff --git a/arch/arm/boot/dts/stih418-b2264.dts b/arch/arm/boot/dts/stih418-b2264.dts
index a99604bebf8c..34a518b037ab 100644
--- a/arch/arm/boot/dts/stih418-b2264.dts
+++ b/arch/arm/boot/dts/stih418-b2264.dts
@@ -76,7 +76,7 @@ aliases {
soc {
leds {
compatible = "gpio-leds";
- green {
+ led-green {
gpios = <&pio1 3 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
diff --git a/arch/arm/boot/dts/stihxxx-b2120.dtsi b/arch/arm/boot/dts/stihxxx-b2120.dtsi
index 2aa94605d3d4..920a0bad7494 100644
--- a/arch/arm/boot/dts/stihxxx-b2120.dtsi
+++ b/arch/arm/boot/dts/stihxxx-b2120.dtsi
@@ -9,12 +9,12 @@
/ {
leds {
compatible = "gpio-leds";
- red {
+ led-red {
label = "Front Panel LED";
gpios = <&pio4 1 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "heartbeat";
};
- green {
+ led-green {
gpios = <&pio1 3 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
--
2.34.1
On Fri, 25 Nov 2022 15:41:16 +0100, Krzysztof Kozlowski wrote: > The node names should be generic and DT schema expects certain pattern: > > stih407-b2120.dtb: leds: 'green', 'red' do not match any of the regexes: '(^led-[0-9a-f]$|led)', 'pinctrl-[0-9]+' > > Applied, thanks! [1/1] ARM: dts: sti: align LED node names with dtschema https://git.kernel.org/krzk/linux-dt/c/91bf30a42b16257f98345c9ba519d72babbbaf8a Best regards, -- Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Hi Krzysztof On 11/25/22 15:41, Krzysztof Kozlowski wrote: > The node names should be generic and DT schema expects certain pattern: > > stih407-b2120.dtb: leds: 'green', 'red' do not match any of the regexes: '(^led-[0-9a-f]$|led)', 'pinctrl-[0-9]+' > > Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> > --- > arch/arm/boot/dts/stih410-b2260.dts | 8 ++++---- > arch/arm/boot/dts/stih418-b2199.dts | 4 ++-- > arch/arm/boot/dts/stih418-b2264.dts | 2 +- > arch/arm/boot/dts/stihxxx-b2120.dtsi | 4 ++-- > 4 files changed, 9 insertions(+), 9 deletions(-) > > diff --git a/arch/arm/boot/dts/stih410-b2260.dts b/arch/arm/boot/dts/stih410-b2260.dts > index 26d93f26f6d0..240b62040000 100644 > --- a/arch/arm/boot/dts/stih410-b2260.dts > +++ b/arch/arm/boot/dts/stih410-b2260.dts > @@ -27,26 +27,26 @@ aliases { > > leds { > compatible = "gpio-leds"; > - user_green_1 { > + led-user-green-1 { > label = "User_green_1"; > gpios = <&pio1 3 GPIO_ACTIVE_LOW>; > linux,default-trigger = "heartbeat"; > default-state = "off"; > }; > > - user_green_2 { > + led-user-green-2 { > label = "User_green_2"; > gpios = <&pio4 1 GPIO_ACTIVE_LOW>; > default-state = "off"; > }; > > - user_green_3 { > + led-user-green-3 { > label = "User_green_3"; > gpios = <&pio2 1 GPIO_ACTIVE_LOW>; > default-state = "off"; > }; > > - user_green_4 { > + led-user-green-4 { > label = "User_green_4"; > gpios = <&pio2 5 GPIO_ACTIVE_LOW>; > default-state = "off"; > diff --git a/arch/arm/boot/dts/stih418-b2199.dts b/arch/arm/boot/dts/stih418-b2199.dts > index d21bcc7c1271..53ac6c2b7b7d 100644 > --- a/arch/arm/boot/dts/stih418-b2199.dts > +++ b/arch/arm/boot/dts/stih418-b2199.dts > @@ -26,12 +26,12 @@ aliases { > > leds { > compatible = "gpio-leds"; > - red { > + led-red { > label = "Front Panel LED"; > gpios = <&pio4 1 GPIO_ACTIVE_HIGH>; > linux,default-trigger = "heartbeat"; > }; > - green { > + led-green { > gpios = <&pio1 3 GPIO_ACTIVE_HIGH>; > default-state = "off"; > }; > diff --git a/arch/arm/boot/dts/stih418-b2264.dts b/arch/arm/boot/dts/stih418-b2264.dts > index a99604bebf8c..34a518b037ab 100644 > --- a/arch/arm/boot/dts/stih418-b2264.dts > +++ b/arch/arm/boot/dts/stih418-b2264.dts > @@ -76,7 +76,7 @@ aliases { > soc { > leds { > compatible = "gpio-leds"; > - green { > + led-green { > gpios = <&pio1 3 GPIO_ACTIVE_HIGH>; > default-state = "off"; > }; > diff --git a/arch/arm/boot/dts/stihxxx-b2120.dtsi b/arch/arm/boot/dts/stihxxx-b2120.dtsi > index 2aa94605d3d4..920a0bad7494 100644 > --- a/arch/arm/boot/dts/stihxxx-b2120.dtsi > +++ b/arch/arm/boot/dts/stihxxx-b2120.dtsi > @@ -9,12 +9,12 @@ > / { > leds { > compatible = "gpio-leds"; > - red { > + led-red { > label = "Front Panel LED"; > gpios = <&pio4 1 GPIO_ACTIVE_HIGH>; > linux,default-trigger = "heartbeat"; > }; > - green { > + led-green { > gpios = <&pio1 3 GPIO_ACTIVE_HIGH>; > default-state = "off"; > }; Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com> Thanks Patrice
© 2016 - 2025 Red Hat, Inc.